When I wrote commit 3cad1bc0 ("filelock: Remove locks reliably when
fcntl/close race is detected"), I missed that there are two copies of the
code I was patching: The normal version, and the version for 64-bit offsets
on 32-bit kernels.
Thanks to Greg KH for stumbling over this while doing the stable
backport...

Apply exactly the same fix to the compat path for 32-bit kernels.

Fixes: c293621b ("[PATCH] stale POSIX lock handling")
Cc: stable@kernel.org
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563


Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240723-fs-lock-recover-compatfix-v1-1-148096719529@google.com


Signed-off-by: Christian Brauner <brauner@kernel.org>

The counter is unconditionally incremented for each mount allocation.
If we set it to 1ULL << 32 we're losing 4294967296 as the first valid
non-32 bit mount id.

Link: https://lore.kernel.org/r/20240719-work-mount-namespace-v1-1-834113cab0d2@kernel.org


Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Set the maximum size of a subrequest that writes to cachefiles to be
MAX_RW_COUNT so that we don't overrun the maximum write we can make to the
backing filesystem.

Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/1599005.1721398742@warthog.procyon.org.uk


cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

When netfslib is performing writeback (ie. ->writepages), it maintains two
parallel streams of writes, one to the server and one to the cache, but it
doesn't mark either stream of writes as active until it gets some data that
needs to be written to that stream.

This is done because some folios will only be written to the cache
(e.g. copying to the cache on read is done by marking the folios and
letting writeback do the actual work) and sometimes we'll only be writing
to the server (e.g. if there's no cache).

Now, since we don't actually dispatch uploads and cache writes in parallel,
but rather flip between the streams, depending on which has the lowest
so-far-issued offset, and don't wait for the subreqs to finish before
flipping, we can end up in a situation where, say, we issue a write to the
server and this completes before we start the write to the cache.

But because we only activate a stream when we first add a subreq to it, the
result collection code may run before we manage to activate the stream -
resulting in the folio being cleaned and having the writeback-in-progress
mark removed.  At this point, the folio no longer belongs to us.

This is only really a problem for folios that need to be written to both
streams - and in that case, the upload to the server is started first,
followed by the write to the cache - and the cache write may see a bad
folio.

Fix this by activating the cache stream up front if there's a cache
available.  If there's a cache, then all data is going to be written to it.

Fixes: 288ace2f

 ("netfs: New writeback implementation")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/1599053.1721398818@warthog.procyon.org.uk


cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

Add selftests to verify that deriving namespace file descriptors from
pidfd file descriptors works correctly.

Link: https://lore.kernel.org/r/20240722-work-pidfs-69dbea91edab@brauner


Signed-off-by: Christian Brauner <brauner@kernel.org>

The nsproxy structure contains nearly all of the namespaces associated
with a task. When a given namespace type is not supported by this kernel
the rules whether the corresponding pointer in struct nsproxy is NULL or
always init_<ns_type>_ns differ per namespace. Ideally, that wouldn't be
the case and for all namespace types we'd always set it to
init_<ns_type>_ns when the corresponding namespace type isn't supported.

Make sure we handle all namespaces where the pointer in struct nsproxy
can be NULL when the namespace type isn't supported.

Link: https://lore.kernel.org/r/20240722-work-pidfs-e6a83030f63e@brauner
Fixes: 5b08bd40

 ("pidfs: allow retrieval of namespace file descriptors") # mainline only
Signed-off-by: Christian Brauner <brauner@kernel.org>

syzbot call pidfd_ioctl() with cmd "PIDFD_GET_TIME_NAMESPACE" and disabled
CONFIG_TIME_NS, since time_ns is NULL, it will make NULL ponter deref in
open_namespace.

Fixes: 5b08bd40

 ("pidfs: allow retrieval of namespace file descriptors") # mainline only
Reported-and-tested-by:  <syzbot+34a0ee986f61f15da35d@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=34a0ee986f61f15da35d


Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://lore.kernel.org/r/tencent_7FAE8DB725EE0DD69236DDABDDDE195E4F07@qq.com


Signed-off-by: Christian Brauner <brauner@kernel.org>

correct the comments of vfs_*() helpers in fs/namei.c, including:
1. vfs_create()
2. vfs_mknod()
3. vfs_mkdir()
4. vfs_rmdir()
5. vfs_symlink()

All of them come from the same commit:
6521f891

 "namei: prepare for idmapped mounts"

The @dentry is actually the dentry of child directory rather than
base directory(parent directory), and thus the @dir has to be
modified due to the change of @dentry.

Signed-off-by: Congjie Zhou <zcjie0802@qq.com>
Link: https://lore.kernel.org/r/tencent_2FCF6CC9E10DC8A27AE58A5A0FE4FCE96D0A@qq.com


Signed-off-by: Christian Brauner <brauner@kernel.org>

Lockless hash lookup can find and lock the inode after it gets the
I_FREEING flag set, at which point it blocks waiting for teardown in
evict() to finish.

However, the flag is still set even after evict() wakes up all waiters.

This results in a race where if the inode lock is taken late enough, it
can happen after both hash removal and wakeups, meaning there is nobody
to wake the racing thread up.

This worked prior to RCU-based lookup because the entire ordeal was
synchronized with the inode hash lock.

Since unhashing requires the inode lock, we can safely check whether it
happened after acquiring it.

Link: https://lore.kernel.org/v9fs/20240717102458.649b60be@kernel.org/


Reported-by: Dominique Martinet <asmadeus@codewreck.org>
Fixes: 7180f8d9

 ("vfs: add rcu-based find_inode variants for iget ops")
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240718151838.611807-1-mjguzik@gmail.com


Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>

CONFIG_FSCACHE_DEBUG should have been renamed to CONFIG_NETFS_DEBUG, so do
that now.

Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/1410796.1721333406@warthog.procyon.org.uk


cc: Uwe Kleine-König <ukleinek@kernel.org>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

Revert commit 163eae0f

 to get back the
original operation of the debugging macros.

Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240608151352.22860-2-ukleinek@kernel.org
Link: https://lore.kernel.org/r/1410685.1721333252@warthog.procyon.org.uk


cc: Uwe Kleine-König <ukleinek@kernel.org>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull smb server fixes from Steve French:

 - two durable handle improvements

 - two small cleanup patches

* tag '6.11-rc-smb3-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: add durable scavenger timer
  ksmbd: avoid reclaiming expired durable opens by the client
  ksmbd: Constify struct ksmbd_transport_ops
  ksmbd: remove duplicate SMB2 Oplock levels definitions

Merge tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

 - In the series "treewide: Refactor heap related implementation",
   Kuan-Wei Chiu has significantly reworked the min_heap library code
   and has taught bcachefs to use the new more generic implementation.

 - Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
   reworks the cpumask and nodemask headers to make things generally
   more rational.

 - Kuan-Wei Chiu has sent along some maintenance work against our
   sorting library code in the series "lib/sort: Optimizations and
   cleanups".

 - More library maintainance work from Christophe Jaillet in the series
   "Remove usage of the deprecated ida_simple_xx() API".

 - Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
   series "nilfs2: eliminate the call to inode_attach_wb()".

 - Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix
   GDB command error".

 - Plus...

Pull MM updates from Andrew Morton:

 - In the series "mm: Avoid possible overflows in dirty throttling" Jan
   Kara addresses a couple of issues in the writeback throttling code.
   These fixes are also targetted at -stable kernels.

 - Ryusuke Konishi's series "nilfs2: fix potential issues related to
   reserved inodes" does that. This should actually be in the
   mm-nonmm-stable tree, along with the many other nilfs2 patches. My
   bad.

 - More folio conversions from Kefeng Wang in the series "mm: convert to
   folio_alloc_mpol()"

 - Kemeng Shi has sent some cleanups to the writeback code in the series
   "Add helper functions to remove repeated code and improve readability
   of cgroup writeback"

 - Kairui Song has made the swap code a little smaller and a little
   faster in the series "mm/swap: clean up and optimize swap cache
   index".

 - In the series "mm/memory: cleanly support zeropage in
   vm_i...

Pull RTC updates from Alexandre Belloni:
 "Subsystem:
   - add missing MODULE_DESCRIPTION() macro
   - fix offset addition for alarms

  Drivers:
   - isl1208: alarm clearing fixes
   - mcp794xx: oscillator failure detection
   - stm32: stm32mp25 support
   - tps6594: power management support"

* tag 'rtc-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: stm32: add new st,stm32mp25-rtc compatible and check RIF configuration
  dt-bindings: rtc: stm32: introduce new st,stm32mp25-rtc compatible
  rtc: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  rtc: interface: Add RTC offset to alarm after fix-up
  rtc: ds1307: Clamp year to valid BCD (0-99) in `set_time()`
  rtc: ds1307: Detect oscillator fail on mcp794xx
  rtc: isl1208: Update correct procedure for clearing alarm
  rtc: isl1208: Add a delay for clearing alarm
  dt-bindings: rtc: Convert rtc-fsl-ftm-alarm.txt to yaml format
  rtc: add missing MODULE_DESCRIPTION() macro
  rtc: abx80x: Fix return value of nvmem callback on read
  rtc: cmos: Fix return value of nvmem callbacks
  rtc: isl1208: Fix return value of nvmem callbacks
  rtc: tps6594: Add power management support
  rtc: tps6594: introduce private structure as drvdata
  rtc: tps6594: Fix memleak in probe

Pull smb client fixes from Steve French:
 "Six smb3 client fixes, most for stable including important netfs fixes:

   - various netfs related fixes for cifs addressing some regressions in
     6.10 (e.g. generic/708 and some multichannel crediting related
     issues)

   - fix for a noisy log message on copy_file_range

   - add trace point for read/write credits"

* tag '6.11-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix missing fscache invalidation
  cifs: Add a tracepoint to track credits involved in R/W requests
  cifs: Fix setting of zero_point after DIO write
  cifs: Fix missing error code set
  cifs: Fix server re-repick on subrequest retry
  cifs: fix noisy message on copy_file_range

Pull pin control updates from Linus Walleij:
 "Some new drivers is the main part, the rest is cleanups and nonurgent
  fixes.

  Nothing much special about this, no core changes this time.

  New drivers:

   - Renesas RZ/V2H(P) SoC

   - NXP Freescale i.MX91 SoC

   - Nuvoton MA35D1 SoC

   - Qualcomm PMC8380, SM4250, SM4250 LPI

  Enhancements:

   - A slew of scoped-based simplifications of of_node_put()"

* tag 'pinctrl-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
  pinctrl: renesas: rzg2l: Support output enable on RZ/G2L
  pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions
  pinctrl: renesas: rzg2l: Clarify OEN read/write support
  dt-bindings: pinctrl: pinctrl-single: Fix pinctrl-single,gpio-range description
  dt-bindings: pinctrl: npcm8xx: add missing pin group and mux function
  dt-bindings: pinctrl: pinctrl-single: fix schmitt rel...

Pull kvm updates from Paolo Bonzini:
 "ARM:

   - Initial infrastructure for shadow stage-2 MMUs, as part of nested
     virtualization enablement

   - Support for userspace changes to the guest CTR_EL0 value, enabling
     (in part) migration of VMs between heterogenous hardware

   - Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
     of the protocol

   - FPSIMD/SVE support for nested, including merged trap configuration
     and exception routing

   - New command-line parameter to control the WFx trap behavior under
     KVM

   - Introduce kCFI hardening in the EL2 hypervisor

   - Fixes + cleanups for handling presence/absence of FEAT_TCRX

   - Miscellaneous fixes + documentation updates

  LoongArch:

   - Add paravirt steal time support

   - Add support for KVM_DIRTY_LOG_INITIALLY_SET

   - Add perf kvm-stat support for loongarch

  RISC-V:

   - Redirect AMO load/store access fault traps to guest

   - perf...

A network filesystem needs to implement a netfslib hook to invalidate
fscache if it's to be able to use the cache.

Fix cifs to implement the cache invalidation hook.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 3ee1a1fc

 ("cifs: Cut over to using netfslib")
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull MTD updates from Miquel Raynal:
 "Nothing stands out for this merge window, mostly minor fixes, such as
  module descriptions, the use of debug macros and Makefile
  improvements.

  Raw NAND changes;

   - The Freescale MXC driver has been converted to the newer
     '->exec_op()' interface

   - The meson driver now supports handling the boot ROM area with very
     specific ECC needs

   - Support for the iMX8QXP has been added to the GPMI driver

   - The lpx32xx driver now can get the DMA channels using DT entries

   - The Qcom binding has been improved to be more future proof by Rob

   - And then there is the usual load of misc and minor changes

  SPI-NAND changes:

   - The Macronix vendor driver has been improved to support an extended
     ID to avoid conflicting with older devices after an ID reuse issue

  SPI NOR changes:

   - Drop support for Xilinx S3AN flashes. These flashes are for the
     very old Xilinx Spartan 3 FPGAs and they need some awkward code in
     the core to support.

     Drop support for these flashes, along with the special handling we
     needed for them in the core like non-power-of-2 page size handling
     and the .setup() callback.

   - Fix regression for old w25q128 flashes without SFDP tables.

     Commit 83e824a4 ("mtd: spi-nor: Correct flags for Winbond
     w25q128") dropped support for such devices under the assumption
     that they aren't being used anymore. Users have now surfaced [0] so
     fix the regression by supporting both kind of devices.

   - Core cleanups including removal of SPI_NOR_NO_FR flag and
     simplification of spi_nor_get_flash_info()"

Link: https://lore.kernel.org/r/CALxbwRo_-9CaJmt7r7ELgu+vOcgk=xZcGHobnKf=oT2=u4d4aA@mail.gmail.com/ [0]

* tag 'mtd/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (28 commits)
  mtd: rawnand: lpx32xx: Fix dma_request_chan() error checks
  mtd: spinand: macronix: Add support for serial NAND flash
  mtd: spinand: macronix: Add support for reading Device ID 2
  mtd: rawnand: lpx32xx: Request DMA channels using DT entries
  dt-bindings: mtd: qcom,nandc: Define properties at top-level
  mtd: rawnand: intel: use 'time_left' variable with wait_for_completion_timeout()
  mtd: rawnand: mxc: use 'time_left' variable with wait_for_completion_timeout()
  mtd: rawnand: gpmi: add iMX8QXP support.
  mtd: rawnand: gpmi: add 'support_edo_timing' in gpmi_devdata
  mtd: cmdlinepart: Replace `dbg()` macro with `pr_debug()`
  mtd: add missing MODULE_DESCRIPTION() macros
  mtd: make mtd_test.c a separate module
  dt-bindings: mtd: gpmi-nand: Add 'fsl,imx8qxp-gpmi-nand' compatible string
  mtd: rawnand: cadence: remove unused struct 'ecc_info'
  mtd: rawnand: mxc: support software ECC
  mtd: rawnand: mxc: implement exec_op
  mtd: rawnand: mxc: separate page read from ecc calc
  mtd: spi-nor: winbond: fix w25q128 regression
  mtd: spi-nor: simplify spi_nor_get_flash_info()
  mtd: spi-nor: get rid of SPI_NOR_NO_FR
  ...

Pull landlock updates from Mickaël Salaün:
 "This simplifies code and improves documentation"

* tag 'landlock-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Various documentation improvements
  landlock: Clarify documentation for struct landlock_ruleset_attr
  landlock: Use bit-fields for storing handled layer access masks

Merge tag 'firewire-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire updates from Takashi Sakamoto:
 "There are many lines of changes for FireWire subsystem, but there is
  practically no functional change.

  Most of the changes are for code refactoring, some KUnit tests to
  added helper functions, and new tracepoints events for both the core
  functions and 1394 OHCI driver.

  The tracepoints events now cover the verbose logging enabled by debug
  parameter of firewire-ohci kernel module. The parameter would be
  removed in any future timing, thus it is now deprecated"

* tag 'firewire-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (32 commits)
  firewire: core: move copy_port_status() helper function to TP_fast_assign() block
  Revert "firewire: ohci: use common macro to interpret be32 data in le32 buffer"
  firewire: ohci: add tracepoints event for data of Self-ID DMA
  firewire: ohci: use inline functions to operate data of self-ID DMA
  firewire: ohci: add static inline functions to deserialize for Self-ID DMA operation
  firewire: ohci: use static function to handle endian issue on PowerPC platform
  firewire: ohci: use common macro to interpret be32 data in le32 buffer
  firewire: core: Fix spelling mistakes in tracepoint messages
  firewire: ohci: add tracepoints event for hardIRQ event
  firewire: ohci: add support for Linux kernel tracepoints
  firewire: core: add tracepoints events for completions of packets in isochronous context
  firewire: core: add tracepoints events for queueing packets of isochronous context
  firewire: core: add tracepoints events for flushing completions of isochronous context
  firewire: core: add tracepoints events for flushing of isochronous context
  firewire: core: add tracepoints events for starting/stopping of isochronous context
  firewire: core: add tracepoints events for setting channels of multichannel context
  firewire: core: add tracepoints events for allocation/deallocation of isochronous context
  firewire: core: undefine macros after use in tracepoints events
  firewire: core: record card index in tracepoints event for self ID sequence
  firewire: core: use inline helper functions to serialize phy config packet
  ...

Pull libnvdimm updates from Ira Weiny:

 - One small cleanup to use sizeof(*pointer)

 - Add MODULE_DESCRIPTIONS() to eliminate make W=1 warnings

* tag 'libnvdimm-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  testing: nvdimm: Add MODULE_DESCRIPTION() macros
  testing: nvdimm: iomap: add MODULE_DESCRIPTION()
  dax: add missing MODULE_DESCRIPTION() macros
  nvdimm: add missing MODULE_DESCRIPTION() macros
  ACPI: NFIT: add missing MODULE_DESCRIPTION() macro
  nvdimm/btt: use sizeof(*pointer) instead of sizeof(type)

Pull RISC-V updates from Palmer Dabbelt:

 - Support for various new ISA extensions:
     * The Zve32[xf] and Zve64[xfd] sub-extensios of the vector
       extension
     * Zimop and Zcmop for may-be-operations
     * The Zca, Zcf, Zcd and Zcb sub-extensions of the C extension
     * Zawrs

 - riscv,cpu-intc is now dtschema

 - A handful of performance improvements and cleanups to text patching

 - Support for memory hot{,un}plug

 - The highest user-allocatable virtual address is now visible in
   hwprobe

* tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (58 commits)
  riscv: lib: relax assembly constraints in hweight
  riscv: set trap vector earlier
  KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
  KVM: riscv: Support guest wrs.nto
  riscv: hwprobe: export Zawrs ISA extension
  riscv: Add Zawrs support for spinlocks
  dt-bindings: riscv: Add Zawrs ISA extension description
  riscv: Provide a definition for 'pause'
  riscv: hwprobe: export highest virtual userspace address
  riscv: Improve sbi_ecall() code generation by reordering arguments
  riscv: Add tracepoints for SBI calls and returns
  riscv: Optimize crc32 with Zbc extension
  riscv: Enable DAX VMEMMAP optimization
  riscv: mm: Add support for ZONE_DEVICE
  virtio-mem: Enable virtio-mem for RISC-V
  riscv: Enable memory hotplugging for RISC-V
  riscv: mm: Take memory hotplug read-lock during kernel page table dump
  riscv: mm: Add memory hotplugging support
  riscv: mm: Add pfn_to_kaddr() implementation
  riscv: mm: Refactor create_linear_mapping_range() for memory hot add
  ...

Pull MIPS updates from Thomas Bogendoerfer:

 - add support for Realtek RTL9302C

 - add support for Mobileye EyeQ6H

 - add support for Mobileye EyeQ OLB system controller

 - improve r4k clocksource

 - add mode for emulating ieee754 NAN2008

 - rework for BMIPS CBR address handling

 - fixes for Loongson 2K1000

 - defconfig updates

 - cleanups and fixes

* tag 'mips_6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits)
  MIPS: config: Add ip30_defconfig
  MIPS: config: lemote2f: Regenerate defconfig
  MIPS: config: generic: Add board-litex
  MIPS: config: Enable MSA and virtualization for MIPS64R6
  MIPS: Fix fallback march for SB1
  mips: dts: realtek: Add RTL9302C board
  mips: generic: add fdt fixup for Realtek reference board
  mips: select REALTEK_OTTO_TIMER for Realtek platforms
  dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc
  dt-bindings: mips: realtek: Add rtl930x-soc compatible
  dt-bindings: vendor-prefixes: Add Cameo Communications
  mips: dts: realtek: add device_type property to cpu node
  mips: dts: realtek: use "serial" instead of "uart" in node name
  MIPS: Implement ieee754 NAN2008 emulation mode
  MIPS: lantiq: improve USB initialization
  MIPS: GIC: Generate redirect block accessors
  MIPS: CPS: Add a couple of multi-cluster utility functions
  MIPS: Octeron: remove source file executable bit
  MAINTAINERS: Mobileye: add OLB drivers and dt-bindings
  MIPS: mobileye: eyeq5: add OLB system-controller node
  ...

Raw NAND changes;

The Freescale MXC driver has been converted to the newer ->exec_op()
interface. The meson driver now supports handling the boot ROM area with
very specific ECC needs. Support for the iMX8QXP has been added to the
GPMI driver. The lpx32xx driver now can get the DMA channels using DT
entries. The Qcom binding has been improved to be more future proof by
Rob. And then there is the usual load of misc and minor changes.

SPI-NAND changes:

The Macronix vendor driver has been improved to support an extended ID
to avoid conflicting with older devices after an ID reuse issue.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

SPI NOR changes for 6.11

Notable changes:

- Drop support for Xilinx S3AN flashes. These flashes are for the very
  old Xilinx Spartan 3 FPGAs and they need some awkward code in the core
  to support. Drop support for these flashes, along with the special
  handling we needed for them in the core like non-power-of-2 page size
  handling and the .setup() callback.

- Fix regression for old w25q128 flashes without SFDP tables. Commit
  83e824a4 ("mtd: spi-nor: Correct flags for Winbond w25q128")
  dropped support for such devices under the assumption that they aren't
  being used anymore. Users have now surfaced [0] so fix the regression
  by supporting both kind of devices.

- Core cleanups including removal of SPI_NOR_NO_FR flag and
  simplification of spi_nor_get_flash_info().

[0] https://lore.kernel.org/r/CALxbwRo_-9CaJmt7r7ELgu+vOcgk=xZcGHobnKf=oT2=u4d4aA@mail.gmail.com/



Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Pull powerpc updates from Michael Ellerman:

 - Remove support for 40x CPUs & platforms

 - Add support to the 64-bit BPF JIT for cpu v4 instructions

 - Fix PCI hotplug driver crash on powernv

 - Fix doorbell emulation for KVM on PAPR guests (nestedv2)

 - Fix KVM nested guest handling of some less used SPRs

 - Online NUMA nodes with no CPU/memory if they have a PCI device
   attached

 - Reduce memory overhead of enabling kfence on 64-bit Radix MMU kernels

 - Reimplement the iommu table_group_ops for pseries for VFIO SPAPR TCE

Thanks to: Anjali K, Artem Savkov, Athira Rajeev, Breno Leitao, Brian
King, Celeste Liu, Christophe Leroy, Esben Haabendal, Gaurav Batra,
Gautam Menghani, Haren Myneni, Hari Bathini, Jeff Johnson, Krishna
Kumar, Krzysztof Kozlowski, Nathan Lynch, Nicholas Piggin, Nick Bowler,
Nilay Shroff, Rob Herring (Arm), Shawn Anastasio, Shivaprasad G Bhat,
Sourabh Jain, Srikar Dronamraju, Timothy Pea...

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Define PCIE_RESET_CONFIG_DEVICE_WAIT_MS for the generic 100ms
     required after reset before config access (Kevin Xie)

   - Define PCIE_T_RRS_READY_MS for the generic 100ms required after
     reset before config access (probably should be unified with
     PCIE_RESET_CONFIG_DEVICE_WAIT_MS) (Damien Le Moal)

  Resource management:

   - Rename find_resource() to find_resource_space() to be more
     descriptive (Ilpo Järvinen)

   - Export find_resource_space() for use by PCI core, which needs to
     learn whether there is available space for a bridge window (Ilpo
     Järvinen)

   - Prevent double counting of resources so window size doesn't grow on
     each remove/rescan cycle (Ilpo Järvinen)

   - Relax bridge window sizing algorithm so a device doesn't break
     simply because it was removed and rescanned (Ilpo Järvinen)

   - Evaluate the ACPI PRE...

Pull input updates from Dmitry Torokhov:

 - streamlined logic in input core for handling normal input handlers vs
   input filters

 - updates to input drivers to allocate memory with sizeof(*pointer)
   instead of sizeof(type)

 - change to ads7846 touchscreen driver to use hsync GPIO instead of
   requiring platform data with special method (which is not compatible
   with boards using device tree)

 - update to adc-joystick driver to handle inverted axes

 - cleanups in various drivers switching them to use the new "guard" and
   "__free()" facilities

 - changes to several drivers (adxl34x, atmel_mxt_ts, ati-remote2,
   omap-keypad, yealink) to stop creating driver-specific device
   attributes manually and use driver core facilities for this

 - update to Cypress PS/2 protocol driver to properly handle errors from
   the PS/2 transport as well as other cleanups

 - update to edt-ft5x06 driver to support ft5426 variant

 - update to ektf2127 driver to support ektf2232 variant

 - update to exc3000 driver to support EXC81W32 variant

 - update to imagis driver to support IST3038 variant

 - other assorted driver cleanups.

* tag 'input-for-v6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits)
  Input: yealink - simplify locking in sysfs attribute handling
  Input: yealink - use driver core to instantiate device attributes
  Input: ati-remote2 - use driver core to instantiate device attributes
  Input: omap-keypad - use driver core to instantiate device attributes
  Input: atmel_mxt_ts - use driver core to instantiate device attributes
  Input: exc3000 - add EXC81W32 support
  dt-bindings: input: touchscreen: exc3000: add EXC81W32
  Input: twl4030-pwrbutton - fix kernel-doc warning
  Input: himax_hx83112b - add support for HX83100A
  Input: himax_hx83112b - add himax_chip struct for multi-chip support
  Input: himax_hx83112b - implement MCU register reading
  Input: himax_hx83112b - use more descriptive register defines
  dt-bindings: input: touchscreen: himax,hx83112b: add HX83100A
  Input: do not check number of events in input_pass_values()
  Input: preallocate memory to hold event values
  Input: rearrange input_alloc_device() to prepare for preallocating of vals
  Input: simplify event handling logic
  Input: make events() method return number of events processed
  Input: make sure input handlers define only one processing method
  Input: evdev - remove ->event() method
  ...

Pull i2c fixes from Wolfram Sang:
 "The I2C core gains documentation updates for the testunit, a cleanup
  regarding unneeded 'driver_data' and more sanity checks in the char
  device.

  For the host drivers, this release includes significant updates, with
  the primary change being the renaming from "master/slave" to
  "controller/target" to adhere to I2C v7 and SMBus 3.2 standards.

  New Support:

   - Added support for Intel Arrow Lake-H
   - Added I2C support in the Arioha SoC by linking the Mediatek I2C
     controller

  Cleanups:

   - Added the MODULE_DESCRIPTION() macro, resolving a modpost warning
     in the ALi 1563 Southbridge driver.
   - Constified the regmap_config declaration in the i2c-designware
     driver.
   - Improved the coding style in the Renesas R-Car driver by removing
     unnecessary semicolons after brackets.

  General improvements:

   - In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
     RUNTIME_PM_OPS to enable waking up the controller during suspend()
     before suspend_noirq() kicks in.
   - Improved logging in the Xilinx driver.
   - Added a warning (WARN()) in the Renesas R-Car driver for spurious
     interrupts.

  DTS Changes:

   - Removed address-cell and size-cell from the Atmel at91sam, nVidia
     Tegra 20, and Samsung S3c2410 devices.
   - Fixed Texas Instruments OMAP4 I2C controller to comply with the
     i2c-controller.yaml schema.
   - Improved indentation in DTS examples for several I2C devices.
   - Converted the NXP LPC1788 binding to the dt-schema.
   - Added documentation for the compatible string thead,th1520-i2c.
   - Added the "power-domains" property for the Meson I2C driver.

  AT24 EEPROM driver changes:

   - add support for two new Microchip models
   - document even more new models in DT bindings (those use fallback
     compatibles so no code changes)"

* tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (87 commits)
  i2c: document new callbacks in i2c_algorithm
  dt-bindings: i2c: amlogic,meson6-i2c: add optional power-domains
  dt-bindings: i2c: at91: Add sama7d65 compatible string
  i2c: st: reword according to newest specification
  i2c: cpm: reword according to newest specification
  i2c: virtio: reword according to newest specification
  i2c: nvidia-gpu: reword according to newest specification
  i2c: viai2c: reword according to newest specification
  i2c: viperboard: reword according to newest specification
  i2c: uniphier: reword according to newest specification
  i2c: uniphier-f: reword according to newest specification
  i2c: tiny-usb: reword according to newest specification
  i2c: thunderx-pcidrv: reword according to newest specification
  i2c: tegra-bpmp: reword according to newest specification
  i2c: taos-evm: reword according to newest specification
  i2c: sun6i-p2wi: reword according to newest specification
  i2c: stm32f4: reword according to newest specification
  i2c: sprd: reword according to newest specification
  i2c: sis5595: reword according to newest specification
  i2c: rzv2m: reword according to newest specification
  ...

Pull char / misc and other driver updates from Greg KH:
 "Here is the "big" set of char/misc and other driver subsystem changes
  for 6.11-rc1. Nothing major in here, just loads of new drivers and
  updates. Included in here are:

   - IIO api updates and new drivers added

   - wait_interruptable_timeout() api cleanups for some drivers

   - MODULE_DESCRIPTION() additions for loads of drivers

   - parport out-of-bounds fix

   - interconnect driver updates and additions

   - mhi driver updates and additions

   - w1 driver fixes

   - binder speedups and fixes

   - eeprom driver updates

   - coresight driver updates

   - counter driver update

   - new misc driver additions

   - other minor api updates

  All of these, EXCEPT for the final Kconfig build fix for 32bit
  systems, have been in linux-next for a while with no reported issues.
  The Kconfig fixup went in 29 hours ago, so might have missed the...

Pull staging driver updates from Greg KH:
 "This is the "big" staging driver update for 6.11-rc1. Not really all
  that much happened this release cycle, just lots of tiny cleanups,
  overall about 3000 lines removed, so the cleanups were worth it.

  Included in here are:

   - loads of rtl8723bs driver cleanups

   - lots of rtl8192e driver cleanups

   - vc04_services reworks and cleanups as that codebase gets slowly
     evolved into something that will make it into the "real" part of
     the kernel hopefully soon.

   - other tiny staging driver cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (124 commits)
  staging: rtl8723bs: Remove constant result function CheckNegative()
  staging: rtl8723bs: Remove unused macros in rtw_mlme_ext.h
  staging: rtl8723bs: Remove unused macros in hal_pwr_seq.h
  staging: rtl8723bs: Remove unused macros in rtw_efuse.h
  staging: rtl8723bs: Remove unused macros in rtw_mlme.h
  staging: rtl8723bs: Remove unused macros in HalPwrSeqCmd.h
  staging: rtl8723bs: Remove unused macros in Hal8723BReg.h
  staging: rtl8723bs: Remove unused macros in Hal8192CPhyReg.h
  staging: rtl8723bs: Delete file hal_phy_reg_8723b.h
  staging: rtl8723bs: Move last macro from hal_phy_reg_8723b.h
  staging: rtl8723bs: Remove unused macros in hal_phy_reg_8723b.h
  staging: rtl8723bs: Remove unused macros in hal_com_reg.h
  staging: rtl8723bs: Remove unused macros in rtw_ht.h
  staging: rtl8723bs: Remove unused macros in hal_com_h2c.h
  staging: vc04_services: vchiq_core: Stop kthreads on vchiq module unload
  staging: vchiq_core: Bubble up wait_event_interruptible() return value
  staging: nvec: Use x instead of x != NULL to improve readability.
  staging: rtl8192e: Fix conflicting types error with net_device.
  staging: rtl8723bs: Remove unused variable pwdev_priv
  staging: vc04_services: Update testing instructions
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.11-rc1.

  Nothing earth-shattering in here, just constant forward progress in
  adding support for new hardware and better debugging functionalities
  for thunderbolt devices and the subsystem. Included in here are:

   - thunderbolt debugging update and driver additions

   - xhci driver updates

   - typec driver updates

   - kselftest device driver changes (acked by the relevant maintainers,
     depended on other changes in this tree.)

   - cdns3 driver updates

   - gadget driver updates

   - MODULE_DESCRIPTION() additions

   - dwc3 driver updates and fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (112 commits)
  kselftest: devices: Add test to detect device error logs
  kselftest: Move ksft helper module to common directory
  kselftest: devices: Move discoverable devices test to subdirectory
  usb: gadget: f_uac2: fix non-newline-terminated function name
  USB: uas: Implement the new shutdown callback
  USB: core: add 'shutdown' callback to usb_driver
  usb: typec: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  usb: dwc3: enable CCI support for AMD-xilinx DWC3 controller
  usb: dwc2: add support for other Lantiq SoCs
  usb: gadget: Use u16 types for 16-bit fields
  usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup
  usb: dwc3: core: Check all ports when set phy suspend
  usb: typec: tcpci: add support to set connector orientation
  dt-bindings: usb: Convert fsl-usb to yaml
  usb: typec: ucsi: reorder operations in ucsi_run_command()
  usb: typec: ucsi: extract common code for command handling
  usb: typec: ucsi: inline ucsi_read_message_in
  usb: typec: ucsi: rework command execution functions
  usb: typec: ucsi: split read operation
  usb: typec: ucsi: simplify command sending API
  ...

Pull tty / serial updates from Greg KH:
 "Here is a small set of tty and serial driver updates for 6.11-rc1. Not
  much happened this cycle, unlike the previous kernel release which had
  lots of "excitement" in this part of the kernel. Included in here are
  the following changes:

   - dt binding updates for new platforms

   - 8250 driver updates

   - various small serial driver fixes and updates

   - printk/console naming and matching attempt #2 (was reverted for
     6.10-final, should be good to go this time around, acked by the
     relevant maintainers).

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (22 commits)
  Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports
  serial: core: Add serial_base_match_and_update_preferred_console()
  printk: Add match_devname_and_update_preferred_console()
  serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  dt-bindings: serial: sc16is7xx: add reset-gpios
  dt-bindings: serial: vt8500-uart: convert to json-schema
  serial: 8250_platform: Explicitly show we initialise ISA ports only once
  tty: add missing MODULE_DESCRIPTION() macros
  dt-bindings: serial: mediatek,uart: add MT7988
  serial: sh-sci: Add support for RZ/V2H(P) SoC
  dt-bindings: serial: Add documentation for Renesas RZ/V2H(P) (R9A09G057) SCIF support
  dt-bindings: serial: renesas,scif: Make 'interrupt-names' property as required
  dt-bindings: serial: renesas,scif: Validate 'interrupts' and 'interrupt-names'
  dt-bindings: serial: renesas,scif: Move ref for serial.yaml at the end
  riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uarts
  serial: 8250_dw: Use reset array API to get resets
  dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC
  serial: 8250: Extract platform driver
  serial: 8250: Extract RSA bits
  serial: imx: stop casting struct uart_port to struct imx_port
  ...

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter.

  Notably this includes fixes for a s390 build breakage.

  Current release - new code bugs:

   - eth: fbnic: fix s390 build

   - eth: airoha: fix NULL pointer dereference in
     airoha_qdma_cleanup_rx_queue()

  Previous releases - regressions:

   - flow_dissector: use DEBUG_NET_WARN_ON_ONCE

   - ipv4: fix incorrect TOS in route get reply

   - dsa: fix chip-wide frame size config in some drivers

  Previous releases - always broken:

   - netfilter: nf_set_pipapo: fix initial map fill

   - eth: gve: fix XDP TX completion handling when counters overflow"

* tag 'net-6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
  eth: fbnic: don't build the driver when skb has more than 21 frags
  net: dsa: b53: Limit chip-wide jumbo frame config to CPU ports
  net: dsa: mv88e6xxx: Limit chip-wide frame size config to CPU ports
  net...

Pull btrfs fix from David Sterba:
 "A fix for build breakage on 32bit platforms"

* tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: change BTRFS_MOUNT_* flags to 64bit type

Merge tag 'probes-fixes-v6.11-pre-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull uprobe fix from Masami Hiramatsu:

 - Add sys_uretprobe entry to scripts/syscall.tbl.

* tag 'probes-fixes-v6.11-pre-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  syscalls: Fix to add sys_uretprobe to syscall.tbl

Pull power sequencing fixes from Bartosz Golaszewski:
 "There's one fix for an invalid pointer dereference in error path
  reported by smatch and two patches that address the noisy config
  choices you reported earlier this week.

  Summary:

   - fix an invalid pointer dereference in error path in pwrseq core

   - reduce the Kconfig noise from PCI pwrctl choices"

* tag 'pwrseq-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  arm64: qcom: don't select HAVE_PWRCTL when PCI=n
  Kconfig: reduce the amount of power sequencing noise
  power: sequencing: fix an invalid pointer dereference in error path

Pull sound updates from Takashi Iwai:
 "Lots of changes in this cycle, but mostly for cleanups and
  refactoring.

  Significant amount of changes are about DT schema conversions for ASoC
  at this time while we see other usual suspects, too.

  Some highlights below:

  Core:
   - Re-introduction of PCM sync ID support API
   - MIDI2 time-base extension in ALSA sequencer API

  ASoC:
   - Syncing of features between simple-audio-card and the two
     audio-graph cards
   - Support for specifying the order of operations for components
     within cards to allow quirking for unusual systems
   - Lots of DT schema conversions
   - Continued SOF/Intel updates for topology, SoundWire, IPC3/4
   - New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
     Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
     and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
     PCM5242

  HD-audio:
 ...