Forum | Documentation | Website | Blog

Skip to content
Snippets Groups Projects
Commit d265bd7c authored by Harry Liebel's avatar Harry Liebel Committed by Dan Handley
Browse files

Add Firmware Image Package (FIP) documentation 

This fixes ARM-software/tf-issues#9

Change-Id: Id57037115b8762efc9eaf5ff41887b71d6494c5d
parent 561cd33e
Branches
Tags
No related merge requests found
Hide whitespace changes
Inline Side-by-side
docs/porting-guide.md
+ 101
− 15
View file @ d265bd7c
......@@ -13,7 +13,8 @@ Contents
* Boot Loader stage 2 (BL2)
* Boot Loader stage 3-1 (BL3-1)
* PSCI implementation (in BL3-1)
4. C Library
4. C Library
5. Storage abstraction layer
- - - - - - - - - - - - - - - - - -
......@@ -105,7 +106,17 @@ constants defined. In the ARM FVP port, this file is found in
* **#define : BL2_IMAGE_NAME**
Name of the BL2 binary image on the host file-system. This name is used by
BL1 to load BL2 into secure memory using semi-hosting.
BL1 to load BL2 into secure memory from non-volatile storage.
* **#define : BL31_IMAGE_NAME**
Name of the BL3-1 binary image on the host file-system. This name is used by
BL2 to load BL3-1 into secure memory from platform storage.
* **#define : BL33_IMAGE_NAME**
Name of the BL3-3 binary image on the host file-system. This name is used by
BL2 to load BL3-3 into non-secure memory from platform storage.
* **#define : PLATFORM_CACHE_LINE_SIZE**
......@@ -172,6 +183,10 @@ constants defined. In the ARM FVP port, this file is found in
Defines the base address in secure RAM where BL2 loads the BL3-1 binary
image. Must be aligned on a page-size boundary.
* **#define : NS_IMAGE_OFFSET**
Defines the base address in non-secure DRAM where BL2 loads the BL3-3 binary
image. Must be aligned on a page-size boundary.
### Other mandatory modifications
......@@ -325,7 +340,7 @@ warm boot. For each CPU, BL1 is responsible for the following tasks:
specific address in the BL3-1 image in the same processor mode as it was
when released from reset.
5. Loading the BL2 image in secure memory using semi-hosting at the
5. Loading the BL2 image from non-volatile storage into secure memory at the
address specified by the platform defined constant `BL2_BASE`.
6. Populating a `meminfo` structure with the following information in memory,
......@@ -434,6 +449,9 @@ MMU and data cache have been enabled.
In the ARM FVP port, it zeros out the ZI section, enables the system level
implementation of the generic timer counter and initializes the console.
This function is also responsible for initializing the storage abstraction layer
which is used to load further bootloader images.
This function helps fulfill requirement 5 above.
......@@ -485,16 +503,17 @@ The BL2 stage is executed only by the primary CPU, which is determined in BL1
using the `platform_is_primary_cpu()` function. BL1 passed control to BL2 at
`BL2_BASE`. BL2 executes in Secure EL1 and is responsible for:
1. Loading the BL3-1 binary image in secure RAM using semi-hosting. To load the
BL3-1 image, BL2 makes use of the `meminfo` structure passed to it by BL1.
This structure allows BL2 to calculate how much secure RAM is available for
its use. The platform also defines the address in secure RAM where BL3-1 is
loaded through the constant `BL31_BASE`. BL2 uses this information to
determine if there is enough memory to load the BL3-1 image.
1. Loading the BL3-1 binary image into secure RAM from non-volatile storage. To
load the BL3-1 image, BL2 makes use of the `meminfo` structure passed to it
by BL1. This structure allows BL2 to calculate how much secure RAM is
available for its use. The platform also defines the address in secure RAM
where BL3-1 is loaded through the constant `BL31_BASE`. BL2 uses this
information to determine if there is enough memory to load the BL3-1 image.
2. Arranging to pass control to a normal world BL image that has been
pre-loaded at a platform-specific address. This address is determined using
the `plat_get_ns_image_entrypoint()` function described below.
2. Loading the normal world BL3-3 binary image into non-secure DRAM from
platform storage and arranging for BL3-1 to pass control to this image. This
address is determined using the `plat_get_ns_image_entrypoint()` function
described below.
BL2 populates an `el_change_info` structure in memory provided by the
platform with information about how BL3-1 should pass control to the normal
......@@ -535,7 +554,9 @@ by the primary CPU. The arguments to this function are:
The platform must copy the contents of the `meminfo` structure into a private
variable as the original memory may be subsequently overwritten by BL2. The
copied structure is made available to all BL2 code through the
`bl2_plat_sec_mem_layout()` function.
`bl2_plat_sec_mem_layout()` function. The non-secure memory extents used for
loading BL3-3 is also initialized in this function. Access to this information
is provided by the `bl2_get_ns_mem_layout()` function.
### Function : bl2_plat_arch_setup() [mandatory]
......@@ -570,6 +591,9 @@ accesses it in `bl2_main()`.
The ARM FVP port initializes this pointer to the base address of Secure DRAM
(`0x06000000`).
This function is also responsible for initializing the storage abstraction layer
which is used to load further bootloader images.
### Variable : unsigned char bl2_el_change_mem_ptr[EL_CHANGE_MEM_SIZE] [mandatory]
......@@ -592,6 +616,20 @@ populated with the extents of secure RAM available for BL2 to use. See
`bl2_early_platform_setup()` above.
### Function : bl2_get_ns_mem_layout() [mandatory]
Argument : void
Return : meminfo *
This function should only be called on the cold boot path. It may execute with
the MMU and data caches enabled if the platform port does the necessary
initialization in `bl2_plat_arch_setup()`. It is only called by the primary CPU.
The purpose of this function is to return a pointer to a `meminfo` structure
populated with the extents of non-secure DRAM available for BL2 to use. See
`bl2_early_platform_setup()` above.
### Function : init_bl31_mem_layout() [optional]
Argument : meminfo *, meminfo *, unsigned int
......@@ -620,8 +658,7 @@ As previously described, BL2 is responsible for arranging for control to be
passed to a normal world BL image through BL3-1. This function returns the
entrypoint of that image, which BL3-1 uses to jump to it.
The ARM FVP port assumes that flash memory has been pre-loaded with the UEFI
image, and so returns the base address of flash memory.
BL2 is responsible for loading the normal world BL3-3 image (e.g. UEFI).
3.2 Boot Loader Stage 3-1 (BL3-1)
......@@ -981,6 +1018,55 @@ A copy of the [FreeBSD] sources can be downloaded with `git`.
git clone git://github.com/freebsd/freebsd.git -b origin/release/9.2.0
5. Storage abstraction layer
-----------------------------
In order to improve platform independence and portability an storage abstraction
layer is used to load data from non-volatile platform storage.
Each platform should register devices and their drivers via the Storage layer.
These drivers then need to be initialized by bootloader phases as
required in their respective `blx_platform_setup()` functions. Currently
storage access is only required by BL1 and BL2 phases. The `load_image()`
function uses the storage layer to access non-volatile platform storage.
It is mandatory to implement at least one storage driver. For the FVP the
Firmware Image Package(FIP) driver is provided as the default means to load data
from storage (see the "Firmware Image Package" section in the [User Guide]).
The storage layer is described in the header file `include/io_storage.h`. The
implementation of the common library is in `lib/io_storage.c` and the driver
files are located in `drivers/io/`.
Each IO driver must provide `io_dev_*` structures, as described in
`drivers/io/io_driver.h`. These are returned via a mandatory registration
function that is called on platform initialization. The semi-hosting driver
implementation in `io_semihosting.c` can be used as an example.
The Storage layer provides mechanisms to initialize storage devices before
IO operations are called. The basic operations supported by the layer
include `open()`, `close()`, `read()`, `write()`, `size()` and `seek()`.
Drivers do not have to implement all operations, but each platform must
provide at least one driver for a device capable of supporting generic
operations such as loading a bootloader image.
The current implementation only allows for known images to be loaded by the
firmware. These images are specified by using their names, as defined in the
`platform.h` file. The platform layer (`plat_get_image_source()`) then returns
a reference to a device and a driver-specific `spec` which will be understood
by the driver to allow access to the image data.
The layer is designed in such a way that is it possible to chain drivers with
other drivers. For example, file-system drivers may be implemented on top of
physical block devices, both represented by IO devices with corresponding
drivers. In such a case, the file-system "binding" with the block device may
be deferred until the file-system device is initialised.
The abstraction currently depends on structures being statically allocated
by the drivers and callers, as the system does not yet provide a means of
dynamically allocating memory. This may also have the affect of limiting the
amount of open resources per driver.
- - - - - - - - - - - - - - - - - - - - - - - - - -
_Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved._
......
docs/user-guide.md
+ 203
− 46
View file @ d265bd7c
......@@ -50,7 +50,8 @@ The following tools are required to use the ARM Trusted Firmware:
* `ia32-libs` package
* `build-essential` and `uuid-dev` packages for building UEFI
* `build-essential` and `uuid-dev` packages for building UEFI and the Firmware
Image Package(FIP) tool
* `bc` and `ncurses-dev` packages for building Linux
......@@ -80,12 +81,14 @@ To build the software for the FVPs, follow these steps:
cd arm-trusted-firmware
3. Set the compiler path and build:
3. Set the compiler path, specify a Normal World (BL3-3) image and build:
CROSS_COMPILE=<path-to-aarch64-gcc>/bin/aarch64-none-elf- make PLAT=fvp
CROSS_COMPILE=<path-to-aarch64-gcc>/bin/aarch64-none-elf- BL33=<path-to-bl33> make PLAT=fvp
By default this produces a release version of the build. To produce a debug
version instead, refer to the "Debugging options" section below.
version instead, refer to the "Debugging options" section below. UEFI can be
used as the BL3-3 image, refer to the "Obtaining the normal world software"
section below.
The build process creates products in a `build` directory tree, building
the objects and binaries for each boot loader stage in separate
......@@ -97,10 +100,17 @@ To build the software for the FVPs, follow these steps:
* `build/<platform>/<build-type>/bl31.bin`
... where `<platform>` currently defaults to `fvp` and `<build-type>` is
either `debug` or `release`.
either `debug` or `release`. A Firmare Image Package(FIP) will be created as
part of the build. It contains all boot loader images except for `bl1.bin`.
4. Copy the three boot loader binary files to the directory from which the FVP
will be launched. Symbolic links of the same names may be created instead.
* `build/<platform>/<build-type>/fip.bin`
For more information on the `fip.bin` image see the "Firmware Image Package"
section below
4. Copy the `bl1.bin` and `fip.bin` binary files to the directory from which
the FVP will be launched. Symbolic links of the same names may be created
instead.
5. (Optional) Build products for a specific build variant can be removed using:
......@@ -168,6 +178,8 @@ is set to 'origin/master'.
#### Obtaining UEFI
TODO: Update UEFI GitHub hash.
Clone the [EDK2 (EFI Development Kit 2) source code][EDK2] from Github. This
version supports the Base and Foundation FVPs. EDK2 is an open source
implementation of the UEFI specification:
......@@ -186,20 +198,19 @@ these steps:
2. Copy build config templates to local workspace
export EDK_TOOLS_PATH=$(pwd)/BaseTools
. edksetup.sh $(pwd)/BaseTools/
. edksetup.sh
3. Rebuild EDK2 host tools
make -C "$EDK_TOOLS_PATH" clean
make -C "$EDK_TOOLS_PATH"
make -C BaseTools clean
make -C BaseTools
4. Build the software
CROSS_COMPILE=<absolute-path-to-aarch64-gcc>/bin/aarch64-none-elf- \
build -v -d3 -a AARCH64 -t ARMGCC \
-p ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.dsc \
-D ARM_FOUNDATION_FVP=1
make -f ArmPlatformPkg/Scripts/Makefile EDK2_ARCH=AARCH64 \
EDK2_DSC=ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.dsc \
EDK2_TOOLCHAIN=ARMGCC EDK2_MACROS="-n 6 -D ARM_FOUNDATION_FVP=1"
The EDK2 binary for use with the ARM Trusted Firmware can then be found
here:
......@@ -219,10 +230,14 @@ location. To do this, build the software as described above with the
-D ARM_FVP_LEGACY_GICV2_LOCATION=1
Then `make clean` before rebuilding EDK2.
Then clean the source tree before rebuilding EDK2:
make -f ArmPlatformPkg/Scripts/Makefile EDK2_ARCH=AARCH64 \
EDK2_DSC=ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.dsc \
EDK2_TOOLCHAIN=ARMGCC clean
The EDK2 binary `FVP_AARCH64_EFI.fd` should be loaded into FVP FLASH0 via model
parameters as described in the "Running the Software" section below.
The EDK2 binary `FVP_AARCH64_EFI.fd` should be specified as `BL33` to the
Trusted Firmware Makefile. See the "Building the Trusted Firmware" section.
#### Obtaining a Linux kernel
......@@ -421,13 +436,17 @@ The following `Foundation_v8` parameters should be used to boot Linux with
NOTE: Using the `--block-device` parameter is not necessary if a Linux RAM-disk
file-system is used (see the "Obtaining a File-system" section above).
NOTE: The `--data="<path to FIP binary>"@0x8000000` parameter is used to load a
Firmware Image Package at the start of NOR FLASH0 (see the "Building the
Trusted Firmware" section above).
<path-to>/Foundation_v8 \
--cores=4 \
--no-secure-memory \
--visualization \
--gicv3 \
--data="<path to bl1.bin>"@0x0 \
--data="<path to UEFI binary>"@0x8000000 \
--data="<path to FIP binary>"@0x8000000 \
--block-device="<path-to>/vexpress64-openembedded_lamp-armv8_20130927-7.img"
The default use-case for the Foundation FVP is to enable the GICv3 device in
......@@ -448,6 +467,10 @@ cache maintenance defects in the software.
NOTE: Using the `-C bp.virtioblockdevice.image_path` parameter is not necessary
if a Linux RAM-disk file-system is used (see the "Obtaining a root file-system"
section above).
NOTE: The `-C bp.flashloader0.fname` parameter is used to load a Firmware Image
Package at the start of NOR FLASH0 (see the "Building the Trusted Firmware"
section above).
<path-to>/FVP_Base_AEMv8A-AEMv8A \
......@@ -458,7 +481,7 @@ section above).
-C cache_state_modelled=1 \
-C bp.pl011_uart0.untimed_fifos=1 \
-C bp.secureflashloader.fname=<path to bl1.bin> \
-C bp.flashloader0.fname=<path to UEFI binary> \
-C bp.flashloader0.fname=<path to FIP binary> \
-C bp.virtioblockdevice.image_path="<path-to>/vexpress64-openembedded_lamp-armv8_20130927-7.img"
#### Running on the Cortex-A57-A53 Base FVP
......@@ -472,6 +495,10 @@ cache maintenance defects in the software.
NOTE: Using the `-C bp.virtioblockdevice.image_path` parameter is not necessary
if a Linux RAM-disk file-system is used (see the "Obtaining a root file-system"
section above).
NOTE: The `-C bp.flashloader0.fname` parameter is used to load a Firmware Image
Package at the start of NOR FLASH0 (see the "Building the Trusted Firmware"
section above).
<path-to>/FVP_Base_Cortex-A57x4-A53x4 \
......@@ -480,7 +507,7 @@ section above).
-C cache_state_modelled=1 \
-C bp.pl011_uart0.untimed_fifos=1 \
-C bp.secureflashloader.fname=<path to bl1.bin> \
-C bp.flashloader0.fname=<path to UEFI binary> \
-C bp.flashloader0.fname=<path to FIP binary> \
-C bp.virtioblockdevice.image_path="<path-to>/vexpress64-openembedded_lamp-armv8_20130927-7.img"
### Configuring the GICv2 memory map
......@@ -533,7 +560,7 @@ legacy VE memory map:
--visualization \
--no-gicv3 \
--data="<path to bl1.bin>"@0x0 \
--data="<path to UEFI binary>"@0x8000000 \
--data="<path to FIP binary>"@0x8000000 \
--block-device="<path-to>/vexpress64-openembedded_lamp-armv8_20130927-7.img"
Explicit configuration of the `SYS_ID` register is not required.
......@@ -723,11 +750,10 @@ BL1 execution continues as follows:
1. BL1 determines the amount of free trusted SRAM memory available by
calculating the extent of its own data section, which also resides in
trusted SRAM. BL1 loads a BL2 raw binary image through semi-hosting, at a
platform-specific base address. The filename of the BL2 raw binary image on
the host file system must be `bl2.bin`. If the BL2 image file is not present
or if there is not enough free trusted SRAM the following error message
is printed:
trusted SRAM. BL1 loads a BL2 raw binary image from platform storage, at a
platform-specific base address. The filename of the BL2 raw binary image
must be `bl2.bin`. If the BL2 image file is not present or if there is not
enough free trusted SRAM the following error message is printed:
"Failed to load boot loader stage 2 (BL2) firmware."
......@@ -777,31 +803,32 @@ the BL3-1 image.
#### Normal world image load
BL2 loads a rich boot firmware image (UEFI). The image executes in the normal
world. BL2 relies on BL3-1 to pass control to the normal world software image it
loads. Hence, BL2 populates a platform-specific area of memory with the
entrypoint and Current Program Status Register (`CPSR`) of the normal world
software image. The entrypoint is the load address of the normal world software
image. The `CPSR` is determined as specified in Section 5.13 of the [PSCI PDD]
[PSCI]. This information is passed to BL3-1.
BL2 loads the normal world firmware image (e.g. UEFI). BL2 relies on BL3-1 to
pass control to the normal world software image it loads. Hence, BL2 populates
a platform-specific area of memory with the entrypoint and Current Program
Status Register (`CPSR`) of the normal world software image. The entrypoint is
the load address of the normal world software image. The `CPSR` is determined as
specified in Section 5.13 of the [PSCI PDD] [PSCI]. This information is passed
to BL3-1.
##### UEFI firmware load
By default, BL2 assumes the UEFI image is present at the base of NOR flash0
(`0x08000000`), and arranges for BL3-1 to pass control to that location. As
mentioned earlier, BL2 populates platform-specific memory with the entrypoint
and `CPSR` of the UEFI image.
BL2 loads the BL3-3 (UEFI) image into non-secure memory as defined by the
platform (`0x88000000` for FVPs), and arranges for BL3-1 to pass control to that
location. As mentioned earlier, BL2 populates platform-specific memory with the
entrypoint and `CPSR` of the BL3-3 image.
#### BL3-1 image load and execution
BL2 execution continues as follows:
1. BL2 loads the BL3-1 image into a platform-specific address in trusted SRAM.
This is done using semi-hosting. The image is identified by the file
`bl31.bin` on the host file-system. If there is not enough memory to load
the image or the image is missing it leads to an assertion failure. If the
BL3-1 image loads successfully, BL1 updates the amount of trusted SRAM used
and available for use by BL3-1. This information is populated at a
1. BL2 loads the BL3-1 image into a platform-specific address in trusted SRAM
and the BL3-3 image into a platform specific address in non-secure DRAM.
The images are identified by the files `bl31.bin` and `bl33.bin` in
platform storage. If there is not enough memory to load the images or the
images are missing it leads to an assertion failure. If the BL3-1 image
loads successfully, BL1 updates the amount of trusted SRAM used and
available for use by BL3-1. This information is populated at a
platform-specific memory address.
2. BL2 passes control back to BL1 by raising an SMC, providing BL1 with the
......@@ -920,7 +947,7 @@ memory address populated by BL2.
### Normal world software execution
BL3-1 uses the entrypoint information provided by BL2 to jump to the normal
world software image at the highest available Exception Level (EL2 if
world software image (BL3-3) at the highest available Exception Level (EL2 if
available, otherwise EL1).
......@@ -954,7 +981,7 @@ and BL2. This memory layout is illustrated by the following diagram.
Each bootloader stage image layout is described by its own linker script. The
linker scripts export some symbols into the program symbol table. Their values
correspond to particular addresses. The trusted firwmare code can refer to these
correspond to particular addresses. The trusted firmware code can refer to these
symbols to figure out the image memory layout.
Linker symbols follow the following naming convention in the trusted firmware.
......@@ -998,7 +1025,7 @@ must be provided for each bootloader stage and some are specific to a given
bootloader stage.
The linker scripts define some extra, optional symbols. They are not actually
used by any code but they help in undertanding the bootloader images' memory
used by any code but they help in understanding the bootloader images' memory
layout as they are easy to spot in the link map files.
#### Common linker symbols
......@@ -1196,6 +1223,135 @@ following view:
------------ 0x04000000
### Firmware Image Package (FIP)
Using a Firmware Image Package (FIP) allows for packing bootloader images (and
potentially other payloads) into a single archive that can be loaded by the ARM
Trusted Firmware from non-volatile platform storage. A driver to load images
from a FIP has been added to the storage layer and allows a package to be read
from supported platform storage. A tool to create Firmware Image Packages is
also provided and described below.
#### Firmware Image Package layout
The FIP layout consists of a table of contents (ToC) followed by payload data.
The ToC itself has a header followed by one or more table entries. The ToC is
terminated by an end marker entry. All ToC entries describe some payload data
that has been appended to the end of the binary package. With the information
provided in the ToC entry the corresponding payload data can be retrieved.
------------------
| ToC Header |
|----------------|
| ToC Entry 0 |
|----------------|
| ToC Entry 1 |
|----------------|
| ToC End Marker |
|----------------|
| |
| Data 0 |
| |
|----------------|
| |
| Data 1 |
| |
------------------
The ToC header and entry formats are described in the header file
`include/firmware_image_package.h`. This file is used by both the tool and the
ARM Trusted firmware.
The ToC header has the following fields:
`name`: The name of the ToC. This is currently used to validate the header.
`serial_number`: A non-zero number provided by the creation tool
`flags`: Flags associated with this data. None are yet defined.
A ToC entry has the following fields:
`uuid`: All files are referred to by a pre-defined Universally Unique
IDentifier [UUID] . The UUIDs are defined in
`include/firmware_image_package`. The platform translates the requested
image name into the corresponding UUID when accessing the package.
`offset_address`: The offset address at which the corresponding payload data
can be found. The offset is calculated from the ToC base address.
`size`: The size of the corresponding payload data in bytes.
`flags`: Flags associated with this entry. Non are yet defined.
#### Creating a Firmware Image Package
The FIP creation tool can be used to pack specified images into a binary package
that can be loaded by the ARM Trusted Firmware from platform storage. The tool
currently only supports packing bootloader images. Additional image definitions
can be added to the tool as required.
The tool can be found in `tools/fip_create`. Instructions on how to build and
use the tool follow.
Build the tool:
make -C tools/fip_create
It is recommended to remove the build artifacts before rebuilding:
make -C tools/fip_create clean
Create a Firmware package that contains existing FVP BL2 and BL3-1 images:
# fip_create --help to print usage information
# fip_create <fip_name> <images to add> [--dump to show result]
./tools/fip_create/fip_create fip.bin --dump \
--bl2 build/fvp/debug/bl2.bin --bl31 build/fvp/debug/bl31.bin
Firmware Image Package ToC:
---------------------------
- Trusted Boot Firmware BL2: offset=0x88, size=0x81E8
file: 'build/fvp/debug/bl2.bin'
- EL3 Runtime Firmware BL3-1: offset=0x8270, size=0xC218
file: 'build/fvp/debug/bl31.bin'
---------------------------
Creating "fip.bin"
View the contents of an existing Firmware package:
./tools/fip_create/fip_create fip.bin --dump
Firmware Image Package ToC:
---------------------------
- Trusted Boot Firmware BL2: offset=0x88, size=0x81E8
- EL3 Runtime Firmware BL3-1: offset=0x8270, size=0xC218
---------------------------
Existing package entries can be individially updated:
# Change the BL2 from Debug to Release version
./tools/fip_create/fip_create fip.bin --dump \
--bl2 build/fvp/release/bl2.bin
Firmware Image Package ToC:
---------------------------
- Trusted Boot Firmware BL2: offset=0x88, size=0x7240
file: 'build/fvp/release/bl2.bin'
- EL3 Runtime Firmware BL3-1: offset=0x72C8, size=0xC218
---------------------------
Updating "fip.bin"
#### Loading from a Firmware Image Package (FIP)
The Firmware Image Package (FIP) driver can load images from a binary package on
non-volatile platform storage. For the FVPs this currently NOR FLASH. For
information on how to load a FIP into FVP NOR FLASH see the "Running the
software" section.
Bootloader images are loaded according to the platform policy as specified in
`plat/<platform>/plat_io_storage.c`. For the FVPs this means the platform will
attempt to load images from a Firmware Image Package located at the start of NOR
FLASH0.
Currently the FVPs policy only allows for loading of known images. The platform
policy can be modified to add additional images.
### Code Structure
Trusted Firmware code is logically divided between the three boot loader
......@@ -1256,3 +1412,4 @@ _Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved._
[DS-5]: http://www.arm.com/products/tools/software-tools/ds-5/index.php
[PSCI]: http://infocenter.arm.com/help/topic/com.arm.doc.den0022b/index.html "Power State Coordination Interface PDD (ARM DEN 0022B.b)"
[SMCCC]: http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html "SMC Calling Convention PDD (ARM DEN 0028A)"
[UUID]: https://tools.ietf.org/rfc/rfc4122.txt "A Universally Unique IDentifier (UUID) URN Namespace"
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment

Open hardware computers for makers, educators and professionals