- Apr 07, 2021
-
-
Andrea.Ho authored
Advantech sw_button is a ACPI event trigger button. With this driver, we can report KEY_PROG1 on the Advantech Tabletop Network Appliances products and it has been tested in FWA1112VC. Add the software define button support to report EV_REP key_event (KEY_PROG1) by pressing button that could be get on user interface and trigger the customized actions. Signed-off-by:
Andrea.Ho <Andrea.Ho@advantech.com.tw> Link: https://lore.kernel.org/r/20210319034427.23222-1-andrea.cs97g@nctu.edu.tw Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
- Apr 06, 2021
-
-
Hans de Goede authored
Some devices send (duplicate) tablet-mode events when moved around even though the mode has not changed; and they do this even when suspended. Change the tablet-mode event handling when priv->wakeup_mode is set to update the switch state in case it changed and then return immediately (without calling pm_wakeup_hard_event()) to avoid spurious wakeups. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212537 Fixes: 537b0dd4 ("platform/x86: intel-hid: Add support for SW_TABLET_MODE") Signed-off-by:
Elia Devito <eliadevito@gmail.com> Link: https://lore.kernel.org/r/20210404143831.25173-1-hdegoede@redhat.com
-
- Mar 23, 2021
-
-
David E. Box authored
Due to a HW limitation, the Latency Tolerance Reporting (LTR) value programmed in the Tiger Lake GBE controller is not large enough to allow the platform to enter Package C10, which in turn prevents the platform from achieving its low power target during suspend-to-idle. Ignore the GBE LTR value on Tiger Lake. LTR ignore functionality is currently performed solely by a debugfs write call. Split out the LTR code into its own function that can be called by both the debugfs writer and by this work around. Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Reviewed-by:
Sasha Neftin <sasha.neftin@intel.com> Cc: intel-wired-lan@lists.osuosl.org Reviewed-by:
Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20210319201844.3305399-2-david.e.box@linux.intel.com Signed-off-by:
-
David E. Box authored
The intel_pmc_core driver is mostly used as a debugging driver for Intel platforms that support SLPS0 (S0ix). But the driver may also be used to communicate actions to the PMC in order to ensure transition to SLPS0 on some systems and architectures. As such the driver should be built on all platforms it supports. Indicate this in the Kconfig. Also update the list of supported features. Signed-off-by:
Mario Limonciello <mario.limonciello@dell.com> Link: https://lore.kernel.org/r/20210319201844.3305399-1-david.e.box@linux.intel.com Signed-off-by:
-
Esteve Varela Colominas authored
Signed-off-by:
Esteve Varela Colominas <esteve.varela@gmail.com> Link: https://lore.kernel.org/r/20210321183512.14551-1-esteve.varela@gmail.com Signed-off-by:
-
kernel test robot authored
drivers/platform/surface/surface_dtx.c:651:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 1d609992 ("platform/surface: Add DTX driver") CC: Maximilian Luz <luzmaximilian@gmail.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20210319051919.GA39801@ae4f36e4f012 Signed-off-by:
-
kernel test robot authored
Use kobj_to_dev() instead of container_of() Generated by: scripts/coccinelle/api/kobj_to_dev.cocci CC: Denis Efremov <efremov@linux.com> Reported-by:
Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2103171258010.2981@hadrien Signed-off-by:
-
Bhaskar Chowdhury authored
s/progamming/programming/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210317095650.2036419-1-unixbhaskar@gmail.com Signed-off-by:
-
Bhaskar Chowdhury authored
s/derefence/dereference/ Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@cascardo.eti.br> Acked-by:
-
David E. Box authored
Fixes off-by-one bugs in the macro assignments for the crashlog control bits. Was initially tested on emulation but bug revealed after testing on silicon. Fixes: 5ef9998c ("platform/x86: Intel PMT Crashlog capability driver") Signed-off-by:
-
David E. Box authored
Initialize the struct resource in intel_pmt_dev_register to zero to avoid a fault should the char *name field be non-zero. Signed-off-by:
-
- Mar 21, 2021
-
-
Nitin Joshi authored
On some newer Thinkpads we need to set SAR value based on antenna type. This patch provides a sysfs interface that userspace can use to get antenna type and set corresponding SAR value, as is required for FCC certification. Reviewed-by:
Mark Pearson <markpearson@lenovo.com> Signed-off-by:
Nitin Joshi <njoshi1@lenovo.com> Link: https://lore.kernel.org/r/20210317024636.356175-1-njoshi1@lenovo.com Signed-off-by:
-
Hans de Goede authored
Stop reporting SW_DOCK events because this breaks suspend-on-lid-close. SW_DOCK should only be reported for docking stations, but all the DSDTs in my DSDT collection which use the intel-vbtn code, always seem to use this for 2-in-1s / convertibles and set SW_DOCK=1 when in laptop-mode (in tandem with setting SW_TABLET_MODE=0). This causes userspace to think the laptop is docked to a port-replicator and to disable suspend-on-lid-close, which is undesirable. Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting. Note this may theoretically cause us to stop reporting SW_DOCK on some device where the 0xCA and 0xCB intel-vbtn events are actually used for reporting docking to a classic docking-station / port-replicator but I'm not aware of any such devices. Also the most important thing is that we only report SW_DOCK when it reliably reports being docked to a classic docking-station without any false positives, which clearly is not the case here. If there is a chance of reporting false positives then it is better to not report SW_DOCK at all. Cc: stable@vger.kernel.org Signed-off-by:
-
Hans de Goede authored
Cleanup create_attributes_level_sysfs_files(): 1. There is no need to call sysfs_remove_file() on error, sysman_init() will already call release_attributes_data() on failure which already does this. 2. There is no need for the pr_debug() calls sysfs_create_file() should never fail and if it does it will already complain about the problem itself. Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by:
-
Hans de Goede authored
When either the attributes or the password interface is not found, then unregister the 2 wmi drivers again and return -ENODEV from sysman_init(). Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Reported-by:
Alexander Naumann <alexandernaumann@gmx.de> Signed-off-by:
-
Hans de Goede authored
Cleanup sysman_init() error-exit handling: 1. There is no need for the fail_reset_bios and fail_authentication_kset eror-exit cases, these can be handled by release_attributes_data() 2. Rename all the labels from fail_what_failed, to err_what_to_cleanup this is the usual way to name these and avoids the need to rename them when extra steps are added. Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by:
-
Hans de Goede authored
platform/x86: dell-wmi-sysman: Fix release_attributes_data() getting called twice on init_bios_attributes() failure All calls of init_bios_attributes() will result in a goto fail_create_group if they fail, which calls release_attributes_data(). So there is no need to call release_attributes_data() from init_bios_attributes() on failure itself. Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by:
-
Hans de Goede authored
During some of the error-exit paths it is possible that release_attributes_data() will get called multiple times, which results in exit_foo_attributes() getting called multiple times. Make it safe to call exit_foo_attributes() multiple times, avoiding double-free()s in this case. Note that release_attributes_data() really should only be called once during error-exit paths. This will be fixed in a separate patch and it is good to have the exit_foo_attributes() functions modified this way regardless. Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by:
-
Hans de Goede authored
It is possible for release_attributes_data() to get called when the main_dir_kset has not been created yet, move the removal of the bios-reset sysfs attr to under a if (main_dir_kset) check to avoid a NULL pointer deref. Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Reported-by:
-
Hans de Goede authored
On some system the WMI GUIDs used by dell-wmi-sysman are present but there are no enum type attributes, this causes init_bios_attributes() to return -ENODEV, after which sysman_init() does a "goto fail_create_group" and then calls release_attributes_data(). release_attributes_data() calls kset_unregister(wmi_priv.main_dir_kset); but before this commit it was missing a "wmi_priv.main_dir_kset = NULL;" statement; and after calling release_attributes_data() the sysman_init() error handling does this: if (wmi_priv.main_dir_kset) { kset_unregister(wmi_priv.main_dir_kset); wmi_priv.main_dir_kset = NULL; } Which causes a second kset_unregister(wmi_priv.main_dir_kset), leading to a double-free, which causes a crash. Add the missing "wmi_priv.main_dir_kset = NULL;" statement to release_attributes_data() to fix this double-free crash. Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: -
Hans de Goede authored
Testing has shown that setting /sys/firmware/acpi/platform_profile to "balanced" when /sys/bus/platform/devices/thinkpad_acpi/dytc_lapmode reports 1, causes dytc_lapmode to get reset to 0 and then it becomes stuck at 0 for aprox. 30 minutes even if the laptop is used on a lap. Disabling CQL (when enabled) before issuing the DYTC_CMD_RESET to get back to balanced mode and re-enabling it afterwards again, like the code already does when switching to low-power / performance mode fixes this. Fixes: c3bfcd4c ("platform/x86: thinkpad_acpi: Add platform profile support") Tested-by:
-
Esteve Varela Colominas authored
On many recent ThinkPad laptops, there's a new LED next to the ESC key, that indicates the FnLock status. When the Fn+ESC combo is pressed, FnLock is toggled, which causes the Media Key functionality to change, making it so that the media keys either perform their media key function, or function as an F-key by default. The Fn key can be used the access the alternate function at any time. With the current linux kernel, the LED doens't change state if you press the Fn+ESC key combo. However, the media key functionality *does* change. This is annoying, since the LED will stay on if it was on during bootup, and it makes it hard to keep track what the current state of the FnLock is. This patch calls an ACPI function, that gets the current media key state, when the Fn+ESC key combo is pressed. Through testing it was discovered that this function causes the LED to update correctly to reflect the current state when this function is called. The relevant ACPI calls are the following: \_SB_.PCI0.LPC0.EC0_.HKEY.GMKS: Get media key state, returns 0x603 if the FnLock mode is enabled, and 0x602 if it's disabled. \_SB_.PCI0.LPC0.EC0_.HKEY.SMKS: Set media key state, sending a 1 will enable FnLock mode, and a 0 will disable it. Relevant discussion: https://bugzilla.kernel.org/show_bug.cgi?id=207841 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1881015 Signed-off-by:
-
- Mar 18, 2021
-
-
Mark Pearson authored
Lenovo platforms with DYTC versions earlier than version 5 don't set the lapmode interface correctly, causing issues with thermald on older platforms. Add checking to only create the dytc_lapmode interface for version 5 and later. Fixes: 1ac09656 ("platform/x86: thinkpad_acpi: Add palm sensor support") Signed-off-by:
-
Hans de Goede authored
Immutable branch between MFD and Platform/x86 due for the v5.13 merge window
-
- Mar 17, 2021
-
-
Maximilian Luz authored
The Surface Pro 7+ is essentially a refresh of the Surface Pro 7 with updated hardware and a new WSID identifier. Signed-off-by:
-
Wei Yongjun authored
The sparse tool complains as follows: drivers/platform/surface/surface_aggregator_registry.c:355:30: warning: symbol 'ssam_base_hub_group' was not declared. Should it be static? This symbol is not used outside of surface_aggregator_registry.c, so this commit marks it static. Fixes: 797e7856 ("platform/surface: aggregator_registry: Add base device hub") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
-
Maximilian Luz authored
Add documentation for the user-space interface of the Surface DTX (detachment system) driver, used on Microsoft Surface Book series devices. Signed-off-by:
-
Maximilian Luz authored
Add support for native SSAM devices to the DTX driver. This allows support for the Surface Book 3, on which the DTX device is not present in ACPI. Signed-off-by:
-
Maximilian Luz authored
The Microsoft Surface Book series devices consist of a so-called clipboard part (containing the CPU, touchscreen, and primary battery) and a base part (containing keyboard, secondary battery, and optional discrete GPU). These parts can be separated, i.e. the clipboard can be detached and used as tablet. This detachment process is initiated by pressing a button. On the Surface Book 2 and 3 (targeted with this commit), the Surface Aggregator Module (i.e. the embedded controller on those devices) attempts to send a notification to any listening client driver and waits for further instructions (i.e. whether the detachment process should continue or be aborted). If it does not receive a response in a certain time-frame, the detachment process (by default) continues and the clipboard can be physically separated. In other words, (by default and) without a driver, the detachment process takes about 10 seconds to complete. This commit introduces a driver for this detachment syste...
-
- Mar 10, 2021
-
-
David E. Box authored
Adds PMT Telemetry aggregator support for the DG1 graphics PCIe card. The device does not have the DVSEC region in its PCI config space so hard code the discovery table data in the driver. Also requires a fix for DG1 in the Telemetry driver for how the ACCESS_TYPE field is used. Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
David E. Box authored
Some products will be available that have PMT capabilities that are not supported. Remove the warnings in this instance to avoid nuisance messages and confusion. Also return an error code for capabilities that are disabled by quirk to prevent them from keeping the driver loaded if only disabled capabilities are found. Fixes: 4f8217d5 ("mfd: Intel Platform Monitoring Technology support") Signed-off-by:
-
- Mar 08, 2021
-
-
Heikki Krogerus authored
The old device property API (device_add_properties()) is going to be removed. Replacing the it with the software node API equivalent, device_create_managed_software_node(). Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210304082023.17689-1-heikki.krogerus@linux.intel.com Signed-off-by:
-
Uwe Kleine-König authored
The driver core ignores the return value of struct bus_type::remove() (and so wmi_dev_remove()) because there is only little that can be done. To simplify the quest to make this function return void, let struct wmi_driver::remove() return void, too. All implementers of this callback return 0 already and this way it should be obvious to driver authors that returning an error code is a bad idea. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210301160404.1677064-1-u.kleine-koenig@pengutronix.de Signed-off-by:
-
Rafael J. Wysocki authored
A few x86 platform drivers use ACPI_DEBUG_PRINT() or ACPI_EXCEPTION() for printing messages, but that is questionable, because those macros belong to ACPICA and they should not be used elsewhere. In addition, ACPI_DEBUG_PRINT() requires special enabling to allow it to actually print the message, which is a nuisance, and the _COMPONENT symbol generally needed for that is not defined in any of the files in question. For this reason, replace the ACPI_DEBUG_PRINT() in lg-laptop.c with pr_debug() and the one in xo15-ebook.c with acpi_handle_debug() (with the additional benefit that the source object can be identified more easily after this change). Also drop the ACPI_MODULE_NAME() definitions that are only used by the ACPICA message printing macros from those files and from wmi.c and surfacepro3_button.c (while at it). Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/2074665.VPHYfYaQb6@kreacher [hdegoede@redhat.com: Drop acer-wmi.c chunk, a similar patch was already merged] Signed-off-by:
-
Alban Bedel authored
Like a few other system the Lenovo ThinkPad X1 Tablet Gen 2 miss the HEBC method, which prevent the power button from working. Add a quirk to enable the button array on this system family and fix the power button. Signed-off-by:
Alban Bedel <albeu@free.fr> Tested-by:
Alexander Kobel <a-kobel@a-kobel.de> Link: https://lore.kernel.org/r/20210222141559.3775-1-albeu@free.fr Signed-off-by:
-
Elia Devito authored
Implement support for cool, balanced and performance thermal profile Signed-off-by:
-
Elia Devito authored
rename "thermal policy" with the more appropriate term "thermal profile" Signed-off-by:
-
Petr Vaněk authored
uses by -> used by Signed-off-by:
Petr Vaněk <arkamar@atlas.cz> Reviewed-by:
Mark Gross <mgross@linux.intel.com> Link: https://lore.kernel.org/r/YCw6zavnfeHRGWgr@arkam Signed-off-by:
-
Hans de Goede authored
The "MELLANOX HARDWARE PLATFORM SUPPORT" is maintained as part of the pdx86 tree. But when Mark and I took over as new pdx86 maintainers the "MELLANOX HARDWARE PLATFORM SUPPORT" MAINTAINERS entry was not updated. Update the entry now. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by:
-
Alexander Kobel authored
Those events occur when a keyboard cover is attached to a ThinkPad X1 Tablet series device. Typically, they are used to switch from normal to tablet mode in userspace; e.g., to offer touch keyboard choices when focus goes to a text box and no keyboard is attached, or to enable autorotation of the display according to the builtin orientation sensor. intel-vtbn already recognizes those events. To avoid sending duplicate events to userspace, they are simply ignored. Thus, this patch only avoids warnings about unknown and unhandled HKEYs 0x4012 and 0x4013. For more information about the background and potential improvements for different types of attachment options, such as the Pico cartridge dock module, see https://lore.kernel.org/platform-driver-x86/38cb8265-1e30-d547-9e12-b4ae290be737@a-kobel.de/ Signed-off-by:
-
