- Aug 30, 2022
-
-
Antoniu Miclaus authored
Fix the links to redirect to the correct forum subsection for the latest Analog Devices drivers added. Signed-off-by:
Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220824170913.13411-1-antoniu.miclaus@analog.com Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
wangjianli authored
Delete the redundant word 'in'. Signed-off-by:
wangjianli <wangjianli@cdjrlc.com> Link: https://lore.kernel.org/r/20220823140023.2567-1-wangjianli@cdjrlc.com Signed-off-by:
-
Dmitry Rokosov authored
Introduce devicetree binding json-schema for MSA311 tri-axial, low-g accelerometer driver. Signed-off-by:
Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220822175011.2886-5-ddrokosov@sberdevices.ru Signed-off-by:
-
Dmitry Rokosov authored
MSA311 is a tri-axial, low-g accelerometer with I2C digital output for sensitivity consumer applications. It has dynamic user-selectable full scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements with output data rates from 1Hz to 1000Hz. This driver supports following MSA311 features: - IIO interface - Different power modes: NORMAL and SUSPEND (using pm_runtime) - ODR (Output Data Rate) selection - Scale and samp_freq selection - IIO triggered buffer, IIO reg access - NEW_DATA interrupt + trigger Below features to be done: - Motion Events: ACTIVE, TAP, ORIENT, FREEFALL - Low Power mode Datasheet: https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf Signed-off-by:Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220822175011.2886-4-ddrokosov@sberdevices.ru Signed-off-by:
-
- Aug 28, 2022
-
-
Dmitry Rokosov authored
MEMSensing Microsystems (Suzhou, China) Co., Ltd. operates as a micro electromechanical system technology company which produces micro electromechanical system microphones and sensors. MEMSensing Microsystems (Suzhou, China) Co., Ltd. applies its products in consumer electronics, industrial control, medical electronics and automotive, and other fields. Signed-off-by:
-
Andy Shevchenko authored
Add str_read_write() helper to return 'read' or 'write' string literal. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Dmitry Rokosov authored
Remove duplicated definition of UHZ_PER_HZ, because it's available in the units.h as MICROHZ_PER_HZ. Signed-off-by:
-
Dmitry Rokosov authored
Remove duplicated definition of NHZ_PER_HZ, because it's available in the units.h as NANOHZ_PER_HZ. Signed-off-by:
-
Dmitry Rokosov authored
Currently, Hz units do not have milli, micro and nano Hz coefficients. Some drivers (IIO especially) use their analogues to calculate appropriate Hz values. This patch includes them to units.h definitions, so they can be used from different kernel places. Signed-off-by:
-
- Aug 20, 2022
-
-
Joe Simmons-Talbott authored
Prefer lines > 80 characters over splitting dereferences across multiple lines. Reported by checkpatch.pl. Signed-off-by:
Joe Simmons-Talbott <joetalbott@gmail.com> Link: https://lore.kernel.org/r/20220819182012.219523-1-joetalbott@gmail.com Signed-off-by:
-
William Breathitt Gray authored
The stx104 driver supports both ADC and DAC functionality. Signed-off-by:
William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/20220815222921.138945-1-william.gray@linaro.org Signed-off-by:
-
Jonathan Cameron authored
____cacheline_aligned is an insufficient guarantee for non-coherent DMA on platforms with 128 byte cachelines above L1. Switch to the updated IIO_DMA_MINALIGN definition. Whilst here, move the marking to cover the whole union. That has no functional affect, but makes it slightly easier to see what is going on. Signed-off-by:
-
- Aug 19, 2022
-
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by:
-
Krzysztof Kozlowski authored
Emails to Patrick Vasseur bounce ("Unknown To address"). Signed-off-by: -
Krzysztof Kozlowski authored
Emails to Tomislav Denis bounce ("550 5.1.1 User Unknown"). Signed-off-by: -
Krzysztof Kozlowski authored
Emails to Tomislav Denis bounce ("550 5.1.1 User Unknown"). Signed-off-by: -
Robert Marko authored
Add support for ADC5_VREF_VADC channel to rev2 ADC5 channel list. This channel measures the VADC reference LDO output. Signed-off-by:
Robert Marko <robimarko@gmail.com> Link: https://lore.kernel.org/r/20220818221815.346233-3-robimarko@gmail.com Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by:
-
Antoniu Miclaus authored
Remove extra step where the error code is assigned to the `ret` variable. Return instead error code directly. Signed-off-by:
-
- Aug 15, 2022
-
-
Andy Shevchenko authored
Both pressure and temperature are 24-bit long. Use proper accessors instead of overlapping readings. Signed-off-by:
-
Jakob Hauser authored
Add support for the magnetometer Yamaha YAS537. The additions are based on comparison of Yamaha Android kernel drivers for YAS532 [1] and YAS537 [2]. In the Yamaha YAS537 Android driver, there is an overflow/underflow control implemented. For regular usage, this seems not necessary. A similar overflow/ underflow control of Yamaha YAS530/532 Android driver isn't integrated in the mainline driver. It is therefore skipped for YAS537 in the mainline too. Also in the Yamaha YAS537 Android driver, at the end of the reset_yas537() function, a measurement is saved in "last_after_rcoil". Later on, this is compared to current measurements. If the difference gets too big, a new reset is initialized. The difference in measurements needs to be quite big, it's hard to say if this is necessary for regular operation. Therefore this isn't integrated in the mainline driver either. [1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c [2] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas537.c Signed-off-by:
Jakob Hauser <jahau@rocketmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/264c6488733a5c32089c9ab406a5bcb808c48fef.1660337264.git.jahau@rocketmail.com Signed-off-by:
-
Jakob Hauser authored
Add function pointers to the "chip_info" structure to ease the handling of different YAS variants. In the function yas5xx_probe(), the function call for "measure_offsets" was added as a conditional "if (ci->measure_offsets)". This is a preparatory step for YAS537, as this variant doesn't need an offset measurement. Signed-off-by:
-
Jakob Hauser authored
Add temperature calculation to the "chip_info" structure to ease the handling of different YAS variants. Signed-off-by:
-
Jakob Hauser authored
Add IIO scaling to the "chip_info" structure to ease the handling to different YAS variants. Signed-off-by:
-
Jakob Hauser authored
Add volatile registers to the "chip_info" structure to ease the handling of different YAS variants. Signed-off-by:
-
Jakob Hauser authored
Introduce the "chip_info" structure approach for better variant handling. The variant to be used is now chosen by the Device Tree (enum "chip_ids"), not by the chip ID in the register. However, there is a check to make sure they match (using integer "id_check"). Signed-off-by:
-
Jakob Hauser authored
This commit gathers several minor changes. In the device examples, "Xiaomi" is too generic, specific devices should be listed here. E.g. Xiaomi Redmi 2 seems to have YAS537 but it's not fully clear if this applies to all its variants. Samsung Galaxy S7 is often quoted in conjunction with YAS537. Removed defines for device IDs of YAS537 and YAS539, they are not needed so far. Signed-off-by:
-
Jakob Hauser authored
Use less stack by modifying %*ph parameters. While at it, in the function yas530_get_calibration_data(), the debug dump was extended to 16 elements as this is the size of the calibration data array of YAS530. Suggested-by:
-
Jakob Hauser authored
This is a preparation for adding the YAS537 variant. Functions that are used only by YAS530, YAS532 and YAS533 are renamed from yas5xx to yas530. Same for the registers. To avoid part listing in function and registers names, the name of the first variant is used. Where appropriate, comments were added that these functions are used by more than one variant. Functions that will be used by all variants including YAS537 remain in the naming scheme yas5xx. Or YAS5XX for registers, respectively. Signed-off-by:
-
Jakob Hauser authored
This is a preparation for adding YAS537 variant. YAS537 uses other data types on the calibration coefficients [1] than YAS530 [2] and YAS532 [3]. On YAS537, at least for a4 and a7 this could matter because 8-bit unsigned data from the register gets stored into a signed data type, therefore this should be 8-bit as well. For YAS530/532, on the other hand, it doesn't seem to matter. The size of a2-a9 and k is smaller than 8-bit at extraction, also the applied math is low. And Cx/Cy1/Cy2, now being defined as signed 16-bit, are extracted as unsigned 8-bit and undergo only minor math. [1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas537.c#L76-L78 [2] https://github.com/NovaFusion/android_kernel_samsung_golden/blob/cm-12.1/drivers/sensor/compass/yas_mag_driver-yas530.c#L526-L527 [3] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c#L76-L77 Signed-off-by:
-
