- Sep 16, 2011
-
-
Kalle Valo authored
It's not in staging anymore and I'm the current maintainer. Cc: Luis R. Rodriguez <mcgrof@gmail.com> Cc: Naveen Singh <nvesing@qca.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Felix Fietkau authored
With the new EDMA descriptor format, a single descriptor can contain up to four buffer pointers. By splitting the buffer into two parts, we can let the hardware add the padding internally instead of using memmove on the skb data. Signed-off-by:
-
Felix Fietkau authored
The only flag that needs to be set when ath_tx_rc_status is called with rc_update == false is the IEEE80211_TX_STAT_TX_FILTERED flag. All other data is ignored in that case. This flag can be set from ath_tx_complete_buf instead, so that we can drop a few redundant calls to ath_tx_rc_status and remove the rc_update function parameter Signed-off-by:
-
Felix Fietkau authored
ath_lookup_legacy now checks all the tx rate flags for MCS vs legacy Signed-off-by:
-
Felix Fietkau authored
ath_hw_cycle_counters_update only needs to be called if the power state changes. Most of the time this does not happen, even when ps_usecount goes down to 0. Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
-
Felix Fietkau authored
With the new API, tx descriptors can be written in one single pass instead of having to re-read and rewrite fields from multiple places. This makes the code easier to read and also slightly improves performance on embedded MIPS hardware. Signed-off-by:
-
Felix Fietkau authored
Instead of using lots of different functions with long argument lists, pull all the necessary information from one struct. This makes the code easier to read and eliminates the need for copying data between multiple linked descriptors. Signed-off-by:
-
Felix Fietkau authored
Reduces the number of accesses to uncached descriptor memory. Signed-off-by:
-
Felix Fietkau authored
This ensures that only ath9k_hw_set_desc_link needs to recalculate the tx descriptor checksum on AR9380+ Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
-
Felix Fietkau authored
Makes it easier to clean up the ath9k_hw descriptor API Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
-
Felix Fietkau authored
During a reset, rx buffers are flushed after rx has been disabled. To avoid race conditions, rx needs to stay disabled during the reset, so avoid any calls to ath9k_hw_rxena in that case. Signed-off-by:
-
Felix Fietkau authored
When starting the AP beacon timer, it assumes that the TSF has recently been cleared. Set the SC_OP_TSF_RESET flag to ensure that this is always the case. Signed-off-by:
-
Felix Fietkau authored
The interrupt handler increases the interrupt disable refcount, so the tasklet needs to always call ath9k_hw_enable_interrupts. Signed-off-by:
-
Mohammed Shafi Shajakhan authored
in ath_pci_resume it seems we are not enabling LED properly, in addition we have a PS wrapper fix for this Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
now the LED starts working for AR946/8x chipsets Cc: "Balasubramanian, senthilkumar" <senthilb@qca.qualcomm.com> Signed-off-by:
-
Rajkumar Manoharan authored
AR9003 seems to have issues sometimes with fast channel change in 5GHz and this case is handled specifically for AR9280 by doing a full reset. Let's do a full reset for 5GHz channles of AR9380 & for all channels of AR9280 pci chips. Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Senthil Balasubramanian authored
Move the register macros to appropriate header files to be in sync with other register definitions and also a single place to refer everything. Signed-off-by:
Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by:
-
Senthil Balasubramanian authored
This patch adds support for AR946/8x chipets. Signed-off-by:
-
Senthil Balasubramanian authored
Split tx/rx gain table initval hanlding part so readability is better and easy to manage the code. Signed-off-by:
-
Senthil Balasubramanian authored
Add initvals and register modifications required to support AR946/8x chipsets. Signed-off-by:
-
Eliad Peller authored
Add/fix some missing docs. Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
-
-
- Sep 14, 2011
-
-
Andres Salomon authored
Normally, the v9 firmware will be loaded if it's available. However, on OLPC XO-1 machines, the olpc-specific firmware supports extra functionality. This makes the libertas driver attempt to load the custom firmware first if the machine is an OLPC machine; if that fails (or it's not an OLPC machine), fall back to attempting to load the other firmwares. usb8388_olpc.bin is currently found in the linux-firmware repository. Signed-off-by:
Andres Salomon <dilinger@queued.net> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warning in net/cfg80211.h: Warning(include/net/cfg80211.h:1884): No description found for parameter 'registered' Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Helmut Schaa authored
Use rt2800_config_wcid and rt2800_delete_wcid_attr to initialize the WCID table instead of writing to the registers directly. Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Helmut Schaa authored
If a STA is not known by the hw (i.e. has no WCID assigned) don't allow aggregation since this might mess up tx status reports and we won't be able to distinguish the reports of multiple WCID-less STAs. Signed-off-by:
-
Helmut Schaa authored
This allows us to assign a WCID to each STA even for STAs without crypto key. To achieve this search for an unused WCID in the HW WCID table and assign it to the according STA. When configuring a pairwise key for this STA we don't need to write the MAC address and BSSIDX anymore but just update the crypto related fields in the WCID_ATTR table. This has two advantages: 1) Setting a new key for an already available STA (PTK rekeying) is slightly less expensive and should improve performance in situations where a lot of rekeying happens (e.g. a huge number of stations and/or a small rekeying interval) 2) The TXWI now gets a WCID assigned for unencrypted frames which will be reflected in the corresponding tx status report. This should make tx status reports in unencrypted AP mode more reliable as we can distinguish between multiple key-less STAs. Signed-off-by:
-
Helmut Schaa authored
When sending an unencrypted frame to a STA the driver might want to pass a suitable WCID since we don't have a key index to allow tx status reports to get properly assigned to the correct STA. Signed-off-by:
-
Helmut Schaa authored
When a WCID was already assigned to a STA the key configuration functions need to use the same WCID for configuring the keys. Hence, add the WCID to the crypo configuration structure. Signed-off-by:
-
Helmut Schaa authored
This implements a basic sta_add and sta_remove callback. Introduce a new structure rt2x00_sta and ask mac80211 to allocate it as private part of its ieee80211_sta. rt2x00_sta only contains the WCID for now. The sta_add callback allows the driver to assign a WCID to a station that is currently being added. The same wcid is also passed to the sta_remove callback one mac80211 removes this STA. Signed-off-by:
-
Helmut Schaa authored
This will be used by a later patch. No functional changes. Signed-off-by:
-
Shahar Levi authored
The hw.conf.channel value is not updated properly for drivers that support HW channel switch. Since the switch is done entirely by the driver and we don't call ieee80211_hw_config(), this value remains untouched. This patch fixes that by setting the new channel directly in ieee80211_chswitch_work(). Signed-off-by:
Shahar Levi <shahar_levi@ti.com> Signed-off-by:
-
Javier Cardona authored
Signed-off-by:
Javier Cardona <javier@cozybit.com> Signed-off-by:
-
Javier Cardona authored
Per sec 7.1.3.5 of draft 12.0 of 802.11s, mesh frames indicate the presence of the mesh control header in their QoS header. Signed-off-by:
-
Javier Cardona authored
In order to support QoS in mesh, we need to assign queue mapping only after the next hop has been resolved, both for forwarded and locally originated frames. Also, now that this is fixed, remove the XXX comment in ieee80211_select_queue(). Also, V-Shy Ho reported that the queue mapping was not being applied to the forwarded frame (fwd_skb instead of skb). Fixed that as well. Signed-off-by:
-
Helmut Schaa authored
Reading the TX desciptor words from coherent memory is always uncached and potentially slow. Hence, don't read the TX descriptor prior to writing it since we update all fields anyway. Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
