mtd: spi-nor: Prepare core / manufacturer code split

Move all SPI NOR controller drivers to a controllers/ sub-directory
so that we only have SPI NOR related source files under
drivers/mtd/spi-nor/.

Rename spi-nor.c into core.c, we are about to split this file in multiple
source files (one per manufacturer, plus one for the SFDP parsing logic).

Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>

drivers/mtd/spi-nor/Kconfig

@@ -24,79 +24,6 @@ config MTD_SPI_NOR_USE_4K_SECTORS
 	  Please note that some tools/drivers/filesystems may not work with
 	  4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
 
-config SPI_ASPEED_SMC
-	tristate "Aspeed flash controllers in SPI mode"
-	depends on ARCH_ASPEED || COMPILE_TEST
-	depends on HAS_IOMEM && OF
-	help
-	  This enables support for the Firmware Memory controller (FMC)
-	  in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips,
-	  and support for the SPI flash memory controller (SPI) for
-	  the host firmware. The implementation only supports SPI NOR.
-
-config SPI_CADENCE_QUADSPI
-	tristate "Cadence Quad SPI controller"
-	depends on OF && (ARM || ARM64 || COMPILE_TEST)
-	help
-	  Enable support for the Cadence Quad SPI Flash controller.
-
-	  Cadence QSPI is a specialized controller for connecting an SPI
-	  Flash over 1/2/4-bit wide bus. Enable this option if you have a
-	  device with a Cadence QSPI controller and want to access the
-	  Flash as an MTD device.
-
-config SPI_HISI_SFC
-	tristate "Hisilicon FMC SPI-NOR Flash Controller(SFC)"
-	depends on ARCH_HISI || COMPILE_TEST
-	depends on HAS_IOMEM
-	help
-	  This enables support for HiSilicon FMC SPI-NOR flash controller.
-
-config SPI_NXP_SPIFI
-	tristate "NXP SPI Flash Interface (SPIFI)"
-	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
-	depends on HAS_IOMEM
-	help
-	  Enable support for the NXP LPC SPI Flash Interface controller.
-
-	  SPIFI is a specialized controller for connecting serial SPI
-	  Flash. Enable this option if you have a device with a SPIFI
-	  controller and want to access the Flash as a mtd device.
-
-config SPI_INTEL_SPI
-	tristate
-
-config SPI_INTEL_SPI_PCI
-	tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)"
-	depends on X86 && PCI
-	select SPI_INTEL_SPI
-	help
-	  This enables PCI support for the Intel PCH/PCU SPI controller in
-	  master mode. This controller is present in modern Intel hardware
-	  and is used to hold BIOS and other persistent settings. Using
-	  this driver it is possible to upgrade BIOS directly from Linux.
-
-	  Say N here unless you know what you are doing. Overwriting the
-	  SPI flash may render the system unbootable.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called intel-spi-pci.
-
-config SPI_INTEL_SPI_PLATFORM
-	tristate "Intel PCH/PCU SPI flash platform driver (DANGEROUS)"
-	depends on X86
-	select SPI_INTEL_SPI
-	help
-	  This enables platform support for the Intel PCH/PCU SPI
-	  controller in master mode. This controller is present in modern
-	  Intel hardware and is used to hold BIOS and other persistent
-	  settings. Using this driver it is possible to upgrade BIOS
-	  directly from Linux.
-
-	  Say N here unless you know what you are doing. Overwriting the
-	  SPI flash may render the system unbootable.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called intel-spi-platform.
+source "drivers/mtd/spi-nor/controllers/Kconfig"
 
 endif # MTD_SPI_NOR

drivers/mtd/spi-nor/Makefile

 # SPDX-License-Identifier: GPL-2.0
+
+spi-nor-objs			:= core.o
 obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
-obj-$(CONFIG_SPI_ASPEED_SMC)	+= aspeed-smc.o
-obj-$(CONFIG_SPI_CADENCE_QUADSPI)	+= cadence-quadspi.o
-obj-$(CONFIG_SPI_HISI_SFC)	+= hisi-sfc.o
-obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
-obj-$(CONFIG_SPI_INTEL_SPI)	+= intel-spi.o
-obj-$(CONFIG_SPI_INTEL_SPI_PCI)	+= intel-spi-pci.o
-obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM)	+= intel-spi-platform.o

drivers/mtd/spi-nor/controllers/Kconfig

+# SPDX-License-Identifier: GPL-2.0-only
+config SPI_ASPEED_SMC
+	tristate "Aspeed flash controllers in SPI mode"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  This enables support for the Firmware Memory controller (FMC)
+	  in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips,
+	  and support for the SPI flash memory controller (SPI) for
+	  the host firmware. The implementation only supports SPI NOR.
+
+config SPI_CADENCE_QUADSPI
+	tristate "Cadence Quad SPI controller"
+	depends on OF && (ARM || ARM64 || COMPILE_TEST)
+	help
+	  Enable support for the Cadence Quad SPI Flash controller.
+
+	  Cadence QSPI is a specialized controller for connecting an SPI
+	  Flash over 1/2/4-bit wide bus. Enable this option if you have a
+	  device with a Cadence QSPI controller and want to access the
+	  Flash as an MTD device.
+
+config SPI_HISI_SFC
+	tristate "Hisilicon FMC SPI-NOR Flash Controller(SFC)"
+	depends on ARCH_HISI || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This enables support for HiSilicon FMC SPI-NOR flash controller.
+
+config SPI_NXP_SPIFI
+	tristate "NXP SPI Flash Interface (SPIFI)"
+	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+	depends on HAS_IOMEM
+	help
+	  Enable support for the NXP LPC SPI Flash Interface controller.
+
+	  SPIFI is a specialized controller for connecting serial SPI
+	  Flash. Enable this option if you have a device with a SPIFI
+	  controller and want to access the Flash as a mtd device.
+
+config SPI_INTEL_SPI
+	tristate
+
+config SPI_INTEL_SPI_PCI
+	tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)"
+	depends on X86 && PCI
+	select SPI_INTEL_SPI
+	help
+	  This enables PCI support for the Intel PCH/PCU SPI controller in
+	  master mode. This controller is present in modern Intel hardware
+	  and is used to hold BIOS and other persistent settings. Using
+	  this driver it is possible to upgrade BIOS directly from Linux.
+
+	  Say N here unless you know what you are doing. Overwriting the
+	  SPI flash may render the system unbootable.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel-spi-pci.
+
+config SPI_INTEL_SPI_PLATFORM
+	tristate "Intel PCH/PCU SPI flash platform driver (DANGEROUS)"
+	depends on X86
+	select SPI_INTEL_SPI
+	help
+	  This enables platform support for the Intel PCH/PCU SPI
+	  controller in master mode. This controller is present in modern
+	  Intel hardware and is used to hold BIOS and other persistent
+	  settings. Using this driver it is possible to upgrade BIOS
+	  directly from Linux.
+
+	  Say N here unless you know what you are doing. Overwriting the
+	  SPI flash may render the system unbootable.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel-spi-platform.

drivers/mtd/spi-nor/controllers/Makefile

+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_SPI_ASPEED_SMC)	+= aspeed-smc.o
+obj-$(CONFIG_SPI_CADENCE_QUADSPI)	+= cadence-quadspi.o
+obj-$(CONFIG_SPI_HISI_SFC)	+= hisi-sfc.o
+obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
+obj-$(CONFIG_SPI_INTEL_SPI)	+= intel-spi.o
+obj-$(CONFIG_SPI_INTEL_SPI_PCI)	+= intel-spi-pci.o
+obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM)	+= intel-spi-platform.o