PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver DT bindings

Add DT bindings for the Mobiveil PCIe Host Bridge IP driver and update the
vendor prefixes file.

Signed-off-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/pci/mobiveil-pcie.txt

+* Mobiveil AXI PCIe Root Port Bridge DT description
+
+Mobiveil's GPEX 4.0 is a PCIe Gen4 root port bridge IP. This configurable IP
+has up to 8 outbound and inbound windows for the address translation.
+
+Required properties:
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- compatible: Should contain "mbvl,gpex40-pcie"
+- reg: Should contain PCIe registers location and length
+	"config_axi_slave": PCIe controller registers
+	"csr_axi_slave"	  : Bridge config registers
+	"gpio_slave"	  : GPIO registers to control slot power
+	"apb_csr"	  : MSI registers
+
+- device_type: must be "pci"
+- apio-wins : number of requested apio outbound windows
+		default 2 outbound windows are configured -
+		1. Config window
+		2. Memory window
+- ppio-wins : number of requested ppio inbound windows
+		default 1 inbound memory window is configured.
+- bus-range: PCI bus numbers covered
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- interrupt-parent : phandle to the interrupt controller that
+		it is attached to, it should be set to gic to point to
+		ARM's Generic Interrupt Controller node in system DT.
+- interrupts: The interrupt line of the PCIe controller
+		last cell of this field is set to 4 to
+		denote it as IRQ_TYPE_LEVEL_HIGH type interrupt.
+- interrupt-map-mask,
+	interrupt-map: standard PCI properties to define the mapping of the
+	PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is not
+	supported by hardware)
+	Please refer to the standard PCI bus binding document for a more
+	detailed explanation
+
+
+Example:
+++++++++
+	pcie0: pcie@a0000000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		compatible = "mbvl,gpex40-pcie";
+		reg =	<0xa0000000 0x00001000>,
+			<0xb0000000 0x00010000>,
+			<0xff000000 0x00200000>,
+			<0xb0010000 0x00001000>;
+		reg-names =	"config_axi_slave",
+				"csr_axi_slave",
+				"gpio_slave",
+				"apb_csr";
+		device_type = "pci";
+		apio-wins = <2>;
+		ppio-wins = <1>;
+		bus-range = <0x00000000 0x000000ff>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		interrupts = < 0 89 4 >;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 0 &pci_express 0>,
+				<0 0 0 1 &pci_express 1>,
+				<0 0 0 2 &pci_express 2>,
+				<0 0 0 3 &pci_express 3>;
+		ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
+
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -203,6 +203,7 @@ lwn	Liebherr-Werk Nenzing GmbH
 macnica	Macnica Americas
 marvell	Marvell Technology Group Ltd.
 maxim	Maxim Integrated Products
+mbvl	Mobiveil Inc.
 mcube	mCube
 meas	Measurement Specialties
 mediatek	MediaTek Inc.

MAINTAINERS

@@ -9393,6 +9393,13 @@ Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 S:	Maintained
 F:	drivers/media/dvb-frontends/mn88473*
 
+PCI DRIVER FOR MOBIVEIL PCIE IP
+M:	Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
+L:	linux-pci@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
+F:	drivers/pci/host/pcie-mobiveil.c
+
 MODULE SUPPORT
 M:	Jessica Yu <jeyu@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next