Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

am335x-boneblue: spidev, cheat with the rohm,dh2228fv compatible, works the same as spidev, but no kernel warning

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

This reverts commit 84efb1af

.

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

This makes /sys/class/pwm/pwmchip0,4,2 available.
This patch is likely incomplete.

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

BBBlue has external JST-SH 6-pin connectors for spi1
S1.0 and S1.1. Make these available as spidev.

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

Found by accident, correlates with

https://git.beagleboard.org/beagleboard/BeagleBoard-DeviceTrees/-/merge_requests/61



therefore mentioned as Co-Author.

Co-authored-by: Phil Doyle <gitlab@takingiteasy.co.uk>
Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

Copy the PINs from Overlay and enable the I2C1 peripheral.

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

which invalidates the already configured &tps node and
disabled the power button again!

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

Set the PMICs Power Button to OKAY.

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

The user leds on the beaglebone blue are blue.
Therefore change the color named in dts.

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

arm64: overlays: Add overlay to make mikrobus as native peripheral signals

See merge request !68

Set the mikrobus header signals to native linux signals - this saves
people the headache of trying to figure  out how to setup various
peripherals.

Signed-off-by: Nishanth Menon <nm@ti.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

arm64: overlays: k3-am625-beagleplay-release-mikrobus: Add dummy spidev

See merge request !66

Add dummy spidevice to export the spibus to userspace

one still must do a modprobe spidev to get access.

This appears as /dev/spidev1.0

Reported-by: Nathan Kaplan <n-kaplan@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>

am335x-bone-common.dtsi: more reset-assert-us/reset-deassert-us fixup for C3, and vcc-supply for eeprom

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

GPIO PHY reset on Rev C3 boards

See merge request beagleboard/BeagleBoard-DeviceTrees!65

This incorporates Tim Small's recommended delay value of 280us.

https://forum.digikey.com/t/ethernet-device-is-not-detecting-on-ubuntu-20-04-lts-on-bbg/19948/71
https://forum.beagleboard.org/t/recognizing-a-beaglebone-black-rev-c3-board/31249/11

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

arm64: overlays: k3-am625-beagleplay-release-mikrobus: Set the default

See merge request !64