diff --git a/boards/beaglebone/ai/ch02.rst b/boards/beaglebone/ai/ch02.rst deleted file mode 100644 index b31c26639dfd27c559da69c065fe98212822d8c0..0000000000000000000000000000000000000000 --- a/boards/beaglebone/ai/ch02.rst +++ /dev/null @@ -1,71 +0,0 @@ -.. _beaglebone-ai-change-history: - -Change History -################## - -.. Document Change History -.. **************************** - -.. Board changes -.. **************************** - -Rev A0 -******* - -Initial prototype revision. Not taken to production. -eMMC flash image provided by Embest. - -Rev A1 -******* - -Second round prototype. - -- Fixed size of mounting holes. -- Added LED for WiFi status. -- Added microHDMI. -- Changed eMMC voltage from 3.3V to 1.8V to support HS200. -- Changed eMMC from 4GB to 16GB. -- Changed serial debug header from 6-pin 100mil pitch to 3-pin 1.5mm pitch. -- Switched expansion header from UART4 to UART5. The UART4 pins were used for the microHDMI. - -eMMC flash image provided by Embest. - -Rev A1a -******** - -Alpha pilot-run units and initial production. - -- `Added pull-down resistor on serial debug header RX - line <https://git.beagleboard.org/beagleboard/beaglebone-ai/-/issues/24>`__. - -Alpha pilot-run eMMC flash image: -https://debian.beagleboard.org/images/bbai-pilot-20190408.img.xz - -Production eMMC flash image: -http://debian.beagleboard.org/images/am57xx-eMMC-flasher-debian-9.9-lxqt-armhf-2019-08-03-4gb.img.xz - -Rev A2 -******* - -Proposed changes. - -- `HW: need pull-down on console uart RX line - <https://git.beagleboard.org/beagleboard/beaglebone-ai/-/issues/24>`__. - -- `HW: position of microSD may impact existing case designs - <https://git.beagleboard.org/beagleboard/beaglebone-ai/-/issues/25>`__. - -- `HW: P9.13 does not have a GPIO - <https://git.beagleboard.org/beagleboard/beaglebone-ai/-/issues/22>`__. - -- `HW: HDMI hotplug detection not working - <https://git.beagleboard.org/beagleboard/beaglebone-ai/issues/19>`__. - -- `HW: add extra DCAN - <https://git.beagleboard.org/beagleboard/beaglebone-ai/issues/20>`__. - -- `HW: wire mods required to enable JTAG - <https://git.beagleboard.org/beagleboard/beaglebone-ai/issues/21>`__. - -- `HW: Small I2C nvmem/eeprom for board identifier - <https://git.beagleboard.org/beagleboard/beaglebone-ai/issues/23>`__. diff --git a/boards/beaglebone/ai/ch09.rst b/boards/beaglebone/ai/ch09.rst deleted file mode 100644 index 5c20ab50456e7e690924254f058d9b243cf73d6a..0000000000000000000000000000000000000000 --- a/boards/beaglebone/ai/ch09.rst +++ /dev/null @@ -1,15 +0,0 @@ -.. _beaglebone-ai-mechanical: - -Mechanical Information -######################## - -- Board Dimensions: 8.9cm x 5.4cm x 1.5cm - -- Board Net Weight 48g - -- Packaging Dimensions: 13.8cm x 10cm x 4cm - -- Gross Weight (including packaging): 110g - -- 3D STEP model: - https://git.beagleboard.org/beagleboard/beaglebone-ai/-/tree/master/Mechanical \ No newline at end of file diff --git a/boards/beaglebone/ai/ch10.rst b/boards/beaglebone/ai/ch10.rst deleted file mode 100644 index 22ca481c6453e82604d060651b8b98b775b2a149..0000000000000000000000000000000000000000 --- a/boards/beaglebone/ai/ch10.rst +++ /dev/null @@ -1,13 +0,0 @@ -.. _beaglebone-ai-pictures: - -Pictures -######### - -BeagleBone AI Back of Board Image - - -.. image:: images/BB_AI_Front.jpg - :align: center - -.. image:: images/BB_AI_Back.jpg - :align: center \ No newline at end of file diff --git a/boards/beaglebone/ai/ch12.rst b/boards/beaglebone/ai/ch12.rst deleted file mode 100644 index f43f53ae5b46fdca6fb3d00794f279d1fdc94d7e..0000000000000000000000000000000000000000 --- a/boards/beaglebone/ai/ch12.rst +++ /dev/null @@ -1,193 +0,0 @@ -.. _beaglebone-ai-terms-condition: - -Terms and Conditions -##################### - -REGULATORY, COMPLIANCE, AND EXPORT INFORMATION -************************************************* - -- Country of origin: PRC -- FCC: 2ATUT-BBONE-AI -- CE: TBD -- CNHTS: 8543909000 -- USHTS: 8473301180 -- MXHTS: 84733001 -- TARIC: 8473302000 -- ECCN: 5A992.C -- CCATS: - `Z1613110/G180570 <https://git.beagleboard.org/beagleboard/beaglebone-ai/-/tree/master/regulatory/Validation_Z1613110.pdf>`__ -- RoHS/REACH: TBD -- Volatility: TBD - -BeagleBone AI is annotated to comply with Part 15 of the FCC Rules. -Operation is subject to the following two conditions: (1) This device -may not cause harmful interference, and (2) this device must accept any -interference received, including interference that may cause undesired -operation. Changes or modifications not expressly approved by the party -responsible for compliance could void the user’s authority to operate -the equipment. - -This Class A or B digital apparatus complies with Canadian ICES-003. -Changes or modifications not expressly approved by the party responsible -for compliance could void the user’s authority to operate the equipment. - -Cet appareil numérique de la classe A ou B est conforme à la norme -NMB-003 du Canada. Les changements ou les modifications pas expressément -approuvés par la partie responsible de la conformité ont pu vider -l’autorité de l’utilisateur pour actionner l’équipement. - -WARRANTY AND DISCLAIMERS -**************************** - -The design materials referred to in this document are *\*NOT -SUPPORTED\** and **DO NOT** constitute a reference design. Support of -the open source developer community is provided through the -resources defined at https://docs.beagleboard.org/latest/intro/support/index.html. - -THERE IS NO WARRANTY FOR THE DESIGN MATERIALS, TO THE EXTENT PERMITTED -BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT -HOLDERS AND/OR OTHER PARTIES PROVIDE THE DESIGN MATERIALS “AS IS†-WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, -BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND -FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND -PERFORMANCE OF THE DESIGN MATERIALS IS WITH YOU. SHOULD THE DESIGN -MATERIALS PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY -SERVICING, REPAIR OR CORRECTION. - -This board was designed as an evaluation and development tool. It was -not designed with any other application in mind. As such, the design -materials that are provided which include schematic, BOM, and PCB files, -may or may not be suitable for any other purposes. If used, the design -material becomes your responsibility as to whether or not it meets your -specific needs or your specific applications and may require changes to -meet your requirements. - -Additional terms -================= - -BeagleBoard.org Foundation and logo-licensed manufacturers (together, -henceforth identified as "Supplier") provide BeagleBone AI under the -following conditions: - -The user assumes all responsibility and liability for proper and safe -handling of the goods. Further, the user indemnifies Supplier from all -claims arising from the handling or use of the goods. - -Should BeagleBone AI not meet the specifications indicated in the System -Reference Manual, BeagleBone AI may be returned within 90 days from the -date of delivery to the distributor of purchase for a full refund. THE -FOREGOING LIMITED WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO -BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR -STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY -PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH -ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, -SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. - -Please read the System Reference Manual and, specifically, the Warnings -and Restrictions notice in the Systems Reference Manual prior to -handling the product. This notice contains important safety information -about temperatures and voltages. - -No license is granted under any patent right or other intellectual -property right of Supplier covering or relating to any machine, process, -or combination in which such Supplier products or services might be or -are used. The Supplier currently deals with a variety of customers for -products, and therefore our arrangement with the user is not exclusive. -The Supplier assume no liability for applications assistance, customer -product design, software performance, or infringement of patents or -services described herein. - -Warnings and Restrictions -****************************************** - -For Feasibility Evaluation Only, in Laboratory/Development Environments -======================================================================== - -BeagleBone AI is not a complete product. It is intended solely for use -for preliminary feasibility evaluation in laboratory/development -environments by technically qualified electronics experts who are -familiar with the dangers and application risks associated with handling -electrical mechanical components, systems and subsystems. It should not -be used as all or part of a finished end product. - -Your Sole Responsibility and Risk -========================================== - -You acknowledge, represent, and agree that: - -1. You have unique knowledge concerning Federal, State and local - regulatory requirements (including but not limited to Food and Drug - Administration regulations, if applicable) which relate to your - products and which relate to your use (and/or that of your employees, - affiliates, contractors or designees) of BeagleBone AI for - evaluation, testing and other purposes. - -2. You have full and exclusive responsibility to assure the safety and - compliance of your products with all such laws and other applicable - regulatory requirements, and also to assure the safety of any - activities to be conducted by you and/or your employees, affiliates, - contractors or designees, using BeagleBone AI. Further, you are - responsible to assure that any interfaces (electronic and/or - mechanical) between BeagleBone AI and any human body are designed - with suitable isolation and means to safely limit accessible leakage - currents to minimize the risk of electrical shock hazard. - -3. Since BeagleBone AI is not a completed product, it may not meet all - applicable regulatory and safety compliance standards which may - normally be associated with similar items. You assume full - responsibility to determine and/or assure compliance with any such - standards and related certifications as may be applicable. You will - employ reasonable safeguards to ensure that your use of BeagleBone AI - will not result in any property damage, injury or death, even if - BeagleBone AI should fail to perform as described or expected. - -Certain Instructions -====================== - -It is important to operate BeagleBone AI within Supplier’s recommended -specifications and environmental considerations per the user guidelines. -Exceeding the specified BeagleBone AI ratings (including but not limited -to input and output voltage, current, power, and environmental ranges) -may cause property damage, personal injury or death. If there are -questions concerning these ratings please contact the Supplier -representative prior to connecting interface electronics including input -power and intended loads. Any loads applied outside of the specified -output range may result in unintended and/or inaccurate operation and/or -possible permanent damage to BeagleBone AI and/or interface electronics. -Please consult the System Reference Manual prior to connecting any load -to BeagleBone AI output. If there is uncertainty as to the load -specification, please contact the Supplier representative. During normal -operation, some circuit components may have case temperatures greater -than 60 C as long as the input and output are maintained at a normal -ambient operating temperature. These components include but are not -limited to linear regulators, switching transistors, pass transistors, -and current sense resistors which can be identified using BeagleBone -AI’s schematic located at the link in BeagleBone AI’s System Reference -Manual. When placing measurement probes near these devices during normal -operation, please be aware that these devices may be very warm to the -touch. As with all electronic evaluation tools, only qualified personnel -knowledgeable in electronic measurement and diagnostics normally found -in development environments should use BeagleBone AI. - -Agreement to Defend, Indemnify and Hold Harmless -================================================= - -You agree to defend, indemnify and hold Supplier, its licensors and -their representatives harmless from and against any and all claims, -damages, losses, expenses, costs and liabilities (collectively, -"Claims") arising out of or in connection with any use of BeagleBone AI -that is not in accordance with the terms of the agreement. This -obligation shall apply whether Claims arise under law of tort or -contract or any other legal theory, and even if BeagleBone AI fails to -perform as described or expected. - -Safety-Critical or Life-Critical Applications -=============================================== - -If you intend to evaluate the components for possible use in safety -critical applications (such as life support) where a failure of the -Supplier’s product would reasonably be expected to cause severe personal -injury or death, such as devices which are classified as FDA Class III -or similar classification, then you must specifically notify Supplier of -such intent and enter into a separate Assurance and Indemnity Agreement. -