diff --git a/boards/beagleplay/02-change-history.rst b/boards/beagleplay/02-change-history.rst
deleted file mode 100644
index 5f21c69d049e92ebba504e4c8c16b0ccd2766798..0000000000000000000000000000000000000000
--- a/boards/beagleplay/02-change-history.rst
+++ /dev/null
@@ -1,51 +0,0 @@
-.. _beagleplay-change-history:
-
-Change History
-###############
-
-.. note::
- This section describes the change history of this document and board.
- Document changes are not always a result of a board change. A board
- change will always result in a document change.
-
-.. _beagleplay-document-changes:
-
-Document Changes
-******************
-
-.. _beagleplay-board-changes:
-
-Board Changes
-**************
-
-.. table:: BeaglePlay Board change history
-
- +---------+------------------------------------------------------------+----------------------+-------+
- | Rev | Changes | Date | By |
- +=========+============================================================+======================+=======+
- | 0.20 | DVT1 Board release | September 15th 2022 | qxn |
- +---------+------------------------------------------------------------+----------------------+-------+
- | 0.21 | 1. Modify all crystal CL value to match frequency | November 10th 2022 | qxn |
- | | 2. Add serial termination resistors for RGB data lane | | |
- | | 3. Add CMC on HDMI output | | |
- | | 4. Use WKUP_CLKOUT0 for WiFi | | |
- | | 5. Use MCU_OBSCLK0 for GBE | | |
- | | 6. Increase resistance on all board LEDs | | |
- | | 7. Remove R243 TP_INT Pulldown | | |
- | | 8. Add ferrite bead on Grove and QWIIC | | |
- | | 9. Add feed forward capacitor on TLV62595 | | |
- | | 10. Remove ESDs on HDMI TMDS signals | | |
- +---------+------------------------------------------------------------+----------------------+-------+
- | 0.22 | 1. Add feed forward capacitor on TLV62595 | December 12th 2022 | qxn |
- | | 2. Remove ESDs on HDMI TMDS signals | | |
- | | 3. Add ferrite bead on HDMI shield | | |
- | | 4. Change R16 and R80 to 0R | | |
- | | 5. Change pullup resistors to 2.2k on I2C0-I2C3 | | |
- | | 6. Change FB30 and FB31 to 0R | | |
- +---------+------------------------------------------------------------+----------------------+-------+
- | 1.0 | 1. Add testpoint to QWIIC | December 27th 2022 | qxn |
- | | 2. Add serial resistors on I2C0 - I2C3 SCL | | |
- | | 3. Add more capacitors on VDD_1V2 | | |
- | | 4. Add 0R on HDMI shield | | |
- | | 5. Add series resistor on SPE LED control | | |
- +---------+------------------------------------------------------------+----------------------+-------+
\ No newline at end of file
diff --git a/boards/beagleplay/11-mechanical-specifications.rst b/boards/beagleplay/11-mechanical-specifications.rst
index 84c78d56069aa0104507bd1e05c329ce6b16aba5..a585f173324875350e1d0029f2d298e166f0c0e6 100644
--- a/boards/beagleplay/11-mechanical-specifications.rst
+++ b/boards/beagleplay/11-mechanical-specifications.rst
@@ -25,3 +25,16 @@ Dimensions & weight
+--------------------+----------------------------------------------------+
| Weight | 55.3g |
+--------------------+----------------------------------------------------+
+
+Additional Pictures
+###################
+
+.. image:: images/45back.png
+ :align: center
+ :width: 700
+ :alt: BeaglePlay back image (45 degree rotated)
+
+.. image:: images/45front.png
+ :align: center
+ :width: 700
+ :alt: BeaglePlay front image (45 degree rotated)