diff --git a/accessories/cables.rst b/accessories/cables.rst
index f5ae8ab32757b7f813f64898a81d3baa0bc7f91d..8b9f529a33c66a260cc4f8b1a369e613497948b0 100644
--- a/accessories/cables.rst
+++ b/accessories/cables.rst
@@ -32,7 +32,7 @@ BeagleBone AI-64 you'll have to procure your own USB cable.
+----------------------------+--------------+
Serial Debug Cables
-====================
+********************
The default serial port settings for the board are:
@@ -53,7 +53,7 @@ The default serial port settings for the board are:
+--------------+--------------+
Standard FTDI Cable
---------------------
+====================
The debug cable is a standard FTDI to TTL cable. Make sure you get the 3.3V version.
You can purchase this from several different sources including but not limited to:
@@ -71,7 +71,7 @@ You can purchase this from several different sources including but not limited t
Pin 1 on the cable is the black wire and connects to pin 1 on the board, the pin with the white dot next to it.
Adafruit 4 Pin Cable (PL2303)
-------------------------------
+==============================
One is from `Adafruit <http://www.adafruit.com/products/954>`_. This is a Prolific chipset based cable.
Some people have reported issues with the cable causing some issues with data corruption. You experience
@@ -101,7 +101,7 @@ may vary. You will need to install the Prolific drivers. Those can be downloaded
You will also find an extra RED wire on this cable. Just leave it unconnected.
FTDI 3 Pin Cable
------------------
+=================
You can purchase the another version direct from **FTDI This cable only has three wires for connection.
You can find the datasheet and a picture at** Cable
@@ -123,7 +123,7 @@ You can find the datasheet and a picture at** Cable
The swapping of TX and RX takes place on the board.
Olimex 3 Pin Cable (PL2303)
-----------------------------
+============================
A third version is sold by `Olimex <https://www.olimex.com/Products/Components/Cables/USB-Serial-Cable/USB-Serial-Cable-F/>`_
@@ -142,29 +142,32 @@ A third version is sold by `Olimex <https://www.olimex.com/Products/Components/C
HDMI Cables
-============
+************
Working HDMI Cables
---------------------
+====================
The board uses a microHDMI cable. Sources include but are not limited to:
- `Amazon <http://www.amazon.com/Amzer-Micro-HDMI-Speed-Cable/dp/B003OBZSHC>`_
- `Staples <http://www.staples.com/Staples-HDMI-To-Micro-D-HDMI-Cable/product_926993>`_
- `Mediabridge <http://www.mediabridgeproducts.com/store/pc/6FT-FLEX-Series-High-Speed-Micro-HDMI-to-HDMI-Cable-with-Ethernet-p246.htm>`_
-- `Monoprice <http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10253&cs_id=1025301&p_id=7557&seq=1&format=2>`_ NOTE: Reports are that this cable does not work with the `Adafruit Clear Top Case <http://www.adafruit.com/products/1555>`_.
+- `Monoprice <http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10253&cs_id=1025301&p_id=7557&seq=1&format=2>`_ [#]_
.. image:: images/MicroHDMI.jpg
:align: center
:alt: MicroHDMI to HDMI cable
Bad HDMI Cables
-----------------
+================
`High Speed HDMI Cable with Ethernet ,Type D Micro M/M Cable <http://www.newegg.com/Product/Product.aspx?Item=N82E16882241049>`_: Didn't work, not grounded.
-Working MiniDP to HDMI
------------------------
+miniDP to HDMI
+****************
+
+Working miniDP to HDMI
+=======================
.. note::
BeagleBone-AI64 requires **ACTIVE** miniDP to HDMI cable or adaptor to work,
@@ -174,17 +177,12 @@ Working MiniDP to HDMI
- `CableCreation Mini DP (Thunderbolt 2 Compatible) to HDMI <https://www.amazon.in/CD0257-Mini-DP-to-HDMI/dp/B01FM51O0W/>`_
Bad MiniDP to HDMI
--------------------
+===================
- `UGREEN Mini DP Male to HDMI <https://www.amazon.in/Mini-Male-Female-Converter-Cable/dp/B01CL1P6TA/>`_
- `AGARO Mini Displayport (Mini Dp) To Hdmi <https://www.amazon.in/AGARO-Meters-Laptop-Computers-Mobile/dp/B09GW1NMNZ/>`_
- `AmazonBasics Mini Display Port to HDMI <https://www.amazon.in/AmazonBasics-Mini-DisplayPort-HDMI-Adapter/dp/B0134V3KIA/>`_
-USB Cables
------------
-
-According the board you have, you can choose any cable to handle the current required like,
-- MicroUSB to TypeA (3Amp)
-- Type-C to Type-A (5Amp)
+.. [#] Reports are that this cable does not work with the `Adafruit Clear Top Case <http://www.adafruit.com/products/1555>`_