diff --git a/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt
new file mode 100644
index 0000000000000000000000000000000000000000..703979dbd577d7d57754cc192bc718632cc2c809
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt
@@ -0,0 +1,33 @@
+Amazon's Annapurna Labs Thermal Sensor
+
+Simple thermal device that allows temperature reading by a single MMIO
+transaction.
+
+Required properties:
+- compatible: "amazon,al-thermal".
+- reg: The physical base address and length of the sensor's registers.
+- #thermal-sensor-cells: Must be 1. See ./thermal.txt for a description.
+
+Example:
+ thermal: thermal {
+ compatible = "amazon,al-thermal";
+ reg = <0x0 0x05002860 0x0 0x1>;
+ #thermal-sensor-cells = <0x1>;
+ };
+
+ thermal-zones {
+ thermal-z0 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&thermal 0>;
+ trips {
+ critical {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
index b6c0ae53d4dca345f3b751df5b39217497d075fa..f02f38527a6b6397a73f0c3c3935918c7d1d64fb 100644
--- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
@@ -52,13 +52,47 @@ Required properties :
Must set as following values:
TEGRA_SOCTHERM_THROT_LEVEL_LOW, TEGRA_SOCTHERM_THROT_LEVEL_MED
TEGRA_SOCTHERM_THROT_LEVEL_HIGH, TEGRA_SOCTHERM_THROT_LEVEL_NONE
+ - nvidia,gpu-throt-level: This property is for Tegra124 and Tegra210.
+ It is the level of pulse skippers, which used to throttle clock
+ frequencies. It indicates gpu clock throttling depth and can be
+ programmed to any of the following values which represent a throttling
+ percentage:
+ TEGRA_SOCTHERM_THROT_LEVEL_NONE (0%)
+ TEGRA_SOCTHERM_THROT_LEVEL_LOW (50%),
+ TEGRA_SOCTHERM_THROT_LEVEL_MED (75%),
+ TEGRA_SOCTHERM_THROT_LEVEL_HIGH (85%).
- #cooling-cells: Should be 1. This cooling device only support on/off state.
See ./thermal.txt for a description of this property.
+ Optional properties: The following properties are T210 specific and
+ valid only for OCx throttle events.
+ - nvidia,count-threshold: Specifies the number of OC events that are
+ required for triggering an interrupt. Interrupts are not triggered if
+ the property is missing. A value of 0 will interrupt on every OC alarm.
+ - nvidia,polarity-active-low: Configures the polarity of the OC alaram
+ signal. If present, this means assert low, otherwise assert high.
+ - nvidia,alarm-filter: Number of clocks to filter event. When the filter
+ expires (which means the OC event has not occurred for a long time),
+ the counter is cleared and filter is rearmed. Default value is 0.
+ - nvidia,throttle-period-us: Specifies the number of uSec for which
+ throttling is engaged after the OC event is deasserted. Default value
+ is 0.
+
+Optional properties:
+- nvidia,thermtrips : When present, this property specifies the temperature at
+ which the soctherm hardware will assert the thermal trigger signal to the
+ Power Management IC, which can be configured to reset or shutdown the device.
+ It is an array of pairs where each pair represents a tsensor id followed by a
+ temperature in milli Celcius. In the absence of this property the critical
+ trip point will be used for thermtrip temperature.
+
Note:
-- the "critical" type trip points will be set to SOC_THERM hardware as the
-shut down temperature. Once the temperature of this thermal zone is higher
-than it, the system will be shutdown or reset by hardware.
+- the "critical" type trip points will be used to set the temperature at which
+the SOC_THERM hardware will assert a thermal trigger if the "nvidia,thermtrips"
+property is missing. When the thermtrips property is present, the breach of a
+critical trip point is reported back to the thermal framework to implement
+software shutdown.
+
- the "hot" type trip points will be set to SOC_THERM hardware as the throttle
temperature. Once the the temperature of this thermal zone is higher
than it, it will trigger the HW throttle event.
@@ -79,25 +113,32 @@ Example :
#thermal-sensor-cells = <1>;
+ nvidia,thermtrips = <TEGRA124_SOCTHERM_SENSOR_CPU 102500
+ TEGRA124_SOCTHERM_SENSOR_GPU 103000>;
+
throttle-cfgs {
/*
* When the "heavy" cooling device triggered,
- * the HW will skip cpu clock's pulse in 85% depth
+ * the HW will skip cpu clock's pulse in 85% depth,
+ * skip gpu clock's pulse in 85% level
*/
throttle_heavy: heavy {
nvidia,priority = <100>;
nvidia,cpu-throt-percent = <85>;
+ nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
#cooling-cells = <1>;
};
/*
* When the "light" cooling device triggered,
- * the HW will skip cpu clock's pulse in 50% depth
+ * the HW will skip cpu clock's pulse in 50% depth,
+ * skip gpu clock's pulse in 50% level
*/
throttle_light: light {
nvidia,priority = <80>;
nvidia,cpu-throt-percent = <50>;
+ nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_LOW>;
#cooling-cells = <1>;
};
@@ -107,6 +148,17 @@ Example :
* arbiter will select the highest priority as the final throttle
* settings to skip cpu pulse.
*/
+
+ throttle_oc1: oc1 {
+ nvidia,priority = <50>;
+ nvidia,polarity-active-low;
+ nvidia,count-threshold = <100>;
+ nvidia,alarm-filter = <5100000>;
+ nvidia,throttle-period-us = <0>;
+ nvidia,cpu-throt-percent = <75>;
+ nvidia,gpu-throt-level =
+ <TEGRA_SOCTHERM_THROT_LEVEL_MED>;
+ };
};
};
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 1d9e8cf6101819244d2e59ebf79bd6db43d46f8b..673cc1831ee9d04f3d9bc9987b518773df000bcb 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -6,11 +6,14 @@ Required properties:
- "qcom,msm8916-tsens" (MSM8916)
- "qcom,msm8974-tsens" (MSM8974)
- "qcom,msm8996-tsens" (MSM8996)
+ - "qcom,qcs404-tsens", "qcom,tsens-v1" (QCS404)
- "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
- "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
with version 2 of the TSENS IP. MSM8996 is the only exception because the
generic property did not exist when support was added.
+ Similarly, the generic "qcom,tsens-v1" property must be used as a fallback for
+ any SoC with version 1 of the TSENS IP.
- reg: Address range of the thermal registers.
New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
@@ -39,3 +42,14 @@ tsens0: thermal-sensor@c263000 {
#qcom,sensors = <13>;
#thermal-sensor-cells = <1>;
};
+
+Example 3 (for any platform containing v1 of the TSENS IP):
+tsens: thermal-sensor@4a9000 {
+ compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
+ nvmem-cells = <&tsens_caldata>;
+ nvmem-cell-names = "calib";
+ #qcom,sensors = <10>;
+ #thermal-sensor-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
index 43d744e5305ef3fd4f1577ec69fd8db41dc2be56..c6aac9bcacf1cd673244ba8a3d7dce8b38088889 100644
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
@@ -2,6 +2,7 @@
Required properties:
- compatible : should be "rockchip,<name>-tsadc"
+ "rockchip,px30-tsadc": found on PX30 SoCs
"rockchip,rv1108-tsadc": found on RV1108 SoCs
"rockchip,rk3228-tsadc": found on RK3228 SoCs
"rockchip,rk3288-tsadc": found on RK3288 SoCs
diff --git a/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt b/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt
index d72355502b786d02d51c2d8d21e834e2351266b3..691a09db2fefca3a13ba655fcb323d69e55c90e4 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt
@@ -8,16 +8,22 @@ temperature using voltage-temperature lookup table.
Required properties:
===================
- compatible: Must be "generic-adc-thermal".
+- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description
+ of this property.
+Optional properties:
+===================
- temperature-lookup-table: Two dimensional array of Integer; lookup table
to map the relation between ADC value and
temperature. When ADC is read, the value is
looked up on the table to get the equivalent
temperature.
+
The first value of the each row of array is the
temperature in milliCelsius and second value of
the each row of array is the ADC read value.
-- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description
- of this property.
+
+ If not specified, driver assumes the ADC channel
+ gives milliCelsius directly.
Example :
#include <dt-bindings/thermal/thermal.h>
diff --git a/MAINTAINERS b/MAINTAINERS
index ee6cf4d1010c2b989e3fb64de99a97fd898e5a4e..59efb8bd33e00fba904f8bdc61c7604aa0c1417a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -742,6 +742,12 @@ F: drivers/tty/serial/altera_jtaguart.c
F: include/linux/altera_uart.h
F: include/linux/altera_jtaguart.h
+AMAZON ANNAPURNA LABS THERMAL MMIO DRIVER
+M: Talel Shenhar <talel@amazon.com>
+S: Maintained
+F: Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt
+F: drivers/thermal/thermal_mmio.c
+
AMAZON ETHERNET DRIVERS
M: Netanel Belgazal <netanel@amazon.com>
R: Saeed Bishara <saeedb@amazon.com>
diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c
index c4dd6301e7c82e62660cc7a5bded3d30a663d0cf..0daf0b32aa4acdccdc58d152ece54dd37925ae21 100644
--- a/drivers/hwmon/aspeed-pwm-tacho.c
+++ b/drivers/hwmon/aspeed-pwm-tacho.c
@@ -830,10 +830,8 @@ static int aspeed_create_pwm_cooling(struct device *dev,
}
snprintf(cdev->name, MAX_CDEV_NAME_LEN, "%pOFn%d", child, pwm_port);
- cdev->tcdev = thermal_of_cooling_device_register(child,
- cdev->name,
- cdev,
- &aspeed_pwm_cool_ops);
+ cdev->tcdev = devm_thermal_of_cooling_device_register(dev, child,
+ cdev->name, cdev, &aspeed_pwm_cool_ops);
if (IS_ERR(cdev->tcdev))
return PTR_ERR(cdev->tcdev);
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index f1bf67aca9e8be69d2f49cc79a3cac7ef2cfc979..3f6e5b4e399736fc32a868ad66645656ecaa406b 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -498,6 +498,11 @@ static const struct of_device_id of_gpio_fan_match[] = {
};
MODULE_DEVICE_TABLE(of, of_gpio_fan_match);
+static void gpio_fan_stop(void *data)
+{
+ set_fan_speed(data, 0);
+}
+
static int gpio_fan_probe(struct platform_device *pdev)
{
int err;
@@ -532,6 +537,7 @@ static int gpio_fan_probe(struct platform_device *pdev)
err = fan_ctrl_init(fan_data);
if (err)
return err;
+ devm_add_action_or_reset(dev, gpio_fan_stop, fan_data);
}
/* Make this driver part of hwmon class. */
@@ -543,32 +549,20 @@ static int gpio_fan_probe(struct platform_device *pdev)
return PTR_ERR(fan_data->hwmon_dev);
/* Optional cooling device register for Device tree platforms */
- fan_data->cdev = thermal_of_cooling_device_register(np,
- "gpio-fan",
- fan_data,
- &gpio_fan_cool_ops);
+ fan_data->cdev = devm_thermal_of_cooling_device_register(dev, np,
+ "gpio-fan", fan_data, &gpio_fan_cool_ops);
dev_info(dev, "GPIO fan initialized\n");
return 0;
}
-static int gpio_fan_remove(struct platform_device *pdev)
+static void gpio_fan_shutdown(struct platform_device *pdev)
{
struct gpio_fan_data *fan_data = platform_get_drvdata(pdev);
- if (!IS_ERR(fan_data->cdev))
- thermal_cooling_device_unregister(fan_data->cdev);
-
if (fan_data->gpios)
set_fan_speed(fan_data, 0);
-
- return 0;
-}
-
-static void gpio_fan_shutdown(struct platform_device *pdev)
-{
- gpio_fan_remove(pdev);
}
#ifdef CONFIG_PM_SLEEP
@@ -602,7 +596,6 @@ static SIMPLE_DEV_PM_OPS(gpio_fan_pm, gpio_fan_suspend, gpio_fan_resume);
static struct platform_driver gpio_fan_driver = {
.probe = gpio_fan_probe,
- .remove = gpio_fan_remove,
.shutdown = gpio_fan_shutdown,
.driver = {
.name = "gpio-fan",
diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c
index f816d2ae1e58108ac77c0da93d8455e0411011d5..ed8d59d4eecb361c288b0926f222ec1e380634ea 100644
--- a/drivers/hwmon/mlxreg-fan.c
+++ b/drivers/hwmon/mlxreg-fan.c
@@ -465,42 +465,42 @@ static int mlxreg_fan_config(struct mlxreg_fan *fan,
static int mlxreg_fan_probe(struct platform_device *pdev)
{
struct mlxreg_core_platform_data *pdata;
+ struct device *dev = &pdev->dev;
struct mlxreg_fan *fan;
struct device *hwm;
int err;
- pdata = dev_get_platdata(&pdev->dev);
+ pdata = dev_get_platdata(dev);
if (!pdata) {
- dev_err(&pdev->dev, "Failed to get platform data.\n");
+ dev_err(dev, "Failed to get platform data.\n");
return -EINVAL;
}
- fan = devm_kzalloc(&pdev->dev, sizeof(*fan), GFP_KERNEL);
+ fan = devm_kzalloc(dev, sizeof(*fan), GFP_KERNEL);
if (!fan)
return -ENOMEM;
- fan->dev = &pdev->dev;
+ fan->dev = dev;
fan->regmap = pdata->regmap;
- platform_set_drvdata(pdev, fan);
err = mlxreg_fan_config(fan, pdata);
if (err)
return err;
- hwm = devm_hwmon_device_register_with_info(&pdev->dev, "mlxreg_fan",
+ hwm = devm_hwmon_device_register_with_info(dev, "mlxreg_fan",
fan,
&mlxreg_fan_hwmon_chip_info,
NULL);
if (IS_ERR(hwm)) {
- dev_err(&pdev->dev, "Failed to register hwmon device\n");
+ dev_err(dev, "Failed to register hwmon device\n");
return PTR_ERR(hwm);
}
if (IS_REACHABLE(CONFIG_THERMAL)) {
- fan->cdev = thermal_cooling_device_register("mlxreg_fan", fan,
- &mlxreg_fan_cooling_ops);
+ fan->cdev = devm_thermal_of_cooling_device_register(dev,
+ NULL, "mlxreg_fan", fan, &mlxreg_fan_cooling_ops);
if (IS_ERR(fan->cdev)) {
- dev_err(&pdev->dev, "Failed to register cooling device\n");
+ dev_err(dev, "Failed to register cooling device\n");
return PTR_ERR(fan->cdev);
}
}
@@ -508,22 +508,11 @@ static int mlxreg_fan_probe(struct platform_device *pdev)
return 0;
}
-static int mlxreg_fan_remove(struct platform_device *pdev)
-{
- struct mlxreg_fan *fan = platform_get_drvdata(pdev);
-
- if (IS_REACHABLE(CONFIG_THERMAL))
- thermal_cooling_device_unregister(fan->cdev);
-
- return 0;
-}
-
static struct platform_driver mlxreg_fan_driver = {
.driver = {
.name = "mlxreg-fan",
},
.probe = mlxreg_fan_probe,
- .remove = mlxreg_fan_remove,
};
module_platform_driver(mlxreg_fan_driver);
diff --git a/drivers/hwmon/npcm750-pwm-fan.c b/drivers/hwmon/npcm750-pwm-fan.c
index 1dc0cd452498de52a5465a57028289079d4f25f6..09aaefa6fdb8c192e561d720dab6cc7d65a40138 100644
--- a/drivers/hwmon/npcm750-pwm-fan.c
+++ b/drivers/hwmon/npcm750-pwm-fan.c
@@ -846,10 +846,8 @@ static int npcm7xx_create_pwm_cooling(struct device *dev,
snprintf(cdev->name, THERMAL_NAME_LENGTH, "%pOFn%d", child,
pwm_port);
- cdev->tcdev = thermal_of_cooling_device_register(child,
- cdev->name,
- cdev,
- &npcm7xx_pwm_cool_ops);
+ cdev->tcdev = devm_thermal_of_cooling_device_register(dev, child,
+ cdev->name, cdev, &npcm7xx_pwm_cool_ops);
if (IS_ERR(cdev->tcdev))
return PTR_ERR(cdev->tcdev);
diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index eead8afe6447b2b31324975f050fc0b6204a1bec..5fb2745f0226a66273d87e39e5b6303a9a994aad 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -273,27 +273,40 @@ static int pwm_fan_of_get_cooling_data(struct device *dev,
return 0;
}
+static void pwm_fan_regulator_disable(void *data)
+{
+ regulator_disable(data);
+}
+
+static void pwm_fan_pwm_disable(void *__ctx)
+{
+ struct pwm_fan_ctx *ctx = __ctx;
+ pwm_disable(ctx->pwm);
+ del_timer_sync(&ctx->rpm_timer);
+}
+
static int pwm_fan_probe(struct platform_device *pdev)
{
struct thermal_cooling_device *cdev;
+ struct device *dev = &pdev->dev;
struct pwm_fan_ctx *ctx;
struct device *hwmon;
int ret;
struct pwm_state state = { };
u32 ppr = 2;
- ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
mutex_init(&ctx->lock);
- ctx->pwm = devm_of_pwm_get(&pdev->dev, pdev->dev.of_node, NULL);
+ ctx->pwm = devm_of_pwm_get(dev, dev->of_node, NULL);
if (IS_ERR(ctx->pwm)) {
ret = PTR_ERR(ctx->pwm);
if (ret != -EPROBE_DEFER)
- dev_err(&pdev->dev, "Could not get PWM: %d\n", ret);
+ dev_err(dev, "Could not get PWM: %d\n", ret);
return ret;
}
@@ -304,7 +317,7 @@ static int pwm_fan_probe(struct platform_device *pdev)
if (ctx->irq == -EPROBE_DEFER)
return ctx->irq;
- ctx->reg_en = devm_regulator_get_optional(&pdev->dev, "fan");
+ ctx->reg_en = devm_regulator_get_optional(dev, "fan");
if (IS_ERR(ctx->reg_en)) {
if (PTR_ERR(ctx->reg_en) != -ENODEV)
return PTR_ERR(ctx->reg_en);
@@ -313,10 +326,11 @@ static int pwm_fan_probe(struct platform_device *pdev)
} else {
ret = regulator_enable(ctx->reg_en);
if (ret) {
- dev_err(&pdev->dev,
- "Failed to enable fan supply: %d\n", ret);
+ dev_err(dev, "Failed to enable fan supply: %d\n", ret);
return ret;
}
+ devm_add_action_or_reset(dev, pwm_fan_regulator_disable,
+ ctx->reg_en);
}
ctx->pwm_value = MAX_PWM;
@@ -328,91 +342,57 @@ static int pwm_fan_probe(struct platform_device *pdev)
ret = pwm_apply_state(ctx->pwm, &state);
if (ret) {
- dev_err(&pdev->dev, "Failed to configure PWM: %d\n", ret);
- goto err_reg_disable;
+ dev_err(dev, "Failed to configure PWM: %d\n", ret);
+ return ret;
}
-
timer_setup(&ctx->rpm_timer, sample_timer, 0);
+ devm_add_action_or_reset(dev, pwm_fan_pwm_disable, ctx);
- of_property_read_u32(pdev->dev.of_node, "pulses-per-revolution", &ppr);
+ of_property_read_u32(dev->of_node, "pulses-per-revolution", &ppr);
ctx->pulses_per_revolution = ppr;
if (!ctx->pulses_per_revolution) {
- dev_err(&pdev->dev, "pulses-per-revolution can't be zero.\n");
- ret = -EINVAL;
- goto err_pwm_disable;
+ dev_err(dev, "pulses-per-revolution can't be zero.\n");
+ return -EINVAL;
}
if (ctx->irq > 0) {
- ret = devm_request_irq(&pdev->dev, ctx->irq, pulse_handler, 0,
+ ret = devm_request_irq(dev, ctx->irq, pulse_handler, 0,
pdev->name, ctx);
if (ret) {
- dev_err(&pdev->dev,
- "Failed to request interrupt: %d\n", ret);
- goto err_pwm_disable;
+ dev_err(dev, "Failed to request interrupt: %d\n", ret);
+ return ret;
}
ctx->sample_start = ktime_get();
mod_timer(&ctx->rpm_timer, jiffies + HZ);
}
- hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, "pwmfan",
+ hwmon = devm_hwmon_device_register_with_groups(dev, "pwmfan",
ctx, pwm_fan_groups);
if (IS_ERR(hwmon)) {
- ret = PTR_ERR(hwmon);
- dev_err(&pdev->dev,
- "Failed to register hwmon device: %d\n", ret);
- goto err_del_timer;
+ dev_err(dev, "Failed to register hwmon device\n");
+ return PTR_ERR(hwmon);
}
- ret = pwm_fan_of_get_cooling_data(&pdev->dev, ctx);
+ ret = pwm_fan_of_get_cooling_data(dev, ctx);
if (ret)
- goto err_del_timer;
+ return ret;
ctx->pwm_fan_state = ctx->pwm_fan_max_state;
if (IS_ENABLED(CONFIG_THERMAL)) {
- cdev = thermal_of_cooling_device_register(pdev->dev.of_node,
- "pwm-fan", ctx,
- &pwm_fan_cooling_ops);
+ cdev = devm_thermal_of_cooling_device_register(dev,
+ dev->of_node, "pwm-fan", ctx, &pwm_fan_cooling_ops);
if (IS_ERR(cdev)) {
ret = PTR_ERR(cdev);
- dev_err(&pdev->dev,
+ dev_err(dev,
"Failed to register pwm-fan as cooling device: %d\n",
ret);
- goto err_del_timer;
+ return ret;
}
ctx->cdev = cdev;
thermal_cdev_update(cdev);
}
return 0;
-
-err_del_timer:
- del_timer_sync(&ctx->rpm_timer);
-
-err_pwm_disable:
- state.enabled = false;
- pwm_apply_state(ctx->pwm, &state);
-
-err_reg_disable:
- if (ctx->reg_en)
- regulator_disable(ctx->reg_en);
-
- return ret;
-}
-
-static int pwm_fan_remove(struct platform_device *pdev)
-{
- struct pwm_fan_ctx *ctx = platform_get_drvdata(pdev);
-
- thermal_cooling_device_unregister(ctx->cdev);
- del_timer_sync(&ctx->rpm_timer);
-
- if (ctx->pwm_value)
- pwm_disable(ctx->pwm);
-
- if (ctx->reg_en)
- regulator_disable(ctx->reg_en);
-
- return 0;
}
#ifdef CONFIG_PM_SLEEP
@@ -480,7 +460,6 @@ MODULE_DEVICE_TABLE(of, of_pwm_fan_match);
static struct platform_driver pwm_fan_driver = {
.probe = pwm_fan_probe,
- .remove = pwm_fan_remove,
.driver = {
.name = "pwm-fan",
.pm = &pwm_fan_pm,
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 653aa27a25a49d8b0e7f1265209579e6c25da653..66a709d5d6b92e747897f780ca09dbe626a708f1 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -200,6 +200,17 @@ config THERMAL_EMULATION
because userland can easily disable the thermal policy by simply
flooding this sysfs node with low temperature values.
+config THERMAL_MMIO
+ tristate "Generic Thermal MMIO driver"
+ depends on OF || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This option enables the generic thermal MMIO driver that will use
+ memory-mapped reads to get the temperature. Any HW/System that
+ allows temperature reading by a single memory-mapped reading, be it
+ register or shared memory, is a potential candidate to work with this
+ driver.
+
config HISI_THERMAL
tristate "Hisilicon thermal driver"
depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 486d682be0477e3052600c958de837302f243421..74a37c7f847a6f50e84de4605944c0fa16e2aebf 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -29,6 +29,7 @@ thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
# platform thermal drivers
obj-y += broadcom/
+obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.o
obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o
obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o
diff --git a/drivers/thermal/broadcom/sr-thermal.c b/drivers/thermal/broadcom/sr-thermal.c
index 2284cbecedf38595791bc5669a4d5d2faf4c2f13..475ce2900771337f5398b21f406a3c9877324222 100644
--- a/drivers/thermal/broadcom/sr-thermal.c
+++ b/drivers/thermal/broadcom/sr-thermal.c
@@ -3,7 +3,6 @@
* Copyright (C) 2018 Broadcom
*/
-#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
@@ -100,18 +99,11 @@ static const struct of_device_id sr_thermal_of_match[] = {
};
MODULE_DEVICE_TABLE(of, sr_thermal_of_match);
-static const struct acpi_device_id sr_thermal_acpi_ids[] = {
- { .id = "BRCM0500" },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(acpi, sr_thermal_acpi_ids);
-
static struct platform_driver sr_thermal_driver = {
.probe = sr_thermal_probe,
.driver = {
.name = "sr-thermal",
.of_match_table = sr_thermal_of_match,
- .acpi_match_table = ACPI_PTR(sr_thermal_acpi_ids),
},
};
module_platform_driver(sr_thermal_driver);
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index f7c1f49ec87f2a397d882ca595421e26d71df2b3..4c5db59a619b07c23aafeb50e0f5fad6aff98517 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -1,26 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* linux/drivers/thermal/cpu_cooling.c
*
* Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
- * Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org>
*
- * Copyright (C) 2014 Viresh Kumar <viresh.kumar@linaro.org>
+ * Copyright (C) 2012-2018 Linaro Limited.
*
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * Authors: Amit Daniel <amit.kachhap@linaro.org>
+ * Viresh Kumar <viresh.kumar@linaro.org>
*
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/module.h>
#include <linux/thermal.h>
@@ -99,7 +87,6 @@ struct cpufreq_cooling_device {
unsigned int clipped_freq;
unsigned int max_level;
struct freq_table *freq_table; /* In descending order */
- struct thermal_cooling_device *cdev;
struct cpufreq_policy *policy;
struct list_head node;
struct time_in_idle *idle_time;
@@ -207,8 +194,7 @@ static int update_freq_table(struct cpufreq_cooling_device *cpufreq_cdev,
dev = get_cpu_device(cpu);
if (unlikely(!dev)) {
- dev_warn(&cpufreq_cdev->cdev->device,
- "No cpu device for cpu %d\n", cpu);
+ pr_warn("No cpu device for cpu %d\n", cpu);
return -ENODEV;
}
@@ -458,7 +444,7 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev,
load = 0;
total_load += load;
- if (trace_thermal_power_cpu_limit_enabled() && load_cpu)
+ if (load_cpu)
load_cpu[i] = load;
i++;
@@ -541,7 +527,6 @@ static int cpufreq_power2state(struct thermal_cooling_device *cdev,
struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
struct cpufreq_policy *policy = cpufreq_cdev->policy;
- power = power > 0 ? power : 0;
last_load = cpufreq_cdev->last_load ?: 1;
normalised_power = (power * 100) / last_load;
target_freq = cpu_power_to_freq(cpufreq_cdev, normalised_power);
@@ -692,7 +677,6 @@ __cpufreq_cooling_register(struct device_node *np,
goto remove_ida;
cpufreq_cdev->clipped_freq = cpufreq_cdev->freq_table[0].frequency;
- cpufreq_cdev->cdev = cdev;
mutex_lock(&cooling_list_lock);
/* Register the notifier for first cpufreq cooling device */
@@ -810,7 +794,7 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
CPUFREQ_POLICY_NOTIFIER);
- thermal_cooling_device_unregister(cpufreq_cdev->cdev);
+ thermal_cooling_device_unregister(cdev);
ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id);
kfree(cpufreq_cdev->idle_time);
kfree(cpufreq_cdev->freq_table);
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index 2df059cc07e2fb76fbe2b23aa436f3878e84125a..dc5093be553ec19019162e2571adfbe8c691ddc7 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -5,6 +5,9 @@
* Copyright (C) 2013 Texas Instruments
* Copyright (C) 2013 Eduardo Valentin <eduardo.valentin@ti.com>
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/thermal.h>
#include <linux/slab.h>
#include <linux/types.h>
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index 717a08600bb5662c983bb9cc5761c3ad148b82c0..fc6fe50cdde4c1a17259558402b73c80504f54e9 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -1,3 +1,5 @@
obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
-qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o
+
+qcom_tsens-y += tsens.o tsens-common.o tsens-v0_1.o \
+ tsens-8960.o tsens-v2.o tsens-v1.o
obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o
diff --git a/drivers/thermal/qcom/tsens-8916.c b/drivers/thermal/qcom/tsens-8916.c
deleted file mode 100644
index c6dd620ac029fc788bffd4adc8622551df6977e5..0000000000000000000000000000000000000000
--- a/drivers/thermal/qcom/tsens-8916.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- */
-
-#include <linux/platform_device.h>
-#include "tsens.h"
-
-/* eeprom layout data for 8916 */
-#define BASE0_MASK 0x0000007f
-#define BASE1_MASK 0xfe000000
-#define BASE0_SHIFT 0
-#define BASE1_SHIFT 25
-
-#define S0_P1_MASK 0x00000f80
-#define S1_P1_MASK 0x003e0000
-#define S2_P1_MASK 0xf8000000
-#define S3_P1_MASK 0x000003e0
-#define S4_P1_MASK 0x000f8000
-
-#define S0_P2_MASK 0x0001f000
-#define S1_P2_MASK 0x07c00000
-#define S2_P2_MASK 0x0000001f
-#define S3_P2_MASK 0x00007c00
-#define S4_P2_MASK 0x01f00000
-
-#define S0_P1_SHIFT 7
-#define S1_P1_SHIFT 17
-#define S2_P1_SHIFT 27
-#define S3_P1_SHIFT 5
-#define S4_P1_SHIFT 15
-
-#define S0_P2_SHIFT 12
-#define S1_P2_SHIFT 22
-#define S2_P2_SHIFT 0
-#define S3_P2_SHIFT 10
-#define S4_P2_SHIFT 20
-
-#define CAL_SEL_MASK 0xe0000000
-#define CAL_SEL_SHIFT 29
-
-static int calibrate_8916(struct tsens_device *tmdev)
-{
- int base0 = 0, base1 = 0, i;
- u32 p1[5], p2[5];
- int mode = 0;
- u32 *qfprom_cdata, *qfprom_csel;
-
- qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib");
- if (IS_ERR(qfprom_cdata))
- return PTR_ERR(qfprom_cdata);
-
- qfprom_csel = (u32 *)qfprom_read(tmdev->dev, "calib_sel");
- if (IS_ERR(qfprom_csel))
- return PTR_ERR(qfprom_csel);
-
- mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
- dev_dbg(tmdev->dev, "calibration mode is %d\n", mode);
-
- switch (mode) {
- case TWO_PT_CALIB:
- base1 = (qfprom_cdata[1] & BASE1_MASK) >> BASE1_SHIFT;
- p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
- p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
- p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT;
- p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
- p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
- for (i = 0; i < tmdev->num_sensors; i++)
- p2[i] = ((base1 + p2[i]) << 3);
- /* Fall through */
- case ONE_PT_CALIB2:
- base0 = (qfprom_cdata[0] & BASE0_MASK);
- p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
- p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
- p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
- p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
- p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
- for (i = 0; i < tmdev->num_sensors; i++)
- p1[i] = (((base0) + p1[i]) << 3);
- break;
- default:
- for (i = 0; i < tmdev->num_sensors; i++) {
- p1[i] = 500;
- p2[i] = 780;
- }
- break;
- }
-
- compute_intercept_slope(tmdev, p1, p2, mode);
-
- return 0;
-}
-
-static const struct tsens_ops ops_8916 = {
- .init = init_common,
- .calibrate = calibrate_8916,
- .get_temp = get_temp_common,
-};
-
-const struct tsens_data data_8916 = {
- .num_sensors = 5,
- .ops = &ops_8916,
- .reg_offsets = { [SROT_CTRL_OFFSET] = 0x0 },
- .hw_ids = (unsigned int []){0, 1, 2, 4, 5 },
-};
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 0f0adb302a7bce8149dd973f1830c13c264a39f2..8d9b721dadb6522122891f7fbff59ea8922fe488 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -56,21 +56,21 @@
#define TRDY_MASK BIT(7)
#define TIMEOUT_US 100
-static int suspend_8960(struct tsens_device *tmdev)
+static int suspend_8960(struct tsens_priv *priv)
{
int ret;
unsigned int mask;
- struct regmap *map = tmdev->tm_map;
+ struct regmap *map = priv->tm_map;
- ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold);
+ ret = regmap_read(map, THRESHOLD_ADDR, &priv->ctx.threshold);
if (ret)
return ret;
- ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control);
+ ret = regmap_read(map, CNTL_ADDR, &priv->ctx.control);
if (ret)
return ret;
- if (tmdev->num_sensors > 1)
+ if (priv->num_sensors > 1)
mask = SLP_CLK_ENA | EN;
else
mask = SLP_CLK_ENA_8660 | EN;
@@ -82,10 +82,10 @@ static int suspend_8960(struct tsens_device *tmdev)
return 0;
}
-static int resume_8960(struct tsens_device *tmdev)
+static int resume_8960(struct tsens_priv *priv)
{
int ret;
- struct regmap *map = tmdev->tm_map;
+ struct regmap *map = priv->tm_map;
ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
if (ret)
@@ -95,80 +95,80 @@ static int resume_8960(struct tsens_device *tmdev)
* Separate CONFIG restore is not needed only for 8660 as
* config is part of CTRL Addr and its restored as such
*/
- if (tmdev->num_sensors > 1) {
+ if (priv->num_sensors > 1) {
ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
if (ret)
return ret;
}
- ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold);
+ ret = regmap_write(map, THRESHOLD_ADDR, priv->ctx.threshold);
if (ret)
return ret;
- ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control);
+ ret = regmap_write(map, CNTL_ADDR, priv->ctx.control);
if (ret)
return ret;
return 0;
}
-static int enable_8960(struct tsens_device *tmdev, int id)
+static int enable_8960(struct tsens_priv *priv, int id)
{
int ret;
u32 reg, mask;
- ret = regmap_read(tmdev->tm_map, CNTL_ADDR, ®);
+ ret = regmap_read(priv->tm_map, CNTL_ADDR, ®);
if (ret)
return ret;
mask = BIT(id + SENSOR0_SHIFT);
- ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg | SW_RST);
+ ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST);
if (ret)
return ret;
- if (tmdev->num_sensors > 1)
+ if (priv->num_sensors > 1)
reg |= mask | SLP_CLK_ENA | EN;
else
reg |= mask | SLP_CLK_ENA_8660 | EN;
- ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg);
+ ret = regmap_write(priv->tm_map, CNTL_ADDR, reg);
if (ret)
return ret;
return 0;
}
-static void disable_8960(struct tsens_device *tmdev)
+static void disable_8960(struct tsens_priv *priv)
{
int ret;
u32 reg_cntl;
u32 mask;
- mask = GENMASK(tmdev->num_sensors - 1, 0);
+ mask = GENMASK(priv->num_sensors - 1, 0);
mask <<= SENSOR0_SHIFT;
mask |= EN;
- ret = regmap_read(tmdev->tm_map, CNTL_ADDR, ®_cntl);
+ ret = regmap_read(priv->tm_map, CNTL_ADDR, ®_cntl);
if (ret)
return;
reg_cntl &= ~mask;
- if (tmdev->num_sensors > 1)
+ if (priv->num_sensors > 1)
reg_cntl &= ~SLP_CLK_ENA;
else
reg_cntl &= ~SLP_CLK_ENA_8660;
- regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl);
+ regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
}
-static int init_8960(struct tsens_device *tmdev)
+static int init_8960(struct tsens_priv *priv)
{
int ret, i;
u32 reg_cntl;
- tmdev->tm_map = dev_get_regmap(tmdev->dev, NULL);
- if (!tmdev->tm_map)
+ priv->tm_map = dev_get_regmap(priv->dev, NULL);
+ if (!priv->tm_map)
return -ENODEV;
/*
@@ -177,21 +177,21 @@ static int init_8960(struct tsens_device *tmdev)
* but the control registers stay in the same place, i.e
* directly after the first 5 status registers.
*/
- for (i = 0; i < tmdev->num_sensors; i++) {
+ for (i = 0; i < priv->num_sensors; i++) {
if (i >= 5)
- tmdev->sensor[i].status = S0_STATUS_ADDR + 40;
- tmdev->sensor[i].status += i * 4;
+ priv->sensor[i].status = S0_STATUS_ADDR + 40;
+ priv->sensor[i].status += i * 4;
}
reg_cntl = SW_RST;
- ret = regmap_update_bits(tmdev->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
+ ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
if (ret)
return ret;
- if (tmdev->num_sensors > 1) {
+ if (priv->num_sensors > 1) {
reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
reg_cntl &= ~SW_RST;
- ret = regmap_update_bits(tmdev->tm_map, CONFIG_ADDR,
+ ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
CONFIG_MASK, CONFIG);
} else {
reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
@@ -199,30 +199,30 @@ static int init_8960(struct tsens_device *tmdev)
reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
}
- reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT;
- ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl);
+ reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
+ ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
if (ret)
return ret;
reg_cntl |= EN;
- ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl);
+ ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
if (ret)
return ret;
return 0;
}
-static int calibrate_8960(struct tsens_device *tmdev)
+static int calibrate_8960(struct tsens_priv *priv)
{
int i;
char *data;
- ssize_t num_read = tmdev->num_sensors;
- struct tsens_sensor *s = tmdev->sensor;
+ ssize_t num_read = priv->num_sensors;
+ struct tsens_sensor *s = priv->sensor;
- data = qfprom_read(tmdev->dev, "calib");
+ data = qfprom_read(priv->dev, "calib");
if (IS_ERR(data))
- data = qfprom_read(tmdev->dev, "calib_backup");
+ data = qfprom_read(priv->dev, "calib_backup");
if (IS_ERR(data))
return PTR_ERR(data);
@@ -243,21 +243,21 @@ static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
return adc_code * slope + offset;
}
-static int get_temp_8960(struct tsens_device *tmdev, int id, int *temp)
+static int get_temp_8960(struct tsens_priv *priv, int id, int *temp)
{
int ret;
u32 code, trdy;
- const struct tsens_sensor *s = &tmdev->sensor[id];
+ const struct tsens_sensor *s = &priv->sensor[id];
unsigned long timeout;
timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
do {
- ret = regmap_read(tmdev->tm_map, INT_STATUS_ADDR, &trdy);
+ ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
if (ret)
return ret;
if (!(trdy & TRDY_MASK))
continue;
- ret = regmap_read(tmdev->tm_map, s->status, &code);
+ ret = regmap_read(priv->tm_map, s->status, &code);
if (ret)
return ret;
*temp = code_to_mdegC(code, s);
@@ -277,7 +277,7 @@ static const struct tsens_ops ops_8960 = {
.resume = resume_8960,
};
-const struct tsens_data data_8960 = {
+const struct tsens_plat_data data_8960 = {
.num_sensors = 11,
.ops = &ops_8960,
};
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index f80c73f117406b587e9b2a5c38bd7e337eca2b9b..928e8e81ba6970cd20e710df70f7080a0a4ead3c 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -12,18 +12,6 @@
#include <linux/regmap.h>
#include "tsens.h"
-/* SROT */
-#define TSENS_EN BIT(0)
-
-/* TM */
-#define STATUS_OFFSET 0x30
-#define SN_ADDR_OFFSET 0x4
-#define SN_ST_TEMP_MASK 0x3ff
-#define CAL_DEGC_PT1 30
-#define CAL_DEGC_PT2 120
-#define SLOPE_FACTOR 1000
-#define SLOPE_DEFAULT 3200
-
char *qfprom_read(struct device *dev, const char *cname)
{
struct nvmem_cell *cell;
@@ -46,18 +34,18 @@ char *qfprom_read(struct device *dev, const char *cname)
* and offset values are derived from tz->tzp->slope and tz->tzp->offset
* resp.
*/
-void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1,
+void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
u32 *p2, u32 mode)
{
int i;
int num, den;
- for (i = 0; i < tmdev->num_sensors; i++) {
- dev_dbg(tmdev->dev,
+ for (i = 0; i < priv->num_sensors; i++) {
+ dev_dbg(priv->dev,
"sensor%d - data_point1:%#x data_point2:%#x\n",
i, p1[i], p2[i]);
- tmdev->sensor[i].slope = SLOPE_DEFAULT;
+ priv->sensor[i].slope = SLOPE_DEFAULT;
if (mode == TWO_PT_CALIB) {
/*
* slope (m) = adc_code2 - adc_code1 (y2 - y1)/
@@ -66,16 +54,30 @@ void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1,
num = p2[i] - p1[i];
num *= SLOPE_FACTOR;
den = CAL_DEGC_PT2 - CAL_DEGC_PT1;
- tmdev->sensor[i].slope = num / den;
+ priv->sensor[i].slope = num / den;
}
- tmdev->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
+ priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
(CAL_DEGC_PT1 *
- tmdev->sensor[i].slope);
- dev_dbg(tmdev->dev, "offset:%d\n", tmdev->sensor[i].offset);
+ priv->sensor[i].slope);
+ dev_dbg(priv->dev, "offset:%d\n", priv->sensor[i].offset);
}
}
+bool is_sensor_enabled(struct tsens_priv *priv, u32 hw_id)
+{
+ u32 val;
+ int ret;
+
+ if ((hw_id > (priv->num_sensors - 1)) || (hw_id < 0))
+ return -EINVAL;
+ ret = regmap_field_read(priv->rf[SENSOR_EN], &val);
+ if (ret)
+ return ret;
+
+ return val & (1 << hw_id);
+}
+
static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
{
int degc, num, den;
@@ -95,18 +97,54 @@ static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
return degc;
}
-int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
+int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp)
{
- struct tsens_sensor *s = &tmdev->sensor[id];
- u32 code;
- unsigned int status_reg;
+ struct tsens_sensor *s = &priv->sensor[i];
+ u32 temp_idx = LAST_TEMP_0 + s->hw_id;
+ u32 valid_idx = VALID_0 + s->hw_id;
+ u32 last_temp = 0, valid, mask;
+ int ret;
+
+ ret = regmap_field_read(priv->rf[valid_idx], &valid);
+ if (ret)
+ return ret;
+ while (!valid) {
+ /* Valid bit is 0 for 6 AHB clock cycles.
+ * At 19.2MHz, 1 AHB clock is ~60ns.
+ * We should enter this loop very, very rarely.
+ */
+ ndelay(400);
+ ret = regmap_field_read(priv->rf[valid_idx], &valid);
+ if (ret)
+ return ret;
+ }
+
+ /* Valid bit is set, OK to read the temperature */
+ ret = regmap_field_read(priv->rf[temp_idx], &last_temp);
+ if (ret)
+ return ret;
+
+ if (priv->feat->adc) {
+ /* Convert temperature from ADC code to milliCelsius */
+ *temp = code_to_degc(last_temp, s) * 1000;
+ } else {
+ mask = GENMASK(priv->fields[LAST_TEMP_0].msb,
+ priv->fields[LAST_TEMP_0].lsb);
+ /* Convert temperature from deciCelsius to milliCelsius */
+ *temp = sign_extend32(last_temp, fls(mask) - 1) * 100;
+ }
+
+ return 0;
+}
+
+int get_temp_common(struct tsens_priv *priv, int i, int *temp)
+{
+ struct tsens_sensor *s = &priv->sensor[i];
int last_temp = 0, ret;
- status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * SN_ADDR_OFFSET;
- ret = regmap_read(tmdev->tm_map, status_reg, &code);
+ ret = regmap_field_read(priv->rf[LAST_TEMP_0 + s->hw_id], &last_temp);
if (ret)
return ret;
- last_temp = code & SN_ST_TEMP_MASK;
*temp = code_to_degc(last_temp, s) * 1000;
@@ -127,21 +165,21 @@ static const struct regmap_config tsens_srot_config = {
.reg_stride = 4,
};
-int __init init_common(struct tsens_device *tmdev)
+int __init init_common(struct tsens_priv *priv)
{
void __iomem *tm_base, *srot_base;
+ struct device *dev = priv->dev;
struct resource *res;
- u32 code;
- int ret;
- struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node);
- u16 ctrl_offset = tmdev->reg_offsets[SROT_CTRL_OFFSET];
+ u32 enabled;
+ int ret, i, j;
+ struct platform_device *op = of_find_device_by_node(priv->dev->of_node);
if (!op)
return -EINVAL;
if (op->num_resources > 1) {
/* DT with separate SROT and TM address space */
- tmdev->tm_offset = 0;
+ priv->tm_offset = 0;
res = platform_get_resource(op, IORESOURCE_MEM, 1);
srot_base = devm_ioremap_resource(&op->dev, res);
if (IS_ERR(srot_base)) {
@@ -149,16 +187,15 @@ int __init init_common(struct tsens_device *tmdev)
goto err_put_device;
}
- tmdev->srot_map = devm_regmap_init_mmio(tmdev->dev, srot_base,
+ priv->srot_map = devm_regmap_init_mmio(dev, srot_base,
&tsens_srot_config);
- if (IS_ERR(tmdev->srot_map)) {
- ret = PTR_ERR(tmdev->srot_map);
+ if (IS_ERR(priv->srot_map)) {
+ ret = PTR_ERR(priv->srot_map);
goto err_put_device;
}
-
} else {
/* old DTs where SROT and TM were in a contiguous 2K block */
- tmdev->tm_offset = 0x1000;
+ priv->tm_offset = 0x1000;
}
res = platform_get_resource(op, IORESOURCE_MEM, 0);
@@ -168,19 +205,47 @@ int __init init_common(struct tsens_device *tmdev)
goto err_put_device;
}
- tmdev->tm_map = devm_regmap_init_mmio(tmdev->dev, tm_base, &tsens_config);
- if (IS_ERR(tmdev->tm_map)) {
- ret = PTR_ERR(tmdev->tm_map);
+ priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
+ if (IS_ERR(priv->tm_map)) {
+ ret = PTR_ERR(priv->tm_map);
goto err_put_device;
}
- if (tmdev->srot_map) {
- ret = regmap_read(tmdev->srot_map, ctrl_offset, &code);
- if (ret)
+ priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
+ priv->fields[TSENS_EN]);
+ if (IS_ERR(priv->rf[TSENS_EN])) {
+ ret = PTR_ERR(priv->rf[TSENS_EN]);
+ goto err_put_device;
+ }
+ ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
+ if (ret)
+ goto err_put_device;
+ if (!enabled) {
+ dev_err(dev, "tsens device is not enabled\n");
+ ret = -ENODEV;
+ goto err_put_device;
+ }
+
+ priv->rf[SENSOR_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
+ priv->fields[SENSOR_EN]);
+ if (IS_ERR(priv->rf[SENSOR_EN])) {
+ ret = PTR_ERR(priv->rf[SENSOR_EN]);
+ goto err_put_device;
+ }
+ /* now alloc regmap_fields in tm_map */
+ for (i = 0, j = LAST_TEMP_0; i < priv->feat->max_sensors; i++, j++) {
+ priv->rf[j] = devm_regmap_field_alloc(dev, priv->tm_map,
+ priv->fields[j]);
+ if (IS_ERR(priv->rf[j])) {
+ ret = PTR_ERR(priv->rf[j]);
goto err_put_device;
- if (!(code & TSENS_EN)) {
- dev_err(tmdev->dev, "tsens device is not enabled\n");
- ret = -ENODEV;
+ }
+ }
+ for (i = 0, j = VALID_0; i < priv->feat->max_sensors; i++, j++) {
+ priv->rf[j] = devm_regmap_field_alloc(dev, priv->tm_map,
+ priv->fields[j]);
+ if (IS_ERR(priv->rf[j])) {
+ ret = PTR_ERR(priv->rf[j]);
goto err_put_device;
}
}
diff --git a/drivers/thermal/qcom/tsens-8974.c b/drivers/thermal/qcom/tsens-v0_1.c
similarity index 56%
rename from drivers/thermal/qcom/tsens-8974.c
rename to drivers/thermal/qcom/tsens-v0_1.c
index 3d3fda3d731b30dd48f5ffaaee23fe87d185b0df..a319283c223f270181600f8f16581b38fcffce4d 100644
--- a/drivers/thermal/qcom/tsens-8974.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -6,6 +6,48 @@
#include <linux/platform_device.h>
#include "tsens.h"
+/* ----- SROT ------ */
+#define SROT_CTRL_OFF 0x0000
+
+/* ----- TM ------ */
+#define TM_INT_EN_OFF 0x0000
+#define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF 0x0004
+#define TM_Sn_STATUS_OFF 0x0030
+#define TM_TRDY_OFF 0x005c
+
+/* eeprom layout data for 8916 */
+#define MSM8916_BASE0_MASK 0x0000007f
+#define MSM8916_BASE1_MASK 0xfe000000
+#define MSM8916_BASE0_SHIFT 0
+#define MSM8916_BASE1_SHIFT 25
+
+#define MSM8916_S0_P1_MASK 0x00000f80
+#define MSM8916_S1_P1_MASK 0x003e0000
+#define MSM8916_S2_P1_MASK 0xf8000000
+#define MSM8916_S3_P1_MASK 0x000003e0
+#define MSM8916_S4_P1_MASK 0x000f8000
+
+#define MSM8916_S0_P2_MASK 0x0001f000
+#define MSM8916_S1_P2_MASK 0x07c00000
+#define MSM8916_S2_P2_MASK 0x0000001f
+#define MSM8916_S3_P2_MASK 0x00007c00
+#define MSM8916_S4_P2_MASK 0x01f00000
+
+#define MSM8916_S0_P1_SHIFT 7
+#define MSM8916_S1_P1_SHIFT 17
+#define MSM8916_S2_P1_SHIFT 27
+#define MSM8916_S3_P1_SHIFT 5
+#define MSM8916_S4_P1_SHIFT 15
+
+#define MSM8916_S0_P2_SHIFT 12
+#define MSM8916_S1_P2_SHIFT 22
+#define MSM8916_S2_P2_SHIFT 0
+#define MSM8916_S3_P2_SHIFT 10
+#define MSM8916_S4_P2_SHIFT 20
+
+#define MSM8916_CAL_SEL_MASK 0xe0000000
+#define MSM8916_CAL_SEL_SHIFT 29
+
/* eeprom layout data for 8974 */
#define BASE1_MASK 0xff
#define S0_P1_MASK 0x3f00
@@ -91,7 +133,59 @@
#define BIT_APPEND 0x3
-static int calibrate_8974(struct tsens_device *tmdev)
+static int calibrate_8916(struct tsens_priv *priv)
+{
+ int base0 = 0, base1 = 0, i;
+ u32 p1[5], p2[5];
+ int mode = 0;
+ u32 *qfprom_cdata, *qfprom_csel;
+
+ qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
+ if (IS_ERR(qfprom_cdata))
+ return PTR_ERR(qfprom_cdata);
+
+ qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel");
+ if (IS_ERR(qfprom_csel))
+ return PTR_ERR(qfprom_csel);
+
+ mode = (qfprom_csel[0] & MSM8916_CAL_SEL_MASK) >> MSM8916_CAL_SEL_SHIFT;
+ dev_dbg(priv->dev, "calibration mode is %d\n", mode);
+
+ switch (mode) {
+ case TWO_PT_CALIB:
+ base1 = (qfprom_cdata[1] & MSM8916_BASE1_MASK) >> MSM8916_BASE1_SHIFT;
+ p2[0] = (qfprom_cdata[0] & MSM8916_S0_P2_MASK) >> MSM8916_S0_P2_SHIFT;
+ p2[1] = (qfprom_cdata[0] & MSM8916_S1_P2_MASK) >> MSM8916_S1_P2_SHIFT;
+ p2[2] = (qfprom_cdata[1] & MSM8916_S2_P2_MASK) >> MSM8916_S2_P2_SHIFT;
+ p2[3] = (qfprom_cdata[1] & MSM8916_S3_P2_MASK) >> MSM8916_S3_P2_SHIFT;
+ p2[4] = (qfprom_cdata[1] & MSM8916_S4_P2_MASK) >> MSM8916_S4_P2_SHIFT;
+ for (i = 0; i < priv->num_sensors; i++)
+ p2[i] = ((base1 + p2[i]) << 3);
+ /* Fall through */
+ case ONE_PT_CALIB2:
+ base0 = (qfprom_cdata[0] & MSM8916_BASE0_MASK);
+ p1[0] = (qfprom_cdata[0] & MSM8916_S0_P1_MASK) >> MSM8916_S0_P1_SHIFT;
+ p1[1] = (qfprom_cdata[0] & MSM8916_S1_P1_MASK) >> MSM8916_S1_P1_SHIFT;
+ p1[2] = (qfprom_cdata[0] & MSM8916_S2_P1_MASK) >> MSM8916_S2_P1_SHIFT;
+ p1[3] = (qfprom_cdata[1] & MSM8916_S3_P1_MASK) >> MSM8916_S3_P1_SHIFT;
+ p1[4] = (qfprom_cdata[1] & MSM8916_S4_P1_MASK) >> MSM8916_S4_P1_SHIFT;
+ for (i = 0; i < priv->num_sensors; i++)
+ p1[i] = (((base0) + p1[i]) << 3);
+ break;
+ default:
+ for (i = 0; i < priv->num_sensors; i++) {
+ p1[i] = 500;
+ p2[i] = 780;
+ }
+ break;
+ }
+
+ compute_intercept_slope(priv, p1, p2, mode);
+
+ return 0;
+}
+
+static int calibrate_8974(struct tsens_priv *priv)
{
int base1 = 0, base2 = 0, i;
u32 p1[11], p2[11];
@@ -99,11 +193,11 @@ static int calibrate_8974(struct tsens_device *tmdev)
u32 *calib, *bkp;
u32 calib_redun_sel;
- calib = (u32 *)qfprom_read(tmdev->dev, "calib");
+ calib = (u32 *)qfprom_read(priv->dev, "calib");
if (IS_ERR(calib))
return PTR_ERR(calib);
- bkp = (u32 *)qfprom_read(tmdev->dev, "calib_backup");
+ bkp = (u32 *)qfprom_read(priv->dev, "calib_backup");
if (IS_ERR(bkp))
return PTR_ERR(bkp);
@@ -184,25 +278,25 @@ static int calibrate_8974(struct tsens_device *tmdev)
switch (mode) {
case ONE_PT_CALIB:
- for (i = 0; i < tmdev->num_sensors; i++)
+ for (i = 0; i < priv->num_sensors; i++)
p1[i] += (base1 << 2) | BIT_APPEND;
break;
case TWO_PT_CALIB:
- for (i = 0; i < tmdev->num_sensors; i++) {
+ for (i = 0; i < priv->num_sensors; i++) {
p2[i] += base2;
p2[i] <<= 2;
p2[i] |= BIT_APPEND;
}
/* Fall through */
case ONE_PT_CALIB2:
- for (i = 0; i < tmdev->num_sensors; i++) {
+ for (i = 0; i < priv->num_sensors; i++) {
p1[i] += base1;
p1[i] <<= 2;
p1[i] |= BIT_APPEND;
}
break;
default:
- for (i = 0; i < tmdev->num_sensors; i++)
+ for (i = 0; i < priv->num_sensors; i++)
p2[i] = 780;
p1[0] = 502;
p1[1] = 509;
@@ -218,19 +312,71 @@ static int calibrate_8974(struct tsens_device *tmdev)
break;
}
- compute_intercept_slope(tmdev, p1, p2, mode);
+ compute_intercept_slope(priv, p1, p2, mode);
return 0;
}
+/* v0.1: 8916, 8974 */
+
+static const struct tsens_features tsens_v0_1_feat = {
+ .ver_major = VER_0_1,
+ .crit_int = 0,
+ .adc = 1,
+ .srot_split = 1,
+ .max_sensors = 11,
+};
+
+static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = {
+ /* ----- SROT ------ */
+ /* No VERSION information */
+
+ /* CTRL_OFFSET */
+ [TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0),
+ [TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1),
+ [SENSOR_EN] = REG_FIELD(SROT_CTRL_OFF, 3, 13),
+
+ /* ----- TM ------ */
+ /* INTERRUPT ENABLE */
+ [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0),
+
+ /* Sn_STATUS */
+ REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 9),
+ /* No VALID field on v0.1 */
+ REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS, TM_Sn_STATUS_OFF, 10, 10),
+ REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11),
+ REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12),
+ /* No CRITICAL field on v0.1 */
+ REG_FIELD_FOR_EACH_SENSOR11(MAX_STATUS, TM_Sn_STATUS_OFF, 13, 13),
+
+ /* TRDY: 1=ready, 0=in progress */
+ [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
+};
+
+static const struct tsens_ops ops_8916 = {
+ .init = init_common,
+ .calibrate = calibrate_8916,
+ .get_temp = get_temp_common,
+};
+
+const struct tsens_plat_data data_8916 = {
+ .num_sensors = 5,
+ .ops = &ops_8916,
+ .hw_ids = (unsigned int []){0, 1, 2, 4, 5 },
+
+ .feat = &tsens_v0_1_feat,
+ .fields = tsens_v0_1_regfields,
+};
+
static const struct tsens_ops ops_8974 = {
.init = init_common,
.calibrate = calibrate_8974,
.get_temp = get_temp_common,
};
-const struct tsens_data data_8974 = {
+const struct tsens_plat_data data_8974 = {
.num_sensors = 11,
.ops = &ops_8974,
- .reg_offsets = { [SROT_CTRL_OFFSET] = 0x0 },
+ .feat = &tsens_v0_1_feat,
+ .fields = tsens_v0_1_regfields,
};
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
new file mode 100644
index 0000000000000000000000000000000000000000..10b595d4f619982b1b5ef6b23e4cf26b302cbae5
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include "tsens.h"
+
+/* ----- SROT ------ */
+#define SROT_HW_VER_OFF 0x0000
+#define SROT_CTRL_OFF 0x0004
+
+/* ----- TM ------ */
+#define TM_INT_EN_OFF 0x0000
+#define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF 0x0004
+#define TM_Sn_STATUS_OFF 0x0044
+#define TM_TRDY_OFF 0x0084
+
+/* eeprom layout data for qcs404/405 (v1) */
+#define BASE0_MASK 0x000007f8
+#define BASE1_MASK 0x0007f800
+#define BASE0_SHIFT 3
+#define BASE1_SHIFT 11
+
+#define S0_P1_MASK 0x0000003f
+#define S1_P1_MASK 0x0003f000
+#define S2_P1_MASK 0x3f000000
+#define S3_P1_MASK 0x000003f0
+#define S4_P1_MASK 0x003f0000
+#define S5_P1_MASK 0x0000003f
+#define S6_P1_MASK 0x0003f000
+#define S7_P1_MASK 0x3f000000
+#define S8_P1_MASK 0x000003f0
+#define S9_P1_MASK 0x003f0000
+
+#define S0_P2_MASK 0x00000fc0
+#define S1_P2_MASK 0x00fc0000
+#define S2_P2_MASK_1_0 0xc0000000
+#define S2_P2_MASK_5_2 0x0000000f
+#define S3_P2_MASK 0x0000fc00
+#define S4_P2_MASK 0x0fc00000
+#define S5_P2_MASK 0x00000fc0
+#define S6_P2_MASK 0x00fc0000
+#define S7_P2_MASK_1_0 0xc0000000
+#define S7_P2_MASK_5_2 0x0000000f
+#define S8_P2_MASK 0x0000fc00
+#define S9_P2_MASK 0x0fc00000
+
+#define S0_P1_SHIFT 0
+#define S0_P2_SHIFT 6
+#define S1_P1_SHIFT 12
+#define S1_P2_SHIFT 18
+#define S2_P1_SHIFT 24
+#define S2_P2_SHIFT_1_0 30
+
+#define S2_P2_SHIFT_5_2 0
+#define S3_P1_SHIFT 4
+#define S3_P2_SHIFT 10
+#define S4_P1_SHIFT 16
+#define S4_P2_SHIFT 22
+
+#define S5_P1_SHIFT 0
+#define S5_P2_SHIFT 6
+#define S6_P1_SHIFT 12
+#define S6_P2_SHIFT 18
+#define S7_P1_SHIFT 24
+#define S7_P2_SHIFT_1_0 30
+
+#define S7_P2_SHIFT_5_2 0
+#define S8_P1_SHIFT 4
+#define S8_P2_SHIFT 10
+#define S9_P1_SHIFT 16
+#define S9_P2_SHIFT 22
+
+#define CAL_SEL_MASK 7
+#define CAL_SEL_SHIFT 0
+
+static int calibrate_v1(struct tsens_priv *priv)
+{
+ u32 base0 = 0, base1 = 0;
+ u32 p1[10], p2[10];
+ u32 mode = 0, lsb = 0, msb = 0;
+ u32 *qfprom_cdata;
+ int i;
+
+ qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
+ if (IS_ERR(qfprom_cdata))
+ return PTR_ERR(qfprom_cdata);
+
+ mode = (qfprom_cdata[4] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
+ dev_dbg(priv->dev, "calibration mode is %d\n", mode);
+
+ switch (mode) {
+ case TWO_PT_CALIB:
+ base1 = (qfprom_cdata[4] & BASE1_MASK) >> BASE1_SHIFT;
+ p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
+ p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
+ /* This value is split over two registers, 2 bits and 4 bits */
+ lsb = (qfprom_cdata[0] & S2_P2_MASK_1_0) >> S2_P2_SHIFT_1_0;
+ msb = (qfprom_cdata[1] & S2_P2_MASK_5_2) >> S2_P2_SHIFT_5_2;
+ p2[2] = msb << 2 | lsb;
+ p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
+ p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
+ p2[5] = (qfprom_cdata[2] & S5_P2_MASK) >> S5_P2_SHIFT;
+ p2[6] = (qfprom_cdata[2] & S6_P2_MASK) >> S6_P2_SHIFT;
+ /* This value is split over two registers, 2 bits and 4 bits */
+ lsb = (qfprom_cdata[2] & S7_P2_MASK_1_0) >> S7_P2_SHIFT_1_0;
+ msb = (qfprom_cdata[3] & S7_P2_MASK_5_2) >> S7_P2_SHIFT_5_2;
+ p2[7] = msb << 2 | lsb;
+ p2[8] = (qfprom_cdata[3] & S8_P2_MASK) >> S8_P2_SHIFT;
+ p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT;
+ for (i = 0; i < priv->num_sensors; i++)
+ p2[i] = ((base1 + p2[i]) << 2);
+ /* Fall through */
+ case ONE_PT_CALIB2:
+ base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT;
+ p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+ p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+ p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+ p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
+ p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
+ p1[5] = (qfprom_cdata[2] & S5_P1_MASK) >> S5_P1_SHIFT;
+ p1[6] = (qfprom_cdata[2] & S6_P1_MASK) >> S6_P1_SHIFT;
+ p1[7] = (qfprom_cdata[2] & S7_P1_MASK) >> S7_P1_SHIFT;
+ p1[8] = (qfprom_cdata[3] & S8_P1_MASK) >> S8_P1_SHIFT;
+ p1[9] = (qfprom_cdata[3] & S9_P1_MASK) >> S9_P1_SHIFT;
+ for (i = 0; i < priv->num_sensors; i++)
+ p1[i] = (((base0) + p1[i]) << 2);
+ break;
+ default:
+ for (i = 0; i < priv->num_sensors; i++) {
+ p1[i] = 500;
+ p2[i] = 780;
+ }
+ break;
+ }
+
+ compute_intercept_slope(priv, p1, p2, mode);
+
+ return 0;
+}
+
+/* v1.x: qcs404,405 */
+
+static const struct tsens_features tsens_v1_feat = {
+ .ver_major = VER_1_X,
+ .crit_int = 0,
+ .adc = 1,
+ .srot_split = 1,
+ .max_sensors = 11,
+};
+
+static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
+ /* ----- SROT ------ */
+ /* VERSION */
+ [VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31),
+ [VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27),
+ [VER_STEP] = REG_FIELD(SROT_HW_VER_OFF, 0, 15),
+ /* CTRL_OFFSET */
+ [TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0),
+ [TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1),
+ [SENSOR_EN] = REG_FIELD(SROT_CTRL_OFF, 3, 13),
+
+ /* ----- TM ------ */
+ /* INTERRUPT ENABLE */
+ [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0),
+
+ /* Sn_STATUS */
+ REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 9),
+ REG_FIELD_FOR_EACH_SENSOR11(VALID, TM_Sn_STATUS_OFF, 14, 14),
+ REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS, TM_Sn_STATUS_OFF, 10, 10),
+ REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11),
+ REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12),
+ /* No CRITICAL field on v1.x */
+ REG_FIELD_FOR_EACH_SENSOR11(MAX_STATUS, TM_Sn_STATUS_OFF, 13, 13),
+
+ /* TRDY: 1=ready, 0=in progress */
+ [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
+};
+
+static const struct tsens_ops ops_generic_v1 = {
+ .init = init_common,
+ .calibrate = calibrate_v1,
+ .get_temp = get_temp_tsens_valid,
+};
+
+const struct tsens_plat_data data_tsens_v1 = {
+ .ops = &ops_generic_v1,
+ .feat = &tsens_v1_feat,
+ .fields = tsens_v1_regfields,
+};
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index 381a212872bfb4151b3606bea23d821403997741..1099069f2aa3efe87e0ab5cea51a8aa9a66b1079 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -4,76 +4,81 @@
* Copyright (c) 2018, Linaro Limited
*/
-#include <linux/regmap.h>
#include <linux/bitops.h>
+#include <linux/regmap.h>
#include "tsens.h"
-#define STATUS_OFFSET 0xa0
-#define LAST_TEMP_MASK 0xfff
-#define STATUS_VALID_BIT BIT(21)
+/* ----- SROT ------ */
+#define SROT_HW_VER_OFF 0x0000
+#define SROT_CTRL_OFF 0x0004
+
+/* ----- TM ------ */
+#define TM_INT_EN_OFF 0x0004
+#define TM_UPPER_LOWER_INT_STATUS_OFF 0x0008
+#define TM_UPPER_LOWER_INT_CLEAR_OFF 0x000c
+#define TM_UPPER_LOWER_INT_MASK_OFF 0x0010
+#define TM_CRITICAL_INT_STATUS_OFF 0x0014
+#define TM_CRITICAL_INT_CLEAR_OFF 0x0018
+#define TM_CRITICAL_INT_MASK_OFF 0x001c
+#define TM_Sn_UPPER_LOWER_THRESHOLD_OFF 0x0020
+#define TM_Sn_CRITICAL_THRESHOLD_OFF 0x0060
+#define TM_Sn_STATUS_OFF 0x00a0
+#define TM_TRDY_OFF 0x00e4
-static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
-{
- struct tsens_sensor *s = &tmdev->sensor[id];
- u32 code;
- unsigned int status_reg;
- u32 last_temp = 0, last_temp2 = 0, last_temp3 = 0;
- int ret;
+/* v2.x: 8996, 8998, sdm845 */
- status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4;
- ret = regmap_read(tmdev->tm_map, status_reg, &code);
- if (ret)
- return ret;
- last_temp = code & LAST_TEMP_MASK;
- if (code & STATUS_VALID_BIT)
- goto done;
+static const struct tsens_features tsens_v2_feat = {
+ .ver_major = VER_2_X,
+ .crit_int = 1,
+ .adc = 0,
+ .srot_split = 1,
+ .max_sensors = 16,
+};
- /* Try a second time */
- ret = regmap_read(tmdev->tm_map, status_reg, &code);
- if (ret)
- return ret;
- if (code & STATUS_VALID_BIT) {
- last_temp = code & LAST_TEMP_MASK;
- goto done;
- } else {
- last_temp2 = code & LAST_TEMP_MASK;
- }
+static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
+ /* ----- SROT ------ */
+ /* VERSION */
+ [VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31),
+ [VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27),
+ [VER_STEP] = REG_FIELD(SROT_HW_VER_OFF, 0, 15),
+ /* CTRL_OFF */
+ [TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0),
+ [TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1),
+ [SENSOR_EN] = REG_FIELD(SROT_CTRL_OFF, 3, 18),
- /* Try a third/last time */
- ret = regmap_read(tmdev->tm_map, status_reg, &code);
- if (ret)
- return ret;
- if (code & STATUS_VALID_BIT) {
- last_temp = code & LAST_TEMP_MASK;
- goto done;
- } else {
- last_temp3 = code & LAST_TEMP_MASK;
- }
+ /* ----- TM ------ */
+ /* INTERRUPT ENABLE */
+ /* v2 has separate enables for UPPER/LOWER/CRITICAL interrupts */
+ [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 2),
- if (last_temp == last_temp2)
- last_temp = last_temp2;
- else if (last_temp2 == last_temp3)
- last_temp = last_temp3;
-done:
- /* Convert temperature from deciCelsius to milliCelsius */
- *temp = sign_extend32(last_temp, fls(LAST_TEMP_MASK) - 1) * 100;
+ /* Sn_STATUS */
+ REG_FIELD_FOR_EACH_SENSOR16(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 11),
+ REG_FIELD_FOR_EACH_SENSOR16(VALID, TM_Sn_STATUS_OFF, 21, 21),
+ REG_FIELD_FOR_EACH_SENSOR16(MIN_STATUS, TM_Sn_STATUS_OFF, 16, 16),
+ REG_FIELD_FOR_EACH_SENSOR16(LOWER_STATUS, TM_Sn_STATUS_OFF, 17, 17),
+ REG_FIELD_FOR_EACH_SENSOR16(UPPER_STATUS, TM_Sn_STATUS_OFF, 18, 18),
+ REG_FIELD_FOR_EACH_SENSOR16(CRITICAL_STATUS, TM_Sn_STATUS_OFF, 19, 19),
+ REG_FIELD_FOR_EACH_SENSOR16(MAX_STATUS, TM_Sn_STATUS_OFF, 20, 20),
- return 0;
-}
+ /* TRDY: 1=ready, 0=in progress */
+ [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
+};
static const struct tsens_ops ops_generic_v2 = {
.init = init_common,
- .get_temp = get_temp_tsens_v2,
+ .get_temp = get_temp_tsens_valid,
};
-const struct tsens_data data_tsens_v2 = {
- .ops = &ops_generic_v2,
- .reg_offsets = { [SROT_CTRL_OFFSET] = 0x4 },
+const struct tsens_plat_data data_tsens_v2 = {
+ .ops = &ops_generic_v2,
+ .feat = &tsens_v2_feat,
+ .fields = tsens_v2_regfields,
};
/* Kept around for backward compatibility with old msm8996.dtsi */
-const struct tsens_data data_8996 = {
+const struct tsens_plat_data data_8996 = {
.num_sensors = 13,
.ops = &ops_generic_v2,
- .reg_offsets = { [SROT_CTRL_OFFSET] = 0x4 },
+ .feat = &tsens_v2_feat,
+ .fields = tsens_v2_regfields,
};
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index f1ec9bbe4717e6f0f5c3aea4fb19b5963a189d19..36b0b52db524cb78114b912b7e6d0b8514844592 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -15,38 +15,38 @@
static int tsens_get_temp(void *data, int *temp)
{
const struct tsens_sensor *s = data;
- struct tsens_device *tmdev = s->tmdev;
+ struct tsens_priv *priv = s->priv;
- return tmdev->ops->get_temp(tmdev, s->id, temp);
+ return priv->ops->get_temp(priv, s->id, temp);
}
-static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
+static int tsens_get_trend(void *data, int trip, enum thermal_trend *trend)
{
- const struct tsens_sensor *s = p;
- struct tsens_device *tmdev = s->tmdev;
+ const struct tsens_sensor *s = data;
+ struct tsens_priv *priv = s->priv;
- if (tmdev->ops->get_trend)
- return tmdev->ops->get_trend(tmdev, s->id, trend);
+ if (priv->ops->get_trend)
+ return priv->ops->get_trend(priv, s->id, trend);
return -ENOTSUPP;
}
static int __maybe_unused tsens_suspend(struct device *dev)
{
- struct tsens_device *tmdev = dev_get_drvdata(dev);
+ struct tsens_priv *priv = dev_get_drvdata(dev);
- if (tmdev->ops && tmdev->ops->suspend)
- return tmdev->ops->suspend(tmdev);
+ if (priv->ops && priv->ops->suspend)
+ return priv->ops->suspend(priv);
return 0;
}
static int __maybe_unused tsens_resume(struct device *dev)
{
- struct tsens_device *tmdev = dev_get_drvdata(dev);
+ struct tsens_priv *priv = dev_get_drvdata(dev);
- if (tmdev->ops && tmdev->ops->resume)
- return tmdev->ops->resume(tmdev);
+ if (priv->ops && priv->ops->resume)
+ return priv->ops->resume(priv);
return 0;
}
@@ -63,6 +63,9 @@ static const struct of_device_id tsens_table[] = {
}, {
.compatible = "qcom,msm8996-tsens",
.data = &data_8996,
+ }, {
+ .compatible = "qcom,tsens-v1",
+ .data = &data_tsens_v1,
}, {
.compatible = "qcom,tsens-v2",
.data = &data_tsens_v2,
@@ -76,22 +79,27 @@ static const struct thermal_zone_of_device_ops tsens_of_ops = {
.get_trend = tsens_get_trend,
};
-static int tsens_register(struct tsens_device *tmdev)
+static int tsens_register(struct tsens_priv *priv)
{
int i;
struct thermal_zone_device *tzd;
- for (i = 0; i < tmdev->num_sensors; i++) {
- tmdev->sensor[i].tmdev = tmdev;
- tmdev->sensor[i].id = i;
- tzd = devm_thermal_zone_of_sensor_register(tmdev->dev, i,
- &tmdev->sensor[i],
+ for (i = 0; i < priv->num_sensors; i++) {
+ if (!is_sensor_enabled(priv, priv->sensor[i].hw_id)) {
+ dev_err(priv->dev, "sensor %d: disabled\n",
+ priv->sensor[i].hw_id);
+ continue;
+ }
+ priv->sensor[i].priv = priv;
+ priv->sensor[i].id = i;
+ tzd = devm_thermal_zone_of_sensor_register(priv->dev, i,
+ &priv->sensor[i],
&tsens_of_ops);
if (IS_ERR(tzd))
continue;
- tmdev->sensor[i].tzd = tzd;
- if (tmdev->ops->enable)
- tmdev->ops->enable(tmdev, i);
+ priv->sensor[i].tzd = tzd;
+ if (priv->ops->enable)
+ priv->ops->enable(priv, i);
}
return 0;
}
@@ -101,8 +109,8 @@ static int tsens_probe(struct platform_device *pdev)
int ret, i;
struct device *dev;
struct device_node *np;
- struct tsens_device *tmdev;
- const struct tsens_data *data;
+ struct tsens_priv *priv;
+ const struct tsens_plat_data *data;
const struct of_device_id *id;
u32 num_sensors;
@@ -129,55 +137,55 @@ static int tsens_probe(struct platform_device *pdev)
return -EINVAL;
}
- tmdev = devm_kzalloc(dev,
- struct_size(tmdev, sensor, num_sensors),
+ priv = devm_kzalloc(dev,
+ struct_size(priv, sensor, num_sensors),
GFP_KERNEL);
- if (!tmdev)
+ if (!priv)
return -ENOMEM;
- tmdev->dev = dev;
- tmdev->num_sensors = num_sensors;
- tmdev->ops = data->ops;
- for (i = 0; i < tmdev->num_sensors; i++) {
+ priv->dev = dev;
+ priv->num_sensors = num_sensors;
+ priv->ops = data->ops;
+ for (i = 0; i < priv->num_sensors; i++) {
if (data->hw_ids)
- tmdev->sensor[i].hw_id = data->hw_ids[i];
+ priv->sensor[i].hw_id = data->hw_ids[i];
else
- tmdev->sensor[i].hw_id = i;
- }
- for (i = 0; i < REG_ARRAY_SIZE; i++) {
- tmdev->reg_offsets[i] = data->reg_offsets[i];
+ priv->sensor[i].hw_id = i;
}
+ priv->feat = data->feat;
+ priv->fields = data->fields;
- if (!tmdev->ops || !tmdev->ops->init || !tmdev->ops->get_temp)
+ if (!priv->ops || !priv->ops->init || !priv->ops->get_temp)
return -EINVAL;
- ret = tmdev->ops->init(tmdev);
+ ret = priv->ops->init(priv);
if (ret < 0) {
dev_err(dev, "tsens init failed\n");
return ret;
}
- if (tmdev->ops->calibrate) {
- ret = tmdev->ops->calibrate(tmdev);
+ if (priv->ops->calibrate) {
+ ret = priv->ops->calibrate(priv);
if (ret < 0) {
- dev_err(dev, "tsens calibration failed\n");
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "tsens calibration failed\n");
return ret;
}
}
- ret = tsens_register(tmdev);
+ ret = tsens_register(priv);
- platform_set_drvdata(pdev, tmdev);
+ platform_set_drvdata(pdev, priv);
return ret;
}
static int tsens_remove(struct platform_device *pdev)
{
- struct tsens_device *tmdev = platform_get_drvdata(pdev);
+ struct tsens_priv *priv = platform_get_drvdata(pdev);
- if (tmdev->ops->disable)
- tmdev->ops->disable(tmdev);
+ if (priv->ops->disable)
+ priv->ops->disable(priv);
return 0;
}
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 7b7feee5dc4633b72893ddf36ec69c8405f7c318..eefe3844fb4ef4e0c2391a22e39afd9c5a499ef9 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -9,17 +9,39 @@
#define ONE_PT_CALIB 0x1
#define ONE_PT_CALIB2 0x2
#define TWO_PT_CALIB 0x3
+#define CAL_DEGC_PT1 30
+#define CAL_DEGC_PT2 120
+#define SLOPE_FACTOR 1000
+#define SLOPE_DEFAULT 3200
+
#include <linux/thermal.h>
+#include <linux/regmap.h>
+
+struct tsens_priv;
-struct tsens_device;
+enum tsens_ver {
+ VER_0_1 = 0,
+ VER_1_X,
+ VER_2_X,
+};
+/**
+ * struct tsens_sensor - data for each sensor connected to the tsens device
+ * @priv: tsens device instance that this sensor is connected to
+ * @tzd: pointer to the thermal zone that this sensor is in
+ * @offset: offset of temperature adjustment curve
+ * @id: Sensor ID
+ * @hw_id: HW ID can be used in case of platform-specific IDs
+ * @slope: slope of temperature adjustment curve
+ * @status: 8960-specific variable to track 8960 and 8660 status register offset
+ */
struct tsens_sensor {
- struct tsens_device *tmdev;
+ struct tsens_priv *priv;
struct thermal_zone_device *tzd;
int offset;
- int id;
- int hw_id;
+ unsigned int id;
+ unsigned int hw_id;
int slope;
u32 status;
};
@@ -37,63 +59,274 @@ struct tsens_sensor {
*/
struct tsens_ops {
/* mandatory callbacks */
- int (*init)(struct tsens_device *);
- int (*calibrate)(struct tsens_device *);
- int (*get_temp)(struct tsens_device *, int, int *);
+ int (*init)(struct tsens_priv *priv);
+ int (*calibrate)(struct tsens_priv *priv);
+ int (*get_temp)(struct tsens_priv *priv, int i, int *temp);
/* optional callbacks */
- int (*enable)(struct tsens_device *, int);
- void (*disable)(struct tsens_device *);
- int (*suspend)(struct tsens_device *);
- int (*resume)(struct tsens_device *);
- int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
+ int (*enable)(struct tsens_priv *priv, int i);
+ void (*disable)(struct tsens_priv *priv);
+ int (*suspend)(struct tsens_priv *priv);
+ int (*resume)(struct tsens_priv *priv);
+ int (*get_trend)(struct tsens_priv *priv, int i, enum thermal_trend *trend);
};
-enum reg_list {
- SROT_CTRL_OFFSET,
+#define REG_FIELD_FOR_EACH_SENSOR11(_name, _offset, _startbit, _stopbit) \
+ [_name##_##0] = REG_FIELD(_offset, _startbit, _stopbit), \
+ [_name##_##1] = REG_FIELD(_offset + 4, _startbit, _stopbit), \
+ [_name##_##2] = REG_FIELD(_offset + 8, _startbit, _stopbit), \
+ [_name##_##3] = REG_FIELD(_offset + 12, _startbit, _stopbit), \
+ [_name##_##4] = REG_FIELD(_offset + 16, _startbit, _stopbit), \
+ [_name##_##5] = REG_FIELD(_offset + 20, _startbit, _stopbit), \
+ [_name##_##6] = REG_FIELD(_offset + 24, _startbit, _stopbit), \
+ [_name##_##7] = REG_FIELD(_offset + 28, _startbit, _stopbit), \
+ [_name##_##8] = REG_FIELD(_offset + 32, _startbit, _stopbit), \
+ [_name##_##9] = REG_FIELD(_offset + 36, _startbit, _stopbit), \
+ [_name##_##10] = REG_FIELD(_offset + 40, _startbit, _stopbit)
- REG_ARRAY_SIZE,
+#define REG_FIELD_FOR_EACH_SENSOR16(_name, _offset, _startbit, _stopbit) \
+ [_name##_##0] = REG_FIELD(_offset, _startbit, _stopbit), \
+ [_name##_##1] = REG_FIELD(_offset + 4, _startbit, _stopbit), \
+ [_name##_##2] = REG_FIELD(_offset + 8, _startbit, _stopbit), \
+ [_name##_##3] = REG_FIELD(_offset + 12, _startbit, _stopbit), \
+ [_name##_##4] = REG_FIELD(_offset + 16, _startbit, _stopbit), \
+ [_name##_##5] = REG_FIELD(_offset + 20, _startbit, _stopbit), \
+ [_name##_##6] = REG_FIELD(_offset + 24, _startbit, _stopbit), \
+ [_name##_##7] = REG_FIELD(_offset + 28, _startbit, _stopbit), \
+ [_name##_##8] = REG_FIELD(_offset + 32, _startbit, _stopbit), \
+ [_name##_##9] = REG_FIELD(_offset + 36, _startbit, _stopbit), \
+ [_name##_##10] = REG_FIELD(_offset + 40, _startbit, _stopbit), \
+ [_name##_##11] = REG_FIELD(_offset + 44, _startbit, _stopbit), \
+ [_name##_##12] = REG_FIELD(_offset + 48, _startbit, _stopbit), \
+ [_name##_##13] = REG_FIELD(_offset + 52, _startbit, _stopbit), \
+ [_name##_##14] = REG_FIELD(_offset + 56, _startbit, _stopbit), \
+ [_name##_##15] = REG_FIELD(_offset + 60, _startbit, _stopbit)
+
+/* reg_field IDs to use as an index into an array */
+enum regfield_ids {
+ /* ----- SROT ------ */
+ /* HW_VER */
+ VER_MAJOR = 0,
+ VER_MINOR,
+ VER_STEP,
+ /* CTRL_OFFSET */
+ TSENS_EN = 3,
+ TSENS_SW_RST,
+ SENSOR_EN,
+ CODE_OR_TEMP,
+
+ /* ----- TM ------ */
+ /* STATUS */
+ LAST_TEMP_0 = 7, /* Last temperature reading */
+ LAST_TEMP_1,
+ LAST_TEMP_2,
+ LAST_TEMP_3,
+ LAST_TEMP_4,
+ LAST_TEMP_5,
+ LAST_TEMP_6,
+ LAST_TEMP_7,
+ LAST_TEMP_8,
+ LAST_TEMP_9,
+ LAST_TEMP_10,
+ LAST_TEMP_11,
+ LAST_TEMP_12,
+ LAST_TEMP_13,
+ LAST_TEMP_14,
+ LAST_TEMP_15,
+ VALID_0 = 23, /* VALID reading or not */
+ VALID_1,
+ VALID_2,
+ VALID_3,
+ VALID_4,
+ VALID_5,
+ VALID_6,
+ VALID_7,
+ VALID_8,
+ VALID_9,
+ VALID_10,
+ VALID_11,
+ VALID_12,
+ VALID_13,
+ VALID_14,
+ VALID_15,
+ MIN_STATUS_0, /* MIN threshold violated */
+ MIN_STATUS_1,
+ MIN_STATUS_2,
+ MIN_STATUS_3,
+ MIN_STATUS_4,
+ MIN_STATUS_5,
+ MIN_STATUS_6,
+ MIN_STATUS_7,
+ MIN_STATUS_8,
+ MIN_STATUS_9,
+ MIN_STATUS_10,
+ MIN_STATUS_11,
+ MIN_STATUS_12,
+ MIN_STATUS_13,
+ MIN_STATUS_14,
+ MIN_STATUS_15,
+ MAX_STATUS_0, /* MAX threshold violated */
+ MAX_STATUS_1,
+ MAX_STATUS_2,
+ MAX_STATUS_3,
+ MAX_STATUS_4,
+ MAX_STATUS_5,
+ MAX_STATUS_6,
+ MAX_STATUS_7,
+ MAX_STATUS_8,
+ MAX_STATUS_9,
+ MAX_STATUS_10,
+ MAX_STATUS_11,
+ MAX_STATUS_12,
+ MAX_STATUS_13,
+ MAX_STATUS_14,
+ MAX_STATUS_15,
+ LOWER_STATUS_0, /* LOWER threshold violated */
+ LOWER_STATUS_1,
+ LOWER_STATUS_2,
+ LOWER_STATUS_3,
+ LOWER_STATUS_4,
+ LOWER_STATUS_5,
+ LOWER_STATUS_6,
+ LOWER_STATUS_7,
+ LOWER_STATUS_8,
+ LOWER_STATUS_9,
+ LOWER_STATUS_10,
+ LOWER_STATUS_11,
+ LOWER_STATUS_12,
+ LOWER_STATUS_13,
+ LOWER_STATUS_14,
+ LOWER_STATUS_15,
+ UPPER_STATUS_0, /* UPPER threshold violated */
+ UPPER_STATUS_1,
+ UPPER_STATUS_2,
+ UPPER_STATUS_3,
+ UPPER_STATUS_4,
+ UPPER_STATUS_5,
+ UPPER_STATUS_6,
+ UPPER_STATUS_7,
+ UPPER_STATUS_8,
+ UPPER_STATUS_9,
+ UPPER_STATUS_10,
+ UPPER_STATUS_11,
+ UPPER_STATUS_12,
+ UPPER_STATUS_13,
+ UPPER_STATUS_14,
+ UPPER_STATUS_15,
+ CRITICAL_STATUS_0, /* CRITICAL threshold violated */
+ CRITICAL_STATUS_1,
+ CRITICAL_STATUS_2,
+ CRITICAL_STATUS_3,
+ CRITICAL_STATUS_4,
+ CRITICAL_STATUS_5,
+ CRITICAL_STATUS_6,
+ CRITICAL_STATUS_7,
+ CRITICAL_STATUS_8,
+ CRITICAL_STATUS_9,
+ CRITICAL_STATUS_10,
+ CRITICAL_STATUS_11,
+ CRITICAL_STATUS_12,
+ CRITICAL_STATUS_13,
+ CRITICAL_STATUS_14,
+ CRITICAL_STATUS_15,
+ /* TRDY */
+ TRDY,
+ /* INTERRUPT ENABLE */
+ INT_EN, /* Pre-V1, V1.x */
+ LOW_INT_EN, /* V2.x */
+ UP_INT_EN, /* V2.x */
+ CRIT_INT_EN, /* V2.x */
+
+ /* Keep last */
+ MAX_REGFIELDS
};
/**
- * struct tsens_data - tsens instance specific data
- * @num_sensors: Max number of sensors supported by platform
+ * struct tsens_features - Features supported by the IP
+ * @ver_major: Major number of IP version
+ * @crit_int: does the IP support critical interrupts?
+ * @adc: do the sensors only output adc code (instead of temperature)?
+ * @srot_split: does the IP neatly splits the register space into SROT and TM,
+ * with SROT only being available to secure boot firmware?
+ * @max_sensors: maximum sensors supported by this version of the IP
+ */
+struct tsens_features {
+ unsigned int ver_major;
+ unsigned int crit_int:1;
+ unsigned int adc:1;
+ unsigned int srot_split:1;
+ unsigned int max_sensors;
+};
+
+/**
+ * struct tsens_plat_data - tsens compile-time platform data
+ * @num_sensors: Number of sensors supported by platform
* @ops: operations the tsens instance supports
* @hw_ids: Subset of sensors ids supported by platform, if not the first n
- * @reg_offsets: Register offsets for commonly used registers
+ * @feat: features of the IP
+ * @fields: bitfield locations
*/
-struct tsens_data {
+struct tsens_plat_data {
const u32 num_sensors;
const struct tsens_ops *ops;
- const u16 reg_offsets[REG_ARRAY_SIZE];
unsigned int *hw_ids;
+ const struct tsens_features *feat;
+ const struct reg_field *fields;
};
-/* Registers to be saved/restored across a context loss */
+/**
+ * struct tsens_context - Registers to be saved/restored across a context loss
+ */
struct tsens_context {
int threshold;
int control;
};
-struct tsens_device {
+/**
+ * struct tsens_priv - private data for each instance of the tsens IP
+ * @dev: pointer to struct device
+ * @num_sensors: number of sensors enabled on this device
+ * @tm_map: pointer to TM register address space
+ * @srot_map: pointer to SROT register address space
+ * @tm_offset: deal with old device trees that don't address TM and SROT
+ * address space separately
+ * @rf: array of regmap_fields used to store value of the field
+ * @ctx: registers to be saved and restored during suspend/resume
+ * @feat: features of the IP
+ * @fields: bitfield locations
+ * @ops: pointer to list of callbacks supported by this device
+ * @sensor: list of sensors attached to this device
+ */
+struct tsens_priv {
struct device *dev;
u32 num_sensors;
struct regmap *tm_map;
struct regmap *srot_map;
u32 tm_offset;
- u16 reg_offsets[REG_ARRAY_SIZE];
+ struct regmap_field *rf[MAX_REGFIELDS];
struct tsens_context ctx;
+ const struct tsens_features *feat;
+ const struct reg_field *fields;
const struct tsens_ops *ops;
struct tsens_sensor sensor[0];
};
-char *qfprom_read(struct device *, const char *);
-void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
-int init_common(struct tsens_device *);
-int get_temp_common(struct tsens_device *, int, int *);
+char *qfprom_read(struct device *dev, const char *cname);
+void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode);
+int init_common(struct tsens_priv *priv);
+int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp);
+int get_temp_common(struct tsens_priv *priv, int i, int *temp);
+bool is_sensor_enabled(struct tsens_priv *priv, u32 hw_id);
+
+/* TSENS target */
+extern const struct tsens_plat_data data_8960;
+
+/* TSENS v0.1 targets */
+extern const struct tsens_plat_data data_8916, data_8974;
/* TSENS v1 targets */
-extern const struct tsens_data data_8916, data_8974, data_8960;
+extern const struct tsens_plat_data data_tsens_v1;
+
/* TSENS v2 targets */
-extern const struct tsens_data data_8996, data_tsens_v2;
+extern const struct tsens_plat_data data_8996, data_tsens_v2;
#endif /* __QCOM_TSENS_H__ */
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 3b5f5b3fb1bc9b94e5aa73032cb60bede1d12190..7b364933bfb18b2d863f7f869fbe78199ee2ca81 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -193,11 +193,6 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
struct qoriq_tmu_data *data;
struct device_node *np = pdev->dev.of_node;
- if (!np) {
- dev_err(&pdev->dev, "Device OF-Node is NULL");
- return -ENODEV;
- }
-
data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
GFP_KERNEL);
if (!data)
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 88fa41cf16e83e67f670295988897542e90bb7d9..83f306265ee192c17b79ec94c1431f09fa42c734 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -14,7 +14,6 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <linux/spinlock.h>
#include <linux/sys_soc.h>
#include <linux/thermal.h>
@@ -82,7 +81,6 @@ struct rcar_gen3_thermal_tsc {
struct rcar_gen3_thermal_priv {
struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM];
unsigned int num_tscs;
- spinlock_t lock; /* Protect interrupts on and off */
void (*thermal_init)(struct rcar_gen3_thermal_tsc *tsc);
};
@@ -232,38 +230,16 @@ static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data)
{
struct rcar_gen3_thermal_priv *priv = data;
u32 status;
- int i, ret = IRQ_HANDLED;
+ int i;
- spin_lock(&priv->lock);
for (i = 0; i < priv->num_tscs; i++) {
status = rcar_gen3_thermal_read(priv->tscs[i], REG_GEN3_IRQSTR);
rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQSTR, 0);
if (status)
- ret = IRQ_WAKE_THREAD;
+ thermal_zone_device_update(priv->tscs[i]->zone,
+ THERMAL_EVENT_UNSPECIFIED);
}
- if (ret == IRQ_WAKE_THREAD)
- rcar_thermal_irq_set(priv, false);
-
- spin_unlock(&priv->lock);
-
- return ret;
-}
-
-static irqreturn_t rcar_gen3_thermal_irq_thread(int irq, void *data)
-{
- struct rcar_gen3_thermal_priv *priv = data;
- unsigned long flags;
- int i;
-
- for (i = 0; i < priv->num_tscs; i++)
- thermal_zone_device_update(priv->tscs[i]->zone,
- THERMAL_EVENT_UNSPECIFIED);
-
- spin_lock_irqsave(&priv->lock, flags);
- rcar_thermal_irq_set(priv, true);
- spin_unlock_irqrestore(&priv->lock, flags);
-
return IRQ_HANDLED;
}
@@ -307,7 +283,7 @@ static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
usleep_range(1000, 2000);
- rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0x3F);
+ rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0);
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, IRQ_TEMPD1 | IRQ_TEMP2);
@@ -331,6 +307,9 @@ MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
static int rcar_gen3_thermal_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev);
+
+ rcar_thermal_irq_set(priv, false);
pm_runtime_put(dev);
pm_runtime_disable(dev);
@@ -371,8 +350,6 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
if (soc_device_match(r8a7795es1))
priv->thermal_init = rcar_gen3_thermal_init_r8a7795es1;
- spin_lock_init(&priv->lock);
-
platform_set_drvdata(pdev, priv);
/*
@@ -390,9 +367,9 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
if (!irqname)
return -ENOMEM;
- ret = devm_request_threaded_irq(dev, irq, rcar_gen3_thermal_irq,
- rcar_gen3_thermal_irq_thread,
- IRQF_SHARED, irqname, priv);
+ ret = devm_request_threaded_irq(dev, irq, NULL,
+ rcar_gen3_thermal_irq,
+ IRQF_ONESHOT, irqname, priv);
if (ret)
return ret;
}
@@ -433,10 +410,6 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
}
tsc->zone = zone;
- ret = of_thermal_get_ntrips(tsc->zone);
- if (ret < 0)
- goto error_unregister;
-
tsc->zone->tzp->no_hwmon = false;
ret = thermal_add_hwmon_sysfs(tsc->zone);
if (ret)
@@ -448,6 +421,10 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
goto error_unregister;
}
+ ret = of_thermal_get_ntrips(tsc->zone);
+ if (ret < 0)
+ goto error_unregister;
+
dev_info(dev, "TSC%d: Loaded %d trip points\n", i, ret);
}
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 97462e9b40d8b8da91694aca523f4dde5796d963..d0873de718da92189d57b1510a72dac504ef77cf 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -52,6 +52,7 @@ struct rcar_thermal_chip {
unsigned int irq_per_ch : 1;
unsigned int needs_suspend_resume : 1;
unsigned int nirqs;
+ unsigned int ctemp_bands;
};
static const struct rcar_thermal_chip rcar_thermal = {
@@ -60,6 +61,7 @@ static const struct rcar_thermal_chip rcar_thermal = {
.irq_per_ch = 0,
.needs_suspend_resume = 0,
.nirqs = 1,
+ .ctemp_bands = 1,
};
static const struct rcar_thermal_chip rcar_gen2_thermal = {
@@ -68,6 +70,7 @@ static const struct rcar_thermal_chip rcar_gen2_thermal = {
.irq_per_ch = 0,
.needs_suspend_resume = 0,
.nirqs = 1,
+ .ctemp_bands = 1,
};
static const struct rcar_thermal_chip rcar_gen3_thermal = {
@@ -80,6 +83,7 @@ static const struct rcar_thermal_chip rcar_gen3_thermal = {
* interrupts to detect a temperature change, rise or fall.
*/
.nirqs = 2,
+ .ctemp_bands = 2,
};
struct rcar_thermal_priv {
@@ -263,7 +267,12 @@ static int rcar_thermal_get_current_temp(struct rcar_thermal_priv *priv,
return ret;
mutex_lock(&priv->lock);
- tmp = MCELSIUS((priv->ctemp * 5) - 65);
+ if (priv->chip->ctemp_bands == 1)
+ tmp = MCELSIUS((priv->ctemp * 5) - 65);
+ else if (priv->ctemp < 24)
+ tmp = MCELSIUS(((priv->ctemp * 55) - 720) / 10);
+ else
+ tmp = MCELSIUS((priv->ctemp * 5) - 60);
mutex_unlock(&priv->lock);
if ((tmp < MCELSIUS(-45)) || (tmp > MCELSIUS(125))) {
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 9c7643d62ed70782e35a7807f90692e9c47670b2..bda1ca199abd3f9cbbe3a8195d9ae93a61036139 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -172,6 +172,9 @@ struct rockchip_thermal_data {
int tshut_temp;
enum tshut_mode tshut_mode;
enum tshut_polarity tshut_polarity;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *gpio_state;
+ struct pinctrl_state *otp_state;
};
/**
@@ -222,11 +225,15 @@ struct rockchip_thermal_data {
#define GRF_TSADC_TESTBIT_L 0x0e648
#define GRF_TSADC_TESTBIT_H 0x0e64c
+#define PX30_GRF_SOC_CON2 0x0408
+
#define GRF_SARADC_TESTBIT_ON (0x10001 << 2)
#define GRF_TSADC_TESTBIT_H_ON (0x10001 << 2)
#define GRF_TSADC_VCM_EN_L (0x10001 << 7)
#define GRF_TSADC_VCM_EN_H (0x10001 << 7)
+#define GRF_CON_TSADC_CH_INV (0x10001 << 1)
+
/**
* struct tsadc_table - code to temperature conversion table
* @code: the value of adc channel
@@ -689,6 +696,13 @@ static void rk_tsadcv3_initialize(struct regmap *grf, void __iomem *regs,
regs + TSADCV2_AUTO_CON);
}
+static void rk_tsadcv4_initialize(struct regmap *grf, void __iomem *regs,
+ enum tshut_polarity tshut_polarity)
+{
+ rk_tsadcv2_initialize(grf, regs, tshut_polarity);
+ regmap_write(grf, PX30_GRF_SOC_CON2, GRF_CON_TSADC_CH_INV);
+}
+
static void rk_tsadcv2_irq_ack(void __iomem *regs)
{
u32 val;
@@ -818,6 +832,30 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
writel_relaxed(val, regs + TSADCV2_INT_EN);
}
+static const struct rockchip_tsadc_chip px30_tsadc_data = {
+ .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+ .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+ .chn_num = 2, /* 2 channels for tsadc */
+
+ .tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
+ .tshut_temp = 95000,
+
+ .initialize = rk_tsadcv4_initialize,
+ .irq_ack = rk_tsadcv3_irq_ack,
+ .control = rk_tsadcv3_control,
+ .get_temp = rk_tsadcv2_get_temp,
+ .set_alarm_temp = rk_tsadcv2_alarm_temp,
+ .set_tshut_temp = rk_tsadcv2_tshut_temp,
+ .set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+ .table = {
+ .id = rk3328_code_table,
+ .length = ARRAY_SIZE(rk3328_code_table),
+ .data_mask = TSADCV2_DATA_MASK,
+ .mode = ADC_INCREMENT,
+ },
+};
+
static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
.chn_num = 1, /* one channel for tsadc */
@@ -990,6 +1028,9 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
};
static const struct of_device_id of_rockchip_thermal_match[] = {
+ { .compatible = "rockchip,px30-tsadc",
+ .data = (void *)&px30_tsadc_data,
+ },
{
.compatible = "rockchip,rv1108-tsadc",
.data = (void *)&rv1108_tsadc_data,
@@ -1242,6 +1283,8 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
return error;
}
+ thermal->chip->control(thermal->regs, false);
+
error = clk_prepare_enable(thermal->clk);
if (error) {
dev_err(&pdev->dev, "failed to enable converter clock: %d\n",
@@ -1267,6 +1310,30 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
thermal->chip->initialize(thermal->grf, thermal->regs,
thermal->tshut_polarity);
+ if (thermal->tshut_mode == TSHUT_MODE_GPIO) {
+ thermal->pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (IS_ERR(thermal->pinctrl)) {
+ dev_err(&pdev->dev, "failed to find thermal pinctrl\n");
+ return PTR_ERR(thermal->pinctrl);
+ }
+
+ thermal->gpio_state = pinctrl_lookup_state(thermal->pinctrl,
+ "gpio");
+ if (IS_ERR_OR_NULL(thermal->gpio_state)) {
+ dev_err(&pdev->dev, "failed to find thermal gpio state\n");
+ return -EINVAL;
+ }
+
+ thermal->otp_state = pinctrl_lookup_state(thermal->pinctrl,
+ "otpout");
+ if (IS_ERR_OR_NULL(thermal->otp_state)) {
+ dev_err(&pdev->dev, "failed to find thermal otpout state\n");
+ return -EINVAL;
+ }
+
+ pinctrl_select_state(thermal->pinctrl, thermal->otp_state);
+ }
+
for (i = 0; i < thermal->chip->chn_num; i++) {
error = rockchip_thermal_register_sensor(pdev, thermal,
&thermal->sensors[i],
@@ -1337,8 +1404,8 @@ static int __maybe_unused rockchip_thermal_suspend(struct device *dev)
clk_disable(thermal->pclk);
clk_disable(thermal->clk);
-
- pinctrl_pm_select_sleep_state(dev);
+ if (thermal->tshut_mode == TSHUT_MODE_GPIO)
+ pinctrl_select_state(thermal->pinctrl, thermal->gpio_state);
return 0;
}
@@ -1383,7 +1450,8 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev)
for (i = 0; i < thermal->chip->chn_num; i++)
rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
- pinctrl_pm_select_default_state(dev);
+ if (thermal->tshut_mode == TSHUT_MODE_GPIO)
+ pinctrl_select_state(thermal->pinctrl, thermal->otp_state);
return 0;
}
diff --git a/drivers/thermal/st/Kconfig b/drivers/thermal/st/Kconfig
index b80f9a9e4f8f603dd822d90a9154dea96fafcb6d..d8b1a4586d0bf28812d536e8a0c2dbcfe3f7ba23 100644
--- a/drivers/thermal/st/Kconfig
+++ b/drivers/thermal/st/Kconfig
@@ -3,9 +3,9 @@
#
config ST_THERMAL
- tristate "Thermal sensors on STMicroelectronics STi series of SoCs"
- help
- Support for thermal sensors on STMicroelectronics STi series of SoCs.
+ tristate "Thermal sensors on STMicroelectronics STi series of SoCs"
+ help
+ Support for thermal sensors on STMicroelectronics STi series of SoCs.
config ST_THERMAL_SYSCFG
select ST_THERMAL
@@ -16,11 +16,11 @@ config ST_THERMAL_MEMMAP
tristate "STi series memory mapped access based thermal sensors"
config STM32_THERMAL
- tristate "Thermal framework support on STMicroelectronics STM32 series of SoCs"
- depends on MACH_STM32MP157
- default y
- help
- Support for thermal framework on STMicroelectronics STM32 series of
- SoCs. This thermal driver allows to access to general thermal framework
- functionalities and to acces to SoC sensor functionalities. This
- configuration is fully dependent of MACH_STM32MP157.
+ tristate "Thermal framework support on STMicroelectronics STM32 series of SoCs"
+ depends on MACH_STM32MP157
+ default y
+ help
+ Support for thermal framework on STMicroelectronics STM32 series of
+ SoCs. This thermal driver allows to access to general thermal framework
+ functionalities and to acces to SoC sensor functionalities. This
+ configuration is fully dependent of MACH_STM32MP157.
diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c
index bbd73c5a4a4e92f4c3d361f129e7ec7d409a6d94..cf9ddc52f30e1735ea6d583de562624df68df757 100644
--- a/drivers/thermal/st/stm_thermal.c
+++ b/drivers/thermal/st/stm_thermal.c
@@ -570,8 +570,7 @@ static int stm_thermal_prepare(struct stm_thermal_sensor *sensor)
static int stm_thermal_suspend(struct device *dev)
{
int ret;
- struct platform_device *pdev = to_platform_device(dev);
- struct stm_thermal_sensor *sensor = platform_get_drvdata(pdev);
+ struct stm_thermal_sensor *sensor = dev_get_drvdata(dev);
ret = stm_thermal_sensor_off(sensor);
if (ret)
@@ -585,8 +584,7 @@ static int stm_thermal_suspend(struct device *dev)
static int stm_thermal_resume(struct device *dev)
{
int ret;
- struct platform_device *pdev = to_platform_device(dev);
- struct stm_thermal_sensor *sensor = platform_get_drvdata(pdev);
+ struct stm_thermal_sensor *sensor = dev_get_drvdata(dev);
ret = stm_thermal_prepare(sensor);
if (ret)
diff --git a/drivers/thermal/tegra/Kconfig b/drivers/thermal/tegra/Kconfig
index f8740f7852e3b8bd52cf6c5088a9a27a31d290c9..fc0b33b3f26bd5cc346e08c07f295a4d5295f837 100644
--- a/drivers/thermal/tegra/Kconfig
+++ b/drivers/thermal/tegra/Kconfig
@@ -14,7 +14,7 @@ config TEGRA_BPMP_THERMAL
tristate "Tegra BPMP thermal sensing"
depends on TEGRA_BPMP || COMPILE_TEST
help
- Enable this option for support for sensing system temperature of NVIDIA
- Tegra systems-on-chip with the BPMP coprocessor (Tegra186).
+ Enable this option for support for sensing system temperature of NVIDIA
+ Tegra systems-on-chip with the BPMP coprocessor (Tegra186).
endmenu
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index 70043a28eb7a1d91956eb808eb1b0a9fede3960c..fcf70a3728b60451ce5153baa039f16c2b8d3943 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -1,5 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2014 - 2018, NVIDIA CORPORATION. All rights reserved.
*
* Author:
* Mikko Perttunen <mperttunen@nvidia.com>
@@ -22,6 +23,8 @@
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -85,12 +88,51 @@
#define THERMCTL_LVL0_UP_STATS 0x10
#define THERMCTL_LVL0_DN_STATS 0x14
+#define THERMCTL_INTR_STATUS 0x84
+
+#define TH_INTR_MD0_MASK BIT(25)
+#define TH_INTR_MU0_MASK BIT(24)
+#define TH_INTR_GD0_MASK BIT(17)
+#define TH_INTR_GU0_MASK BIT(16)
+#define TH_INTR_CD0_MASK BIT(9)
+#define TH_INTR_CU0_MASK BIT(8)
+#define TH_INTR_PD0_MASK BIT(1)
+#define TH_INTR_PU0_MASK BIT(0)
+#define TH_INTR_IGNORE_MASK 0xFCFCFCFC
+
#define THERMCTL_STATS_CTL 0x94
#define STATS_CTL_CLR_DN 0x8
#define STATS_CTL_EN_DN 0x4
#define STATS_CTL_CLR_UP 0x2
#define STATS_CTL_EN_UP 0x1
+#define OC1_CFG 0x310
+#define OC1_CFG_LONG_LATENCY_MASK BIT(6)
+#define OC1_CFG_HW_RESTORE_MASK BIT(5)
+#define OC1_CFG_PWR_GOOD_MASK_MASK BIT(4)
+#define OC1_CFG_THROTTLE_MODE_MASK (0x3 << 2)
+#define OC1_CFG_ALARM_POLARITY_MASK BIT(1)
+#define OC1_CFG_EN_THROTTLE_MASK BIT(0)
+
+#define OC1_CNT_THRESHOLD 0x314
+#define OC1_THROTTLE_PERIOD 0x318
+#define OC1_ALARM_COUNT 0x31c
+#define OC1_FILTER 0x320
+#define OC1_STATS 0x3a8
+
+#define OC_INTR_STATUS 0x39c
+#define OC_INTR_ENABLE 0x3a0
+#define OC_INTR_DISABLE 0x3a4
+#define OC_STATS_CTL 0x3c4
+#define OC_STATS_CTL_CLR_ALL 0x2
+#define OC_STATS_CTL_EN_ALL 0x1
+
+#define OC_INTR_OC1_MASK BIT(0)
+#define OC_INTR_OC2_MASK BIT(1)
+#define OC_INTR_OC3_MASK BIT(2)
+#define OC_INTR_OC4_MASK BIT(3)
+#define OC_INTR_OC5_MASK BIT(4)
+
#define THROT_GLOBAL_CFG 0x400
#define THROT_GLOBAL_ENB_MASK BIT(0)
@@ -160,6 +202,15 @@
/* get dividend from the depth */
#define THROT_DEPTH_DIVIDEND(depth) ((256 * (100 - (depth)) / 100) - 1)
+/* gk20a nv_therm interface N:3 Mapping. Levels defined in tegra124-sochterm.h
+ * level vector
+ * NONE 3'b000
+ * LOW 3'b001
+ * MED 3'b011
+ * HIGH 3'b111
+ */
+#define THROT_LEVEL_TO_DEPTH(level) ((0x1 << (level)) - 1)
+
/* get THROT_PSKIP_xxx offset per LIGHT/HEAVY throt and CPU/GPU dev */
#define THROT_OFFSET 0x30
#define THROT_PSKIP_CTRL(throt, dev) (THROT_PSKIP_CTRL_LITE_CPU + \
@@ -173,6 +224,25 @@
#define THROT_DELAY_CTRL(throt) (THROT_DELAY_LITE + \
(THROT_OFFSET * throt))
+#define ALARM_OFFSET 0x14
+#define ALARM_CFG(throt) (OC1_CFG + \
+ (ALARM_OFFSET * (throt - THROTTLE_OC1)))
+
+#define ALARM_CNT_THRESHOLD(throt) (OC1_CNT_THRESHOLD + \
+ (ALARM_OFFSET * (throt - THROTTLE_OC1)))
+
+#define ALARM_THROTTLE_PERIOD(throt) (OC1_THROTTLE_PERIOD + \
+ (ALARM_OFFSET * (throt - THROTTLE_OC1)))
+
+#define ALARM_ALARM_COUNT(throt) (OC1_ALARM_COUNT + \
+ (ALARM_OFFSET * (throt - THROTTLE_OC1)))
+
+#define ALARM_FILTER(throt) (OC1_FILTER + \
+ (ALARM_OFFSET * (throt - THROTTLE_OC1)))
+
+#define ALARM_STATS(throt) (OC1_STATS + \
+ (4 * (throt - THROTTLE_OC1)))
+
/* get CCROC_THROT_PSKIP_xxx offset per HIGH/MED/LOW vect*/
#define CCROC_THROT_OFFSET 0x0c
#define CCROC_THROT_PSKIP_CTRL_CPU_REG(vect) (CCROC_THROT_PSKIP_CTRL_CPU + \
@@ -184,15 +254,32 @@
#define THERMCTL_LVL_REGS_SIZE 0x20
#define THERMCTL_LVL_REG(rg, lv) ((rg) + ((lv) * THERMCTL_LVL_REGS_SIZE))
+#define OC_THROTTLE_MODE_DISABLED 0
+#define OC_THROTTLE_MODE_BRIEF 2
+
static const int min_low_temp = -127000;
static const int max_high_temp = 127000;
enum soctherm_throttle_id {
THROTTLE_LIGHT = 0,
THROTTLE_HEAVY,
+ THROTTLE_OC1,
+ THROTTLE_OC2,
+ THROTTLE_OC3,
+ THROTTLE_OC4,
+ THROTTLE_OC5, /* OC5 is reserved */
THROTTLE_SIZE,
};
+enum soctherm_oc_irq_id {
+ TEGRA_SOC_OC_IRQ_1,
+ TEGRA_SOC_OC_IRQ_2,
+ TEGRA_SOC_OC_IRQ_3,
+ TEGRA_SOC_OC_IRQ_4,
+ TEGRA_SOC_OC_IRQ_5,
+ TEGRA_SOC_OC_IRQ_MAX,
+};
+
enum soctherm_throttle_dev_id {
THROTTLE_DEV_CPU = 0,
THROTTLE_DEV_GPU,
@@ -202,6 +289,11 @@ enum soctherm_throttle_dev_id {
static const char *const throt_names[] = {
[THROTTLE_LIGHT] = "light",
[THROTTLE_HEAVY] = "heavy",
+ [THROTTLE_OC1] = "oc1",
+ [THROTTLE_OC2] = "oc2",
+ [THROTTLE_OC3] = "oc3",
+ [THROTTLE_OC4] = "oc4",
+ [THROTTLE_OC5] = "oc5",
};
struct tegra_soctherm;
@@ -213,12 +305,23 @@ struct tegra_thermctl_zone {
const struct tegra_tsensor_group *sg;
};
+struct soctherm_oc_cfg {
+ u32 active_low;
+ u32 throt_period;
+ u32 alarm_cnt_thresh;
+ u32 alarm_filter;
+ u32 mode;
+ bool intr_en;
+};
+
struct soctherm_throt_cfg {
const char *name;
unsigned int id;
u8 priority;
u8 cpu_throt_level;
u32 cpu_throt_depth;
+ u32 gpu_throt_level;
+ struct soctherm_oc_cfg oc_cfg;
struct thermal_cooling_device *cdev;
bool init;
};
@@ -231,6 +334,9 @@ struct tegra_soctherm {
void __iomem *clk_regs;
void __iomem *ccroc_regs;
+ int thermal_irq;
+ int edp_irq;
+
u32 *calib;
struct thermal_zone_device **thermctl_tzs;
struct tegra_soctherm_soc *soc;
@@ -238,8 +344,19 @@ struct tegra_soctherm {
struct soctherm_throt_cfg throt_cfgs[THROTTLE_SIZE];
struct dentry *debugfs_dir;
+
+ struct mutex thermctl_lock;
};
+struct soctherm_oc_irq_chip_data {
+ struct mutex irq_lock; /* serialize OC IRQs */
+ struct irq_chip irq_chip;
+ struct irq_domain *domain;
+ int irq_enable;
+};
+
+static struct soctherm_oc_irq_chip_data soc_irq_cdata;
+
/**
* ccroc_writel() - writes a value to a CCROC register
* @ts: pointer to a struct tegra_soctherm
@@ -446,6 +563,24 @@ find_throttle_cfg_by_name(struct tegra_soctherm *ts, const char *name)
return NULL;
}
+static int tsensor_group_thermtrip_get(struct tegra_soctherm *ts, int id)
+{
+ int i, temp = min_low_temp;
+ struct tsensor_group_thermtrips *tt = ts->soc->thermtrips;
+
+ if (id >= TEGRA124_SOCTHERM_SENSOR_NUM)
+ return temp;
+
+ if (tt) {
+ for (i = 0; i < ts->soc->num_ttgs; i++) {
+ if (tt[i].id == id)
+ return tt[i].temp;
+ }
+ }
+
+ return temp;
+}
+
static int tegra_thermctl_set_trip_temp(void *data, int trip, int temp)
{
struct tegra_thermctl_zone *zone = data;
@@ -464,7 +599,16 @@ static int tegra_thermctl_set_trip_temp(void *data, int trip, int temp)
return ret;
if (type == THERMAL_TRIP_CRITICAL) {
- return thermtrip_program(dev, sg, temp);
+ /*
+ * If thermtrips property is set in DT,
+ * doesn't need to program critical type trip to HW,
+ * if not, program critical trip to HW.
+ */
+ if (min_low_temp == tsensor_group_thermtrip_get(ts, sg->id))
+ return thermtrip_program(dev, sg, temp);
+ else
+ return 0;
+
} else if (type == THERMAL_TRIP_HOT) {
int i;
@@ -519,10 +663,60 @@ static int tegra_thermctl_get_trend(void *data, int trip,
return 0;
}
+static void thermal_irq_enable(struct tegra_thermctl_zone *zn)
+{
+ u32 r;
+
+ /* multiple zones could be handling and setting trips at once */
+ mutex_lock(&zn->ts->thermctl_lock);
+ r = readl(zn->ts->regs + THERMCTL_INTR_ENABLE);
+ r = REG_SET_MASK(r, zn->sg->thermctl_isr_mask, TH_INTR_UP_DN_EN);
+ writel(r, zn->ts->regs + THERMCTL_INTR_ENABLE);
+ mutex_unlock(&zn->ts->thermctl_lock);
+}
+
+static void thermal_irq_disable(struct tegra_thermctl_zone *zn)
+{
+ u32 r;
+
+ /* multiple zones could be handling and setting trips at once */
+ mutex_lock(&zn->ts->thermctl_lock);
+ r = readl(zn->ts->regs + THERMCTL_INTR_DISABLE);
+ r = REG_SET_MASK(r, zn->sg->thermctl_isr_mask, 0);
+ writel(r, zn->ts->regs + THERMCTL_INTR_DISABLE);
+ mutex_unlock(&zn->ts->thermctl_lock);
+}
+
+static int tegra_thermctl_set_trips(void *data, int lo, int hi)
+{
+ struct tegra_thermctl_zone *zone = data;
+ u32 r;
+
+ thermal_irq_disable(zone);
+
+ r = readl(zone->ts->regs + zone->sg->thermctl_lvl0_offset);
+ r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_EN_MASK, 0);
+ writel(r, zone->ts->regs + zone->sg->thermctl_lvl0_offset);
+
+ lo = enforce_temp_range(zone->dev, lo) / zone->ts->soc->thresh_grain;
+ hi = enforce_temp_range(zone->dev, hi) / zone->ts->soc->thresh_grain;
+ dev_dbg(zone->dev, "%s hi:%d, lo:%d\n", __func__, hi, lo);
+
+ r = REG_SET_MASK(r, zone->sg->thermctl_lvl0_up_thresh_mask, hi);
+ r = REG_SET_MASK(r, zone->sg->thermctl_lvl0_dn_thresh_mask, lo);
+ r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_EN_MASK, 1);
+ writel(r, zone->ts->regs + zone->sg->thermctl_lvl0_offset);
+
+ thermal_irq_enable(zone);
+
+ return 0;
+}
+
static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
.get_temp = tegra_thermctl_get_temp,
.set_trip_temp = tegra_thermctl_set_trip_temp,
.get_trend = tegra_thermctl_get_trend,
+ .set_trips = tegra_thermctl_set_trips,
};
static int get_hot_temp(struct thermal_zone_device *tz, int *trip, int *temp)
@@ -555,7 +749,8 @@ static int get_hot_temp(struct thermal_zone_device *tz, int *trip, int *temp)
* @dev: struct device * of the SOC_THERM instance
*
* Configure the SOC_THERM HW trip points, setting "THERMTRIP"
- * "THROTTLE" trip points , using "critical" or "hot" type trip_temp
+ * "THROTTLE" trip points , using "thermtrips", "critical" or "hot"
+ * type trip_temp
* from thermal zone.
* After they have been configured, THERMTRIP or THROTTLE will take
* action when the configured SoC thermal sensor group reaches a
@@ -577,28 +772,23 @@ static int tegra_soctherm_set_hwtrips(struct device *dev,
{
struct tegra_soctherm *ts = dev_get_drvdata(dev);
struct soctherm_throt_cfg *stc;
- int i, trip, temperature;
- int ret;
+ int i, trip, temperature, ret;
- ret = tz->ops->get_crit_temp(tz, &temperature);
- if (ret) {
- dev_warn(dev, "thermtrip: %s: missing critical temperature\n",
- sg->name);
- goto set_throttle;
- }
+ /* Get thermtrips. If missing, try to get critical trips. */
+ temperature = tsensor_group_thermtrip_get(ts, sg->id);
+ if (min_low_temp == temperature)
+ if (tz->ops->get_crit_temp(tz, &temperature))
+ temperature = max_high_temp;
ret = thermtrip_program(dev, sg, temperature);
if (ret) {
- dev_err(dev, "thermtrip: %s: error during enable\n",
- sg->name);
+ dev_err(dev, "thermtrip: %s: error during enable\n", sg->name);
return ret;
}
- dev_info(dev,
- "thermtrip: will shut down when %s reaches %d mC\n",
+ dev_info(dev, "thermtrip: will shut down when %s reaches %d mC\n",
sg->name, temperature);
-set_throttle:
ret = get_hot_temp(tz, &trip, &temperature);
if (ret) {
dev_info(dev, "throttrip: %s: missing hot temperature\n",
@@ -606,7 +796,7 @@ static int tegra_soctherm_set_hwtrips(struct device *dev,
return 0;
}
- for (i = 0; i < THROTTLE_SIZE; i++) {
+ for (i = 0; i < THROTTLE_OC1; i++) {
struct thermal_cooling_device *cdev;
if (!ts->throt_cfgs[i].init)
@@ -638,6 +828,461 @@ static int tegra_soctherm_set_hwtrips(struct device *dev,
return 0;
}
+static irqreturn_t soctherm_thermal_isr(int irq, void *dev_id)
+{
+ struct tegra_soctherm *ts = dev_id;
+ u32 r;
+
+ /* Case for no lock:
+ * Although interrupts are enabled in set_trips, there is still no need
+ * to lock here because the interrupts are disabled before programming
+ * new trip points. Hence there cant be a interrupt on the same sensor.
+ * An interrupt can however occur on a sensor while trips are being
+ * programmed on a different one. This beign a LEVEL interrupt won't
+ * cause a new interrupt but this is taken care of by the re-reading of
+ * the STATUS register in the thread function.
+ */
+ r = readl(ts->regs + THERMCTL_INTR_STATUS);
+ writel(r, ts->regs + THERMCTL_INTR_DISABLE);
+
+ return IRQ_WAKE_THREAD;
+}
+
+/**
+ * soctherm_thermal_isr_thread() - Handles a thermal interrupt request
+ * @irq: The interrupt number being requested; not used
+ * @dev_id: Opaque pointer to tegra_soctherm;
+ *
+ * Clears the interrupt status register if there are expected
+ * interrupt bits set.
+ * The interrupt(s) are then handled by updating the corresponding
+ * thermal zones.
+ *
+ * An error is logged if any unexpected interrupt bits are set.
+ *
+ * Disabled interrupts are re-enabled.
+ *
+ * Return: %IRQ_HANDLED. Interrupt was handled and no further processing
+ * is needed.
+ */
+static irqreturn_t soctherm_thermal_isr_thread(int irq, void *dev_id)
+{
+ struct tegra_soctherm *ts = dev_id;
+ struct thermal_zone_device *tz;
+ u32 st, ex = 0, cp = 0, gp = 0, pl = 0, me = 0;
+
+ st = readl(ts->regs + THERMCTL_INTR_STATUS);
+
+ /* deliberately clear expected interrupts handled in SW */
+ cp |= st & TH_INTR_CD0_MASK;
+ cp |= st & TH_INTR_CU0_MASK;
+
+ gp |= st & TH_INTR_GD0_MASK;
+ gp |= st & TH_INTR_GU0_MASK;
+
+ pl |= st & TH_INTR_PD0_MASK;
+ pl |= st & TH_INTR_PU0_MASK;
+
+ me |= st & TH_INTR_MD0_MASK;
+ me |= st & TH_INTR_MU0_MASK;
+
+ ex |= cp | gp | pl | me;
+ if (ex) {
+ writel(ex, ts->regs + THERMCTL_INTR_STATUS);
+ st &= ~ex;
+
+ if (cp) {
+ tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_CPU];
+ thermal_zone_device_update(tz,
+ THERMAL_EVENT_UNSPECIFIED);
+ }
+
+ if (gp) {
+ tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_GPU];
+ thermal_zone_device_update(tz,
+ THERMAL_EVENT_UNSPECIFIED);
+ }
+
+ if (pl) {
+ tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_PLLX];
+ thermal_zone_device_update(tz,
+ THERMAL_EVENT_UNSPECIFIED);
+ }
+
+ if (me) {
+ tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_MEM];
+ thermal_zone_device_update(tz,
+ THERMAL_EVENT_UNSPECIFIED);
+ }
+ }
+
+ /* deliberately ignore expected interrupts NOT handled in SW */
+ ex |= TH_INTR_IGNORE_MASK;
+ st &= ~ex;
+
+ if (st) {
+ /* Whine about any other unexpected INTR bits still set */
+ pr_err("soctherm: Ignored unexpected INTRs 0x%08x\n", st);
+ writel(st, ts->regs + THERMCTL_INTR_STATUS);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * soctherm_oc_intr_enable() - Enables the soctherm over-current interrupt
+ * @alarm: The soctherm throttle id
+ * @enable: Flag indicating enable the soctherm over-current
+ * interrupt or disable it
+ *
+ * Enables a specific over-current pins @alarm to raise an interrupt if the flag
+ * is set and the alarm corresponds to OC1, OC2, OC3, or OC4.
+ */
+static void soctherm_oc_intr_enable(struct tegra_soctherm *ts,
+ enum soctherm_throttle_id alarm,
+ bool enable)
+{
+ u32 r;
+
+ if (!enable)
+ return;
+
+ r = readl(ts->regs + OC_INTR_ENABLE);
+ switch (alarm) {
+ case THROTTLE_OC1:
+ r = REG_SET_MASK(r, OC_INTR_OC1_MASK, 1);
+ break;
+ case THROTTLE_OC2:
+ r = REG_SET_MASK(r, OC_INTR_OC2_MASK, 1);
+ break;
+ case THROTTLE_OC3:
+ r = REG_SET_MASK(r, OC_INTR_OC3_MASK, 1);
+ break;
+ case THROTTLE_OC4:
+ r = REG_SET_MASK(r, OC_INTR_OC4_MASK, 1);
+ break;
+ default:
+ r = 0;
+ break;
+ }
+ writel(r, ts->regs + OC_INTR_ENABLE);
+}
+
+/**
+ * soctherm_handle_alarm() - Handles soctherm alarms
+ * @alarm: The soctherm throttle id
+ *
+ * "Handles" over-current alarms (OC1, OC2, OC3, and OC4) by printing
+ * a warning or informative message.
+ *
+ * Return: -EINVAL for @alarm = THROTTLE_OC3, otherwise 0 (success).
+ */
+static int soctherm_handle_alarm(enum soctherm_throttle_id alarm)
+{
+ int rv = -EINVAL;
+
+ switch (alarm) {
+ case THROTTLE_OC1:
+ pr_debug("soctherm: Successfully handled OC1 alarm\n");
+ rv = 0;
+ break;
+
+ case THROTTLE_OC2:
+ pr_debug("soctherm: Successfully handled OC2 alarm\n");
+ rv = 0;
+ break;
+
+ case THROTTLE_OC3:
+ pr_debug("soctherm: Successfully handled OC3 alarm\n");
+ rv = 0;
+ break;
+
+ case THROTTLE_OC4:
+ pr_debug("soctherm: Successfully handled OC4 alarm\n");
+ rv = 0;
+ break;
+
+ default:
+ break;
+ }
+
+ if (rv)
+ pr_err("soctherm: ERROR in handling %s alarm\n",
+ throt_names[alarm]);
+
+ return rv;
+}
+
+/**
+ * soctherm_edp_isr_thread() - log an over-current interrupt request
+ * @irq: OC irq number. Currently not being used. See description
+ * @arg: a void pointer for callback, currently not being used
+ *
+ * Over-current events are handled in hardware. This function is called to log
+ * and handle any OC events that happened. Additionally, it checks every
+ * over-current interrupt registers for registers are set but
+ * was not expected (i.e. any discrepancy in interrupt status) by the function,
+ * the discrepancy will logged.
+ *
+ * Return: %IRQ_HANDLED
+ */
+static irqreturn_t soctherm_edp_isr_thread(int irq, void *arg)
+{
+ struct tegra_soctherm *ts = arg;
+ u32 st, ex, oc1, oc2, oc3, oc4;
+
+ st = readl(ts->regs + OC_INTR_STATUS);
+
+ /* deliberately clear expected interrupts handled in SW */
+ oc1 = st & OC_INTR_OC1_MASK;
+ oc2 = st & OC_INTR_OC2_MASK;
+ oc3 = st & OC_INTR_OC3_MASK;
+ oc4 = st & OC_INTR_OC4_MASK;
+ ex = oc1 | oc2 | oc3 | oc4;
+
+ pr_err("soctherm: OC ALARM 0x%08x\n", ex);
+ if (ex) {
+ writel(st, ts->regs + OC_INTR_STATUS);
+ st &= ~ex;
+
+ if (oc1 && !soctherm_handle_alarm(THROTTLE_OC1))
+ soctherm_oc_intr_enable(ts, THROTTLE_OC1, true);
+
+ if (oc2 && !soctherm_handle_alarm(THROTTLE_OC2))
+ soctherm_oc_intr_enable(ts, THROTTLE_OC2, true);
+
+ if (oc3 && !soctherm_handle_alarm(THROTTLE_OC3))
+ soctherm_oc_intr_enable(ts, THROTTLE_OC3, true);
+
+ if (oc4 && !soctherm_handle_alarm(THROTTLE_OC4))
+ soctherm_oc_intr_enable(ts, THROTTLE_OC4, true);
+
+ if (oc1 && soc_irq_cdata.irq_enable & BIT(0))
+ handle_nested_irq(
+ irq_find_mapping(soc_irq_cdata.domain, 0));
+
+ if (oc2 && soc_irq_cdata.irq_enable & BIT(1))
+ handle_nested_irq(
+ irq_find_mapping(soc_irq_cdata.domain, 1));
+
+ if (oc3 && soc_irq_cdata.irq_enable & BIT(2))
+ handle_nested_irq(
+ irq_find_mapping(soc_irq_cdata.domain, 2));
+
+ if (oc4 && soc_irq_cdata.irq_enable & BIT(3))
+ handle_nested_irq(
+ irq_find_mapping(soc_irq_cdata.domain, 3));
+ }
+
+ if (st) {
+ pr_err("soctherm: Ignored unexpected OC ALARM 0x%08x\n", st);
+ writel(st, ts->regs + OC_INTR_STATUS);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * soctherm_edp_isr() - Disables any active interrupts
+ * @irq: The interrupt request number
+ * @arg: Opaque pointer to an argument
+ *
+ * Writes to the OC_INTR_DISABLE register the over current interrupt status,
+ * masking any asserted interrupts. Doing this prevents the same interrupts
+ * from triggering this isr repeatedly. The thread woken by this isr will
+ * handle asserted interrupts and subsequently unmask/re-enable them.
+ *
+ * The OC_INTR_DISABLE register indicates which OC interrupts
+ * have been disabled.
+ *
+ * Return: %IRQ_WAKE_THREAD, handler requests to wake the handler thread
+ */
+static irqreturn_t soctherm_edp_isr(int irq, void *arg)
+{
+ struct tegra_soctherm *ts = arg;
+ u32 r;
+
+ if (!ts)
+ return IRQ_NONE;
+
+ r = readl(ts->regs + OC_INTR_STATUS);
+ writel(r, ts->regs + OC_INTR_DISABLE);
+
+ return IRQ_WAKE_THREAD;
+}
+
+/**
+ * soctherm_oc_irq_lock() - locks the over-current interrupt request
+ * @data: Interrupt request data
+ *
+ * Looks up the chip data from @data and locks the mutex associated with
+ * a particular over-current interrupt request.
+ */
+static void soctherm_oc_irq_lock(struct irq_data *data)
+{
+ struct soctherm_oc_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+
+ mutex_lock(&d->irq_lock);
+}
+
+/**
+ * soctherm_oc_irq_sync_unlock() - Unlocks the OC interrupt request
+ * @data: Interrupt request data
+ *
+ * Looks up the interrupt request data @data and unlocks the mutex associated
+ * with a particular over-current interrupt request.
+ */
+static void soctherm_oc_irq_sync_unlock(struct irq_data *data)
+{
+ struct soctherm_oc_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+
+ mutex_unlock(&d->irq_lock);
+}
+
+/**
+ * soctherm_oc_irq_enable() - Enables the SOC_THERM over-current interrupt queue
+ * @data: irq_data structure of the chip
+ *
+ * Sets the irq_enable bit of SOC_THERM allowing SOC_THERM
+ * to respond to over-current interrupts.
+ *
+ */
+static void soctherm_oc_irq_enable(struct irq_data *data)
+{
+ struct soctherm_oc_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+
+ d->irq_enable |= BIT(data->hwirq);
+}
+
+/**
+ * soctherm_oc_irq_disable() - Disables overcurrent interrupt requests
+ * @irq_data: The interrupt request information
+ *
+ * Clears the interrupt request enable bit of the overcurrent
+ * interrupt request chip data.
+ *
+ * Return: Nothing is returned (void)
+ */
+static void soctherm_oc_irq_disable(struct irq_data *data)
+{
+ struct soctherm_oc_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+
+ d->irq_enable &= ~BIT(data->hwirq);
+}
+
+static int soctherm_oc_irq_set_type(struct irq_data *data, unsigned int type)
+{
+ return 0;
+}
+
+/**
+ * soctherm_oc_irq_map() - SOC_THERM interrupt request domain mapper
+ * @h: Interrupt request domain
+ * @virq: Virtual interrupt request number
+ * @hw: Hardware interrupt request number
+ *
+ * Mapping callback function for SOC_THERM's irq_domain. When a SOC_THERM
+ * interrupt request is called, the irq_domain takes the request's virtual
+ * request number (much like a virtual memory address) and maps it to a
+ * physical hardware request number.
+ *
+ * When a mapping doesn't already exist for a virtual request number, the
+ * irq_domain calls this function to associate the virtual request number with
+ * a hardware request number.
+ *
+ * Return: 0
+ */
+static int soctherm_oc_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct soctherm_oc_irq_chip_data *data = h->host_data;
+
+ irq_set_chip_data(virq, data);
+ irq_set_chip(virq, &data->irq_chip);
+ irq_set_nested_thread(virq, 1);
+ return 0;
+}
+
+/**
+ * soctherm_irq_domain_xlate_twocell() - xlate for soctherm interrupts
+ * @d: Interrupt request domain
+ * @intspec: Array of u32s from DTs "interrupt" property
+ * @intsize: Number of values inside the intspec array
+ * @out_hwirq: HW IRQ value associated with this interrupt
+ * @out_type: The IRQ SENSE type for this interrupt.
+ *
+ * This Device Tree IRQ specifier translation function will translate a
+ * specific "interrupt" as defined by 2 DT values where the cell values map
+ * the hwirq number + 1 and linux irq flags. Since the output is the hwirq
+ * number, this function will subtract 1 from the value listed in DT.
+ *
+ * Return: 0
+ */
+static int soctherm_irq_domain_xlate_twocell(struct irq_domain *d,
+ struct device_node *ctrlr, const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_type)
+{
+ if (WARN_ON(intsize < 2))
+ return -EINVAL;
+
+ /*
+ * The HW value is 1 index less than the DT IRQ values.
+ * i.e. OC4 goes to HW index 3.
+ */
+ *out_hwirq = intspec[0] - 1;
+ *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
+ return 0;
+}
+
+static const struct irq_domain_ops soctherm_oc_domain_ops = {
+ .map = soctherm_oc_irq_map,
+ .xlate = soctherm_irq_domain_xlate_twocell,
+};
+
+/**
+ * soctherm_oc_int_init() - Initial enabling of the over
+ * current interrupts
+ * @np: The devicetree node for soctherm
+ * @num_irqs: The number of new interrupt requests
+ *
+ * Sets the over current interrupt request chip data
+ *
+ * Return: 0 on success or if overcurrent interrupts are not enabled,
+ * -ENOMEM (out of memory), or irq_base if the function failed to
+ * allocate the irqs
+ */
+static int soctherm_oc_int_init(struct device_node *np, int num_irqs)
+{
+ if (!num_irqs) {
+ pr_info("%s(): OC interrupts are not enabled\n", __func__);
+ return 0;
+ }
+
+ mutex_init(&soc_irq_cdata.irq_lock);
+ soc_irq_cdata.irq_enable = 0;
+
+ soc_irq_cdata.irq_chip.name = "soc_therm_oc";
+ soc_irq_cdata.irq_chip.irq_bus_lock = soctherm_oc_irq_lock;
+ soc_irq_cdata.irq_chip.irq_bus_sync_unlock =
+ soctherm_oc_irq_sync_unlock;
+ soc_irq_cdata.irq_chip.irq_disable = soctherm_oc_irq_disable;
+ soc_irq_cdata.irq_chip.irq_enable = soctherm_oc_irq_enable;
+ soc_irq_cdata.irq_chip.irq_set_type = soctherm_oc_irq_set_type;
+ soc_irq_cdata.irq_chip.irq_set_wake = NULL;
+
+ soc_irq_cdata.domain = irq_domain_add_linear(np, num_irqs,
+ &soctherm_oc_domain_ops,
+ &soc_irq_cdata);
+
+ if (!soc_irq_cdata.domain) {
+ pr_err("%s: Failed to create IRQ domain\n", __func__);
+ return -ENOMEM;
+ }
+
+ pr_debug("%s(): OC interrupts enabled successful\n", __func__);
+ return 0;
+}
+
#ifdef CONFIG_DEBUG_FS
static int regs_show(struct seq_file *s, void *data)
{
@@ -929,6 +1574,120 @@ static const struct thermal_cooling_device_ops throt_cooling_ops = {
.set_cur_state = throt_set_cdev_state,
};
+static int soctherm_thermtrips_parse(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct tegra_soctherm *ts = dev_get_drvdata(dev);
+ struct tsensor_group_thermtrips *tt = ts->soc->thermtrips;
+ const int max_num_prop = ts->soc->num_ttgs * 2;
+ u32 *tlb;
+ int i, j, n, ret;
+
+ if (!tt)
+ return -ENOMEM;
+
+ n = of_property_count_u32_elems(dev->of_node, "nvidia,thermtrips");
+ if (n <= 0) {
+ dev_info(dev,
+ "missing thermtrips, will use critical trips as shut down temp\n");
+ return n;
+ }
+
+ n = min(max_num_prop, n);
+
+ tlb = devm_kcalloc(&pdev->dev, max_num_prop, sizeof(u32), GFP_KERNEL);
+ if (!tlb)
+ return -ENOMEM;
+ ret = of_property_read_u32_array(dev->of_node, "nvidia,thermtrips",
+ tlb, n);
+ if (ret) {
+ dev_err(dev, "invalid num ele: thermtrips:%d\n", ret);
+ return ret;
+ }
+
+ i = 0;
+ for (j = 0; j < n; j = j + 2) {
+ if (tlb[j] >= TEGRA124_SOCTHERM_SENSOR_NUM)
+ continue;
+
+ tt[i].id = tlb[j];
+ tt[i].temp = tlb[j + 1];
+ i++;
+ }
+
+ return 0;
+}
+
+static void soctherm_oc_cfg_parse(struct device *dev,
+ struct device_node *np_oc,
+ struct soctherm_throt_cfg *stc)
+{
+ u32 val;
+
+ if (of_property_read_bool(np_oc, "nvidia,polarity-active-low"))
+ stc->oc_cfg.active_low = 1;
+ else
+ stc->oc_cfg.active_low = 0;
+
+ if (!of_property_read_u32(np_oc, "nvidia,count-threshold", &val)) {
+ stc->oc_cfg.intr_en = 1;
+ stc->oc_cfg.alarm_cnt_thresh = val;
+ }
+
+ if (!of_property_read_u32(np_oc, "nvidia,throttle-period-us", &val))
+ stc->oc_cfg.throt_period = val;
+
+ if (!of_property_read_u32(np_oc, "nvidia,alarm-filter", &val))
+ stc->oc_cfg.alarm_filter = val;
+
+ /* BRIEF throttling by default, do not support STICKY */
+ stc->oc_cfg.mode = OC_THROTTLE_MODE_BRIEF;
+}
+
+static int soctherm_throt_cfg_parse(struct device *dev,
+ struct device_node *np,
+ struct soctherm_throt_cfg *stc)
+{
+ struct tegra_soctherm *ts = dev_get_drvdata(dev);
+ int ret;
+ u32 val;
+
+ ret = of_property_read_u32(np, "nvidia,priority", &val);
+ if (ret) {
+ dev_err(dev, "throttle-cfg: %s: invalid priority\n", stc->name);
+ return -EINVAL;
+ }
+ stc->priority = val;
+
+ ret = of_property_read_u32(np, ts->soc->use_ccroc ?
+ "nvidia,cpu-throt-level" :
+ "nvidia,cpu-throt-percent", &val);
+ if (!ret) {
+ if (ts->soc->use_ccroc &&
+ val <= TEGRA_SOCTHERM_THROT_LEVEL_HIGH)
+ stc->cpu_throt_level = val;
+ else if (!ts->soc->use_ccroc && val <= 100)
+ stc->cpu_throt_depth = val;
+ else
+ goto err;
+ } else {
+ goto err;
+ }
+
+ ret = of_property_read_u32(np, "nvidia,gpu-throt-level", &val);
+ if (!ret && val <= TEGRA_SOCTHERM_THROT_LEVEL_HIGH)
+ stc->gpu_throt_level = val;
+ else
+ goto err;
+
+ return 0;
+
+err:
+ dev_err(dev, "throttle-cfg: %s: no throt prop or invalid prop\n",
+ stc->name);
+ return -EINVAL;
+}
+
/**
* soctherm_init_hw_throt_cdev() - Parse the HW throttle configurations
* and register them as cooling devices.
@@ -939,8 +1698,7 @@ static void soctherm_init_hw_throt_cdev(struct platform_device *pdev)
struct tegra_soctherm *ts = dev_get_drvdata(dev);
struct device_node *np_stc, *np_stcc;
const char *name;
- u32 val;
- int i, r;
+ int i;
for (i = 0; i < THROTTLE_SIZE; i++) {
ts->throt_cfgs[i].name = throt_names[i];
@@ -958,6 +1716,7 @@ static void soctherm_init_hw_throt_cdev(struct platform_device *pdev)
for_each_child_of_node(np_stc, np_stcc) {
struct soctherm_throt_cfg *stc;
struct thermal_cooling_device *tcd;
+ int err;
name = np_stcc->name;
stc = find_throttle_cfg_by_name(ts, name);
@@ -967,51 +1726,34 @@ static void soctherm_init_hw_throt_cdev(struct platform_device *pdev)
continue;
}
- r = of_property_read_u32(np_stcc, "nvidia,priority", &val);
- if (r) {
- dev_info(dev,
- "throttle-cfg: %s: missing priority\n", name);
- continue;
+ if (stc->init) {
+ dev_err(dev, "throttle-cfg: %s: redefined!\n", name);
+ of_node_put(np_stcc);
+ break;
}
- stc->priority = val;
-
- if (ts->soc->use_ccroc) {
- r = of_property_read_u32(np_stcc,
- "nvidia,cpu-throt-level",
- &val);
- if (r) {
- dev_info(dev,
- "throttle-cfg: %s: missing cpu-throt-level\n",
- name);
- continue;
- }
- stc->cpu_throt_level = val;
+
+ err = soctherm_throt_cfg_parse(dev, np_stcc, stc);
+ if (err)
+ continue;
+
+ if (stc->id >= THROTTLE_OC1) {
+ soctherm_oc_cfg_parse(dev, np_stcc, stc);
+ stc->init = true;
} else {
- r = of_property_read_u32(np_stcc,
- "nvidia,cpu-throt-percent",
- &val);
- if (r) {
- dev_info(dev,
- "throttle-cfg: %s: missing cpu-throt-percent\n",
- name);
- continue;
- }
- stc->cpu_throt_depth = val;
- }
- tcd = thermal_of_cooling_device_register(np_stcc,
+ tcd = thermal_of_cooling_device_register(np_stcc,
(char *)name, ts,
&throt_cooling_ops);
- of_node_put(np_stcc);
- if (IS_ERR_OR_NULL(tcd)) {
- dev_err(dev,
- "throttle-cfg: %s: failed to register cooling device\n",
- name);
- continue;
+ if (IS_ERR_OR_NULL(tcd)) {
+ dev_err(dev,
+ "throttle-cfg: %s: failed to register cooling device\n",
+ name);
+ continue;
+ }
+ stc->cdev = tcd;
+ stc->init = true;
}
- stc->cdev = tcd;
- stc->init = true;
}
of_node_put(np_stc);
@@ -1140,6 +1882,50 @@ static void throttlectl_cpu_mn(struct tegra_soctherm *ts,
writel(r, ts->regs + THROT_PSKIP_RAMP(throt, THROTTLE_DEV_CPU));
}
+/**
+ * throttlectl_gpu_level_select() - selects throttling level for GPU
+ * @throt: the LIGHT/HEAVY of throttle event id
+ *
+ * This function programs soctherm's interface to GK20a NV_THERM to select
+ * pre-configured "Low", "Medium" or "Heavy" throttle levels.
+ *
+ * Return: boolean true if HW was programmed
+ */
+static void throttlectl_gpu_level_select(struct tegra_soctherm *ts,
+ enum soctherm_throttle_id throt)
+{
+ u32 r, level, throt_vect;
+
+ level = ts->throt_cfgs[throt].gpu_throt_level;
+ throt_vect = THROT_LEVEL_TO_DEPTH(level);
+ r = readl(ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_GPU));
+ r = REG_SET_MASK(r, THROT_PSKIP_CTRL_ENABLE_MASK, 1);
+ r = REG_SET_MASK(r, THROT_PSKIP_CTRL_VECT_GPU_MASK, throt_vect);
+ writel(r, ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_GPU));
+}
+
+static int soctherm_oc_cfg_program(struct tegra_soctherm *ts,
+ enum soctherm_throttle_id throt)
+{
+ u32 r;
+ struct soctherm_oc_cfg *oc = &ts->throt_cfgs[throt].oc_cfg;
+
+ if (oc->mode == OC_THROTTLE_MODE_DISABLED)
+ return -EINVAL;
+
+ r = REG_SET_MASK(0, OC1_CFG_HW_RESTORE_MASK, 1);
+ r = REG_SET_MASK(r, OC1_CFG_THROTTLE_MODE_MASK, oc->mode);
+ r = REG_SET_MASK(r, OC1_CFG_ALARM_POLARITY_MASK, oc->active_low);
+ r = REG_SET_MASK(r, OC1_CFG_EN_THROTTLE_MASK, 1);
+ writel(r, ts->regs + ALARM_CFG(throt));
+ writel(oc->throt_period, ts->regs + ALARM_THROTTLE_PERIOD(throt));
+ writel(oc->alarm_cnt_thresh, ts->regs + ALARM_CNT_THRESHOLD(throt));
+ writel(oc->alarm_filter, ts->regs + ALARM_FILTER(throt));
+ soctherm_oc_intr_enable(ts, throt, oc->intr_en);
+
+ return 0;
+}
+
/**
* soctherm_throttle_program() - programs pulse skippers' configuration
* @throt: the LIGHT/HEAVY of the throttle event id.
@@ -1156,12 +1942,17 @@ static void soctherm_throttle_program(struct tegra_soctherm *ts,
if (!stc.init)
return;
+ if ((throt >= THROTTLE_OC1) && (soctherm_oc_cfg_program(ts, throt)))
+ return;
+
/* Setup PSKIP parameters */
if (ts->soc->use_ccroc)
throttlectl_cpu_level_select(ts, throt);
else
throttlectl_cpu_mn(ts, throt);
+ throttlectl_gpu_level_select(ts, throt);
+
r = REG_SET_MASK(0, THROT_PRIORITY_LITE_PRIO_MASK, stc.priority);
writel(r, ts->regs + THROT_PRIORITY_CTRL(throt));
@@ -1215,6 +2006,57 @@ static void tegra_soctherm_throttle(struct device *dev)
writel(v, ts->regs + THERMCTL_STATS_CTL);
}
+static int soctherm_interrupts_init(struct platform_device *pdev,
+ struct tegra_soctherm *tegra)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ ret = soctherm_oc_int_init(np, TEGRA_SOC_OC_IRQ_MAX);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "soctherm_oc_int_init failed\n");
+ return ret;
+ }
+
+ tegra->thermal_irq = platform_get_irq(pdev, 0);
+ if (tegra->thermal_irq < 0) {
+ dev_dbg(&pdev->dev, "get 'thermal_irq' failed.\n");
+ return 0;
+ }
+
+ tegra->edp_irq = platform_get_irq(pdev, 1);
+ if (tegra->edp_irq < 0) {
+ dev_dbg(&pdev->dev, "get 'edp_irq' failed.\n");
+ return 0;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev,
+ tegra->thermal_irq,
+ soctherm_thermal_isr,
+ soctherm_thermal_isr_thread,
+ IRQF_ONESHOT,
+ dev_name(&pdev->dev),
+ tegra);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "request_irq 'thermal_irq' failed.\n");
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev,
+ tegra->edp_irq,
+ soctherm_edp_isr,
+ soctherm_edp_isr_thread,
+ IRQF_ONESHOT,
+ "soctherm_edp",
+ tegra);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "request_irq 'edp_irq' failed.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
static void soctherm_init(struct platform_device *pdev)
{
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
@@ -1292,6 +2134,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
if (!tegra)
return -ENOMEM;
+ mutex_init(&tegra->thermctl_lock);
dev_set_drvdata(&pdev->dev, tegra);
tegra->soc = soc;
@@ -1370,6 +2213,8 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
if (err)
return err;
+ soctherm_thermtrips_parse(pdev);
+
soctherm_init_hw_throt_cdev(pdev);
soctherm_init(pdev);
@@ -1406,6 +2251,8 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
goto disable_clocks;
}
+ err = soctherm_interrupts_init(pdev, tegra);
+
soctherm_debug_init(pdev);
return 0;
diff --git a/drivers/thermal/tegra/soctherm.h b/drivers/thermal/tegra/soctherm.h
index e96ca73fd780bd0a47918df573312ba8ee97def6..70501e73d586230d3caca8dea0966afd7f23142a 100644
--- a/drivers/thermal/tegra/soctherm.h
+++ b/drivers/thermal/tegra/soctherm.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
*
@@ -29,6 +30,14 @@
#define THERMCTL_THERMTRIP_CTL 0x80
/* BITs are defined in device file */
+#define THERMCTL_INTR_ENABLE 0x88
+#define THERMCTL_INTR_DISABLE 0x8c
+#define TH_INTR_UP_DN_EN 0x3
+#define THERM_IRQ_MEM_MASK (TH_INTR_UP_DN_EN << 24)
+#define THERM_IRQ_GPU_MASK (TH_INTR_UP_DN_EN << 16)
+#define THERM_IRQ_CPU_MASK (TH_INTR_UP_DN_EN << 8)
+#define THERM_IRQ_TSENSE_MASK (TH_INTR_UP_DN_EN << 0)
+
#define SENSOR_PDIV 0x1c0
#define SENSOR_PDIV_CPU_MASK (0xf << 12)
#define SENSOR_PDIV_GPU_MASK (0xf << 8)
@@ -70,6 +79,7 @@ struct tegra_tsensor_group {
u32 thermtrip_enable_mask;
u32 thermtrip_any_en_mask;
u32 thermtrip_threshold_mask;
+ u32 thermctl_isr_mask;
u16 thermctl_lvl0_offset;
u32 thermctl_lvl0_up_thresh_mask;
u32 thermctl_lvl0_dn_thresh_mask;
@@ -92,6 +102,11 @@ struct tegra_tsensor {
const struct tegra_tsensor_group *group;
};
+struct tsensor_group_thermtrips {
+ u8 id;
+ u32 temp;
+};
+
struct tegra_soctherm_fuse {
u32 fuse_base_cp_mask, fuse_base_cp_shift;
u32 fuse_base_ft_mask, fuse_base_ft_shift;
@@ -113,6 +128,7 @@ struct tegra_soctherm_soc {
const int thresh_grain;
const unsigned int bptt;
const bool use_ccroc;
+ struct tsensor_group_thermtrips *thermtrips;
};
int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse,
diff --git a/drivers/thermal/tegra/tegra124-soctherm.c b/drivers/thermal/tegra/tegra124-soctherm.c
index 36768630f78c9f435a8961d74a3125dd6dec2a1f..20ad27f4d1a161d419a19f3406a494d08b31542d 100644
--- a/drivers/thermal/tegra/tegra124-soctherm.c
+++ b/drivers/thermal/tegra/tegra124-soctherm.c
@@ -1,5 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2014-2018, NVIDIA CORPORATION. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -55,6 +56,7 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_cpu = {
.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA124_THERMTRIP_CPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA124_THERMTRIP_CPU_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_CPU_MASK,
.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU,
.thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
.thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
@@ -73,6 +75,7 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = {
.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA124_THERMTRIP_GPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_GPU_MASK,
.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU,
.thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
.thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
@@ -89,6 +92,7 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_pll = {
.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA124_THERMTRIP_TSENSE_EN_MASK,
.thermtrip_threshold_mask = TEGRA124_THERMTRIP_TSENSE_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_TSENSE_MASK,
.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE,
.thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
.thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
@@ -107,6 +111,7 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_mem = {
.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA124_THERMTRIP_MEM_EN_MASK,
.thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_MEM_MASK,
.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM,
.thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
.thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
diff --git a/drivers/thermal/tegra/tegra132-soctherm.c b/drivers/thermal/tegra/tegra132-soctherm.c
index 97fa30501eb19eeec32c05c7365e4f7ab9a8af3f..b76308fdad9e26820261e0f62c56a357d1f576fb 100644
--- a/drivers/thermal/tegra/tegra132-soctherm.c
+++ b/drivers/thermal/tegra/tegra132-soctherm.c
@@ -1,5 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2014-2018, NVIDIA CORPORATION. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -55,6 +56,7 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_cpu = {
.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA132_THERMTRIP_CPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA132_THERMTRIP_CPU_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_CPU_MASK,
.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU,
.thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
.thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
@@ -73,6 +75,7 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_gpu = {
.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA132_THERMTRIP_GPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_GPU_MASK,
.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU,
.thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
.thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
@@ -89,6 +92,7 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_pll = {
.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA132_THERMTRIP_TSENSE_EN_MASK,
.thermtrip_threshold_mask = TEGRA132_THERMTRIP_TSENSE_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_TSENSE_MASK,
.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE,
.thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
.thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
@@ -107,6 +111,7 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_mem = {
.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA132_THERMTRIP_MEM_EN_MASK,
.thermtrip_threshold_mask = TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_MEM_MASK,
.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM,
.thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
.thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
diff --git a/drivers/thermal/tegra/tegra210-soctherm.c b/drivers/thermal/tegra/tegra210-soctherm.c
index ad53169a8e955718783d56a27f32cc2bf4015f28..d31b50050faa0d107d20d9e282f0accc72a3db45 100644
--- a/drivers/thermal/tegra/tegra210-soctherm.c
+++ b/drivers/thermal/tegra/tegra210-soctherm.c
@@ -1,5 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2014-2018, NVIDIA CORPORATION. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -56,6 +57,7 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_cpu = {
.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA210_THERMTRIP_CPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA210_THERMTRIP_CPU_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_CPU_MASK,
.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU,
.thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
.thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
@@ -74,6 +76,7 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_gpu = {
.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA210_THERMTRIP_GPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_GPU_MASK,
.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU,
.thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
.thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
@@ -90,6 +93,7 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_pll = {
.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA210_THERMTRIP_TSENSE_EN_MASK,
.thermtrip_threshold_mask = TEGRA210_THERMTRIP_TSENSE_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_TSENSE_MASK,
.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE,
.thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
.thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
@@ -108,6 +112,7 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_mem = {
.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA210_THERMTRIP_MEM_EN_MASK,
.thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_MEM_MASK,
.thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM,
.thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
.thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
@@ -203,6 +208,13 @@ static const struct tegra_soctherm_fuse tegra210_soctherm_fuse = {
.fuse_spare_realignment = 0,
};
+struct tsensor_group_thermtrips tegra210_tsensor_thermtrips[] = {
+ {.id = TEGRA124_SOCTHERM_SENSOR_NUM},
+ {.id = TEGRA124_SOCTHERM_SENSOR_NUM},
+ {.id = TEGRA124_SOCTHERM_SENSOR_NUM},
+ {.id = TEGRA124_SOCTHERM_SENSOR_NUM},
+};
+
const struct tegra_soctherm_soc tegra210_soctherm = {
.tsensors = tegra210_tsensors,
.num_tsensors = ARRAY_SIZE(tegra210_tsensors),
@@ -212,4 +224,5 @@ const struct tegra_soctherm_soc tegra210_soctherm = {
.thresh_grain = TEGRA210_THRESH_GRAIN,
.bptt = TEGRA210_BPTT,
.use_ccroc = false,
+ .thermtrips = tegra210_tsensor_thermtrips,
};
diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c
index e22fc60ad36dcf7e3b36321cab50c85b7e73079a..deb244f12de41324fe17d28b970414d84910dbbf 100644
--- a/drivers/thermal/thermal-generic-adc.c
+++ b/drivers/thermal/thermal-generic-adc.c
@@ -29,6 +29,9 @@ static int gadc_thermal_adc_to_temp(struct gadc_thermal_info *gti, int val)
int temp, temp_hi, temp_lo, adc_hi, adc_lo;
int i;
+ if (!gti->lookup_table)
+ return val;
+
for (i = 0; i < gti->nlookup_table; i++) {
if (val >= gti->lookup_table[2 * i + 1])
break;
@@ -81,9 +84,9 @@ static int gadc_thermal_read_linear_lookup_table(struct device *dev,
ntable = of_property_count_elems_of_size(np, "temperature-lookup-table",
sizeof(u32));
- if (ntable < 0) {
- dev_err(dev, "Lookup table is not provided\n");
- return ntable;
+ if (ntable <= 0) {
+ dev_notice(dev, "no lookup table, assuming DAC channel returns milliCelcius\n");
+ return 0;
}
if (ntable % 2) {
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 6590bb5cb6885e4d2d0af88e3aa741cc24bd7745..e0b530603db6a100a1343f22bbada1aa629911be 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -1046,6 +1046,55 @@ thermal_of_cooling_device_register(struct device_node *np,
}
EXPORT_SYMBOL_GPL(thermal_of_cooling_device_register);
+static void thermal_cooling_device_release(struct device *dev, void *res)
+{
+ thermal_cooling_device_unregister(
+ *(struct thermal_cooling_device **)res);
+}
+
+/**
+ * devm_thermal_of_cooling_device_register() - register an OF thermal cooling
+ * device
+ * @dev: a valid struct device pointer of a sensor device.
+ * @np: a pointer to a device tree node.
+ * @type: the thermal cooling device type.
+ * @devdata: device private data.
+ * @ops: standard thermal cooling devices callbacks.
+ *
+ * This function will register a cooling device with device tree node reference.
+ * This interface function adds a new thermal cooling device (fan/processor/...)
+ * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+ * to all the thermal zone devices registered at the same time.
+ *
+ * Return: a pointer to the created struct thermal_cooling_device or an
+ * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
+ */
+struct thermal_cooling_device *
+devm_thermal_of_cooling_device_register(struct device *dev,
+ struct device_node *np,
+ char *type, void *devdata,
+ const struct thermal_cooling_device_ops *ops)
+{
+ struct thermal_cooling_device **ptr, *tcd;
+
+ ptr = devres_alloc(thermal_cooling_device_release, sizeof(*ptr),
+ GFP_KERNEL);
+ if (!ptr)
+ return ERR_PTR(-ENOMEM);
+
+ tcd = __thermal_cooling_device_register(np, type, devdata, ops);
+ if (IS_ERR(tcd)) {
+ devres_free(ptr);
+ return tcd;
+ }
+
+ *ptr = tcd;
+ devres_add(dev, ptr);
+
+ return tcd;
+}
+EXPORT_SYMBOL_GPL(devm_thermal_of_cooling_device_register);
+
static void __unbind(struct thermal_zone_device *tz, int mask,
struct thermal_cooling_device *cdev)
{
diff --git a/drivers/thermal/thermal_mmio.c b/drivers/thermal/thermal_mmio.c
new file mode 100644
index 0000000000000000000000000000000000000000..de3cceea23bc6372b325086bcf46be9105cd9f74
--- /dev/null
+++ b/drivers/thermal/thermal_mmio.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+struct thermal_mmio {
+ void __iomem *mmio_base;
+ u32 (*read_mmio)(void __iomem *mmio_base);
+ u32 mask;
+ int factor;
+};
+
+static u32 thermal_mmio_readb(void __iomem *mmio_base)
+{
+ return readb(mmio_base);
+}
+
+static int thermal_mmio_get_temperature(void *private, int *temp)
+{
+ int t;
+ struct thermal_mmio *sensor =
+ (struct thermal_mmio *)private;
+
+ t = sensor->read_mmio(sensor->mmio_base) & sensor->mask;
+ t *= sensor->factor;
+
+ *temp = t;
+
+ return 0;
+}
+
+static struct thermal_zone_of_device_ops thermal_mmio_ops = {
+ .get_temp = thermal_mmio_get_temperature,
+};
+
+static int thermal_mmio_probe(struct platform_device *pdev)
+{
+ struct resource *resource;
+ struct thermal_mmio *sensor;
+ int (*sensor_init_func)(struct platform_device *pdev,
+ struct thermal_mmio *sensor);
+ struct thermal_zone_device *thermal_zone;
+ int ret;
+ int temperature;
+
+ sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
+ if (!sensor)
+ return -ENOMEM;
+
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (IS_ERR(resource)) {
+ dev_err(&pdev->dev,
+ "fail to get platform memory resource (%ld)\n",
+ PTR_ERR(resource));
+ return PTR_ERR(resource);
+ }
+
+ sensor->mmio_base = devm_ioremap_resource(&pdev->dev, resource);
+ if (IS_ERR(sensor->mmio_base)) {
+ dev_err(&pdev->dev, "failed to ioremap memory (%ld)\n",
+ PTR_ERR(sensor->mmio_base));
+ return PTR_ERR(sensor->mmio_base);
+ }
+
+ sensor_init_func = device_get_match_data(&pdev->dev);
+ if (sensor_init_func) {
+ ret = sensor_init_func(pdev, sensor);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to initialize sensor (%d)\n",
+ ret);
+ return ret;
+ }
+ }
+
+ thermal_zone = devm_thermal_zone_of_sensor_register(&pdev->dev,
+ 0,
+ sensor,
+ &thermal_mmio_ops);
+ if (IS_ERR(thermal_zone)) {
+ dev_err(&pdev->dev,
+ "failed to register sensor (%ld)\n",
+ PTR_ERR(thermal_zone));
+ return PTR_ERR(thermal_zone);
+ }
+
+ thermal_mmio_get_temperature(sensor, &temperature);
+ dev_info(&pdev->dev,
+ "thermal mmio sensor %s registered, current temperature: %d\n",
+ pdev->name, temperature);
+
+ return 0;
+}
+
+static int al_thermal_init(struct platform_device *pdev,
+ struct thermal_mmio *sensor)
+{
+ sensor->read_mmio = thermal_mmio_readb;
+ sensor->mask = 0xff;
+ sensor->factor = 1000;
+
+ return 0;
+}
+
+static const struct of_device_id thermal_mmio_id_table[] = {
+ { .compatible = "amazon,al-thermal", .data = al_thermal_init},
+ {}
+};
+MODULE_DEVICE_TABLE(of, thermal_mmio_id_table);
+
+static struct platform_driver thermal_mmio_driver = {
+ .probe = thermal_mmio_probe,
+ .driver = {
+ .name = "thermal-mmio",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(thermal_mmio_id_table),
+ },
+};
+
+module_platform_driver(thermal_mmio_driver);
+
+MODULE_AUTHOR("Talel Shenhar <talel@amazon.com>");
+MODULE_DESCRIPTION("Thermal MMIO Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/dt-bindings/thermal/tegra124-soctherm.h b/include/dt-bindings/thermal/tegra124-soctherm.h
index c15e8b709a0de6d7a9c9dd0a042d3d956e1a27f4..444c7bdde146ed932246b11c45a1f9ff34e4c0b2 100644
--- a/include/dt-bindings/thermal/tegra124-soctherm.h
+++ b/include/dt-bindings/thermal/tegra124-soctherm.h
@@ -12,9 +12,9 @@
#define TEGRA124_SOCTHERM_SENSOR_PLLX 3
#define TEGRA124_SOCTHERM_SENSOR_NUM 4
-#define TEGRA_SOCTHERM_THROT_LEVEL_LOW 0
-#define TEGRA_SOCTHERM_THROT_LEVEL_MED 1
-#define TEGRA_SOCTHERM_THROT_LEVEL_HIGH 2
-#define TEGRA_SOCTHERM_THROT_LEVEL_NONE -1
+#define TEGRA_SOCTHERM_THROT_LEVEL_NONE 0
+#define TEGRA_SOCTHERM_THROT_LEVEL_LOW 1
+#define TEGRA_SOCTHERM_THROT_LEVEL_MED 2
+#define TEGRA_SOCTHERM_THROT_LEVEL_HIGH 3
#endif
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 5f4705f46c2f9ab8aae927304443807de8e27f4d..4a22099ed8c01fc7c152ef37b6ecc6a52582e46d 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -447,6 +447,11 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
struct thermal_cooling_device *
thermal_of_cooling_device_register(struct device_node *np, char *, void *,
const struct thermal_cooling_device_ops *);
+struct thermal_cooling_device *
+devm_thermal_of_cooling_device_register(struct device *dev,
+ struct device_node *np,
+ char *type, void *devdata,
+ const struct thermal_cooling_device_ops *ops);
void thermal_cooling_device_unregister(struct thermal_cooling_device *);
struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name);
int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
@@ -503,6 +508,14 @@ static inline struct thermal_cooling_device *
thermal_of_cooling_device_register(struct device_node *np,
char *type, void *devdata, const struct thermal_cooling_device_ops *ops)
{ return ERR_PTR(-ENODEV); }
+static inline struct thermal_cooling_device *
+devm_thermal_of_cooling_device_register(struct device *dev,
+ struct device_node *np,
+ char *type, void *devdata,
+ const struct thermal_cooling_device_ops *ops)
+{
+ return ERR_PTR(-ENODEV);
+}
static inline void thermal_cooling_device_unregister(
struct thermal_cooling_device *cdev)
{ }