From a211b8c55f3ce54423bd1daf1bca82271b08ac2f Mon Sep 17 00:00:00 2001
From: Leonard Crestez <leonard.crestez@nxp.com>
Date: Mon, 18 Jun 2018 11:15:44 +0300
Subject: [PATCH] ARM: dts: imx6qdl-sabreauto: Add sensors
The following sensors are on I2C3 on the baseboard:
* isil,isl29023 light sensor
* fsl,mag3110 magnetometer
* fsl,mma8451 accelerometer
Added under i2cmux/i2c@1 because they're not otherwise accessible.
These are all supported by iio with following configs:
* CONFIG_SENSORS_ISL29018
* CONFIG_MAG3110
* CONFIG_MMA8452
Tested with raw reads from iio sysfs.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 0e28e36ddbb2d..a59a0fd1eb022 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -155,6 +155,27 @@ max7310_c: gpio@34 {
gpio-controller;
#gpio-cells = <2>;
};
+
+ light-sensor@44 {
+ compatible = "isil,isl29023";
+ reg = <0x44>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ magnetometer@e {
+ compatible = "fsl,mag3110";
+ reg = <0x0e>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ accelerometer@1c {
+ compatible = "fsl,mma8451";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+ };
};
};
};
--
GitLab