diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index 0ec5b3f69112774f176ee1b12a185d4e5350e755..6e02448d15d951967de0972843770529e6bc3852 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -226,6 +226,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
{ "AMDI0010", APD_ADDR(wt_i2c_desc) },
{ "AMD0020", APD_ADDR(cz_uart_desc) },
{ "AMDI0020", APD_ADDR(cz_uart_desc) },
+ { "AMDI0022", APD_ADDR(cz_uart_desc) },
{ "AMD0030", },
{ "AMD0040", APD_ADDR(fch_misc_desc)},
{ "HYGO0010", APD_ADDR(wt_i2c_desc) },
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 52bb21205bb682555ba6f22ce89b2ef388f0cc79..6473361525d1f792868db6117bd7c4555845a319 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -7,6 +7,7 @@
* Copyright (C) 2001 Russell King.
*/
+#include <linux/bits.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/dmaengine.h>
@@ -70,24 +71,25 @@ struct serial8250_config {
unsigned int flags;
};
-#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */
-#define UART_CAP_EFR (1 << 9) /* UART has EFR */
-#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */
-#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */
-#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */
-#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */
-#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */
-#define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */
-#define UART_CAP_IRDA (1 << 16) /* UART supports IrDA line discipline */
-#define UART_CAP_MINI (1 << 17) /* Mini UART on BCM283X family lacks:
+#define UART_CAP_FIFO BIT(8) /* UART has FIFO */
+#define UART_CAP_EFR BIT(9) /* UART has EFR */
+#define UART_CAP_SLEEP BIT(10) /* UART has IER sleep */
+#define UART_CAP_AFE BIT(11) /* MCR-based hw flow control */
+#define UART_CAP_UUE BIT(12) /* UART needs IER bit 6 set (Xscale) */
+#define UART_CAP_RTOIE BIT(13) /* UART needs IER bit 4 set (Xscale, Tegra) */
+#define UART_CAP_HFIFO BIT(14) /* UART has a "hidden" FIFO */
+#define UART_CAP_RPM BIT(15) /* Runtime PM is active while idle */
+#define UART_CAP_IRDA BIT(16) /* UART supports IrDA line discipline */
+#define UART_CAP_MINI BIT(17) /* Mini UART on BCM283X family lacks:
* STOP PARITY EPAR SPAR WLEN5 WLEN6
*/
-#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
-#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
-#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */
-#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */
-#define UART_BUG_PARITY (1 << 4) /* UART mishandles parity if FIFO enabled */
+#define UART_BUG_QUOT BIT(0) /* UART has buggy quot LSB */
+#define UART_BUG_TXEN BIT(1) /* UART has buggy TX IIR status */
+#define UART_BUG_NOMSR BIT(2) /* UART has buggy MSR status bits (Au1x00) */
+#define UART_BUG_THRE BIT(3) /* UART has buggy THRE reassertion */
+#define UART_BUG_PARITY BIT(4) /* UART mishandles parity if FIFO enabled */
+#define UART_BUG_TXRACE BIT(5) /* UART Tx fails to set remote DR */
#ifdef CONFIG_SERIAL_8250_SHARE_IRQ
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 61550f24a2d377e45e0a2a718c659b43eab9384c..d035d08cb98714186c0143458dc90814e6b91fc2 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -437,6 +437,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
port.port.status = UPSTAT_SYNC_FIFO;
port.port.dev = &pdev->dev;
port.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
+ port.bugs |= UART_BUG_TXRACE;
rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
if (rc < 0)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 9e204f9b799a1c868a21086e32ea5f4cd272c3f2..a3a0154da567da4a37fb9cc7a8fb1ba631b64bc8 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -714,6 +714,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = {
{ "APMC0D08", 0},
{ "AMD0020", 0 },
{ "AMDI0020", 0 },
+ { "AMDI0022", 0 },
{ "BRCM2032", 0 },
{ "HISI0031", 0 },
{ },
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 689d8227f95f7dfbc04a27fa39a63f6b85eae2b7..780cc99732b6239e980072756d17c17699bfc8fa 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -56,6 +56,8 @@ struct serial_private {
int line[];
};
+#define PCI_DEVICE_ID_HPE_PCI_SERIAL 0x37e
+
static const struct pci_device_id pci_use_msi[] = {
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
0xA000, 0x1000) },
@@ -63,6 +65,8 @@ static const struct pci_device_id pci_use_msi[] = {
0xA000, 0x1000) },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
0xA000, 0x1000) },
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL,
+ PCI_ANY_ID, PCI_ANY_ID) },
{ }
};
@@ -1997,6 +2001,16 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.init = pci_hp_diva_init,
.setup = pci_hp_diva_setup,
},
+ /*
+ * HPE PCI serial device
+ */
+ {
+ .vendor = PCI_VENDOR_ID_HP_3PAR,
+ .device = PCI_DEVICE_ID_HPE_PCI_SERIAL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_hp_diva_setup,
+ },
/*
* Intel
*/
@@ -3944,21 +3958,26 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
uart.port.uartclk = board->base_baud * 16;
- if (pci_match_id(pci_use_msi, dev)) {
- dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n");
- pci_set_master(dev);
- rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (board->flags & FL_NOIRQ) {
+ uart.port.irq = 0;
} else {
- dev_dbg(&dev->dev, "Using legacy interrupts\n");
- rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
- }
- if (rc < 0) {
- kfree(priv);
- priv = ERR_PTR(rc);
- goto err_deinit;
+ if (pci_match_id(pci_use_msi, dev)) {
+ dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n");
+ pci_set_master(dev);
+ rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
+ } else {
+ dev_dbg(&dev->dev, "Using legacy interrupts\n");
+ rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
+ }
+ if (rc < 0) {
+ kfree(priv);
+ priv = ERR_PTR(rc);
+ goto err_deinit;
+ }
+
+ uart.port.irq = pci_irq_vector(dev, 0);
}
- uart.port.irq = pci_irq_vector(dev, 0);
uart.port.dev = &dev->dev;
for (i = 0; i < nr_ports; i++) {
@@ -4973,6 +4992,10 @@ static const struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_1_115200 },
+ /* HPE PCI serial device */
+ { PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_115200 },
{ PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index d45dab1ab316473d9e9af8138db33a4ec02b2316..fc5ab203228213c4b0524d59f9478db813d3f687 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1809,6 +1809,18 @@ void serial8250_tx_chars(struct uart_8250_port *up)
count = up->tx_loadsz;
do {
serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ if (up->bugs & UART_BUG_TXRACE) {
+ /*
+ * The Aspeed BMC virtual UARTs have a bug where data
+ * may get stuck in the BMC's Tx FIFO from bursts of
+ * writes on the APB interface.
+ *
+ * Delay back-to-back writes by a read cycle to avoid
+ * stalling the VUART. Read a register that won't have
+ * side-effects and discard the result.
+ */
+ serial_in(up, UART_SCR);
+ }
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
if (uart_circ_empty(xmit))
diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c
index d60abffab70eca80e450174378c50a25d8fe0861..6689d8add8f7aa66926f80cd9d316e5a4a5882e2 100644
--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -195,7 +195,6 @@ struct rp2_card {
void __iomem *bar0;
void __iomem *bar1;
spinlock_t card_lock;
- struct completion fw_loaded;
};
#define RP_ID(prod) PCI_VDEVICE(RP, (prod))
@@ -662,17 +661,10 @@ static void rp2_remove_ports(struct rp2_card *card)
card->initialized_ports = 0;
}
-static void rp2_fw_cb(const struct firmware *fw, void *context)
+static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw)
{
- struct rp2_card *card = context;
resource_size_t phys_base;
- int i, rc = -ENOENT;
-
- if (!fw) {
- dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
- RP2_FW_NAME);
- goto no_fw;
- }
+ int i, rc = 0;
phys_base = pci_resource_start(card->pdev, 1);
@@ -718,23 +710,13 @@ static void rp2_fw_cb(const struct firmware *fw, void *context)
card->initialized_ports++;
}
- release_firmware(fw);
-no_fw:
- /*
- * rp2_fw_cb() is called from a workqueue long after rp2_probe()
- * has already returned success. So if something failed here,
- * we'll just leave the now-dormant device in place until somebody
- * unbinds it.
- */
- if (rc)
- dev_warn(&card->pdev->dev, "driver initialization failed\n");
-
- complete(&card->fw_loaded);
+ return rc;
}
static int rp2_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
+ const struct firmware *fw;
struct rp2_card *card;
struct rp2_uart_port *ports;
void __iomem * const *bars;
@@ -745,7 +727,6 @@ static int rp2_probe(struct pci_dev *pdev,
return -ENOMEM;
pci_set_drvdata(pdev, card);
spin_lock_init(&card->card_lock);
- init_completion(&card->fw_loaded);
rc = pcim_enable_device(pdev);
if (rc)
@@ -778,21 +759,23 @@ static int rp2_probe(struct pci_dev *pdev,
return -ENOMEM;
card->ports = ports;
- rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
- IRQF_SHARED, DRV_NAME, card);
- if (rc)
+ rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "cannot find '%s' firmware image\n",
+ RP2_FW_NAME);
return rc;
+ }
- /*
- * Only catastrophic errors (e.g. ENOMEM) are reported here.
- * If the FW image is missing, we'll find out in rp2_fw_cb()
- * and print an error message.
- */
- rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
- GFP_KERNEL, card, rp2_fw_cb);
+ rc = rp2_load_firmware(card, fw);
+
+ release_firmware(fw);
+ if (rc < 0)
+ return rc;
+
+ rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
+ IRQF_SHARED, DRV_NAME, card);
if (rc)
return rc;
- dev_dbg(&pdev->dev, "waiting for firmware blob...\n");
return 0;
}
@@ -801,7 +784,6 @@ static void rp2_remove(struct pci_dev *pdev)
{
struct rp2_card *card = pci_get_drvdata(pdev);
- wait_for_completion(&card->fw_loaded);
rp2_remove_ports(card);
}
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index bbae072a125db880e87c19db1432017455e8fedf..222032792d6c29633904d91feaad89a90a82243f 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -338,7 +338,7 @@ static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits)
do {
lsr = tegra_uart_read(tup, UART_LSR);
- if ((lsr | UART_LSR_TEMT) && !(lsr & UART_LSR_DR))
+ if ((lsr & UART_LSR_TEMT) && !(lsr & UART_LSR_DR))
break;
udelay(1);
} while (--tmout);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 87f7127b57e6b1ca5d64414ab76bab5bb3ed9c15..18ff85a83f8067bcff0b8d3fb56acf839b19b0e6 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -863,9 +863,11 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
goto check_and_exit;
}
- retval = security_locked_down(LOCKDOWN_TIOCSSERIAL);
- if (retval && (change_irq || change_port))
- goto exit;
+ if (change_irq || change_port) {
+ retval = security_locked_down(LOCKDOWN_TIOCSSERIAL);
+ if (retval)
+ goto exit;
+ }
/*
* Ask the low level driver to verify the settings.
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index ef37fdf37612f82f1ce280d885775f3178820fe1..4baf1316ea729931eb8675e433144103eabd6c19 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1023,10 +1023,10 @@ static int scif_set_rtrg(struct uart_port *port, int rx_trig)
{
unsigned int bits;
+ if (rx_trig >= port->fifosize)
+ rx_trig = port->fifosize - 1;
if (rx_trig < 1)
rx_trig = 1;
- if (rx_trig >= port->fifosize)
- rx_trig = port->fifosize;
/* HSCIF can be set to an arbitrary level. */
if (sci_getreg(port, HSRTRGR)->size) {