From 014e79d7eccea9fe77da891fa04cde75db0af9c9 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 30 Sep 2022 13:41:15 +0200
Subject: [PATCH] cpufreq: remove s3c24xx drivers
All s3c24xx platforms were removed, so these five drivers are all
obsolete now.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/cpufreq/Kconfig.arm | 78 ---
drivers/cpufreq/Makefile | 6 -
drivers/cpufreq/s3c2410-cpufreq.c | 155 -----
drivers/cpufreq/s3c2412-cpufreq.c | 240 -------
drivers/cpufreq/s3c2416-cpufreq.c | 492 --------------
drivers/cpufreq/s3c2440-cpufreq.c | 321 ---------
drivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 163 -----
drivers/cpufreq/s3c24xx-cpufreq.c | 648 -------------------
include/linux/soc/samsung/s3c-cpufreq-core.h | 299 ---------
9 files changed, 2402 deletions(-)
delete mode 100644 drivers/cpufreq/s3c2410-cpufreq.c
delete mode 100644 drivers/cpufreq/s3c2412-cpufreq.c
delete mode 100644 drivers/cpufreq/s3c2416-cpufreq.c
delete mode 100644 drivers/cpufreq/s3c2440-cpufreq.c
delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq.c
delete mode 100644 include/linux/soc/samsung/s3c-cpufreq-core.h
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index d514c8e47badb..97acaa2136fd6 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -189,84 +189,6 @@ config ARM_RASPBERRYPI_CPUFREQ
If in doubt, say N.
-config ARM_S3C_CPUFREQ
- bool
- help
- Internal configuration node for common cpufreq on Samsung SoC
-
-config ARM_S3C24XX_CPUFREQ
- bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
- depends on ARCH_S3C24XX
- select ARM_S3C_CPUFREQ
- help
- This enables the CPUfreq driver for the Samsung S3C24XX family
- of CPUs.
-
- For details, take a look at <file:Documentation/cpu-freq>.
-
- If in doubt, say N.
-
-config ARM_S3C24XX_CPUFREQ_DEBUG
- bool "Debug CPUfreq Samsung driver core"
- depends on ARM_S3C24XX_CPUFREQ
- help
- Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
-
-config ARM_S3C24XX_CPUFREQ_IODEBUG
- bool "Debug CPUfreq Samsung driver IO timing"
- depends on ARM_S3C24XX_CPUFREQ
- help
- Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
-
-config ARM_S3C24XX_CPUFREQ_DEBUGFS
- bool "Export debugfs for CPUFreq"
- depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
- help
- Export status information via debugfs.
-
-config ARM_S3C2410_CPUFREQ
- bool
- depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
- help
- CPU Frequency scaling support for S3C2410
-
-config ARM_S3C2412_CPUFREQ
- bool
- depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
- default y
- select S3C2412_IOTIMING
- help
- CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
-
-config ARM_S3C2416_CPUFREQ
- bool "S3C2416 CPU Frequency scaling support"
- depends on CPU_S3C2416
- help
- This adds the CPUFreq driver for the Samsung S3C2416 and
- S3C2450 SoC. The S3C2416 supports changing the rate of the
- armdiv clock source and also entering a so called dynamic
- voltage scaling mode in which it is possible to reduce the
- core voltage of the CPU.
-
- If in doubt, say N.
-
-config ARM_S3C2416_CPUFREQ_VCORESCALE
- bool "Allow voltage scaling for S3C2416 arm core"
- depends on ARM_S3C2416_CPUFREQ && REGULATOR
- help
- Enable CPU voltage scaling when entering the dvs mode.
- It uses information gathered through existing hardware and
- tests but not documented in any datasheet.
-
- If in doubt, say N.
-
-config ARM_S3C2440_CPUFREQ
- bool "S3C2440/S3C2442 CPU Frequency scaling support"
- depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
- default y
- help
- CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
config ARM_S3C64XX_CPUFREQ
bool "Samsung S3C64XX"
depends on CPU_S3C6410
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index c62291fcceed5..a19842fbd5217 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -71,13 +71,7 @@ obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o
obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o
obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o
-obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
-obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
-obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
-obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
obj-$(CONFIG_ARM_SCMI_CPUFREQ) += scmi-cpufreq.o
diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c
deleted file mode 100644
index 5dcfbf0bfb747..0000000000000
--- a/drivers/cpufreq/s3c2410-cpufreq.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2006-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 CPU Frequency scaling
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#define S3C2410_CLKDIVN_PDIVN (1<<0)
-#define S3C2410_CLKDIVN_HDIVN (1<<1)
-
-/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
-
-static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
- u32 clkdiv = 0;
-
- if (cfg->divs.h_divisor == 2)
- clkdiv |= S3C2410_CLKDIVN_HDIVN;
-
- if (cfg->divs.p_divisor != cfg->divs.h_divisor)
- clkdiv |= S3C2410_CLKDIVN_PDIVN;
-
- s3c24xx_write_clkdivn(clkdiv);
-}
-
-static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned long hclk, fclk, pclk;
- unsigned int hdiv, pdiv;
- unsigned long hclk_max;
-
- fclk = cfg->freq.fclk;
- hclk_max = cfg->max.hclk;
-
- cfg->freq.armclk = fclk;
-
- s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
- __func__, fclk, hclk_max);
-
- hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
- hclk = fclk / hdiv;
-
- if (hclk > cfg->max.hclk) {
- s3c_freq_dbg("%s: hclk too big\n", __func__);
- return -EINVAL;
- }
-
- pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
- pclk = hclk / pdiv;
-
- if (pclk > cfg->max.pclk) {
- s3c_freq_dbg("%s: pclk too big\n", __func__);
- return -EINVAL;
- }
-
- pdiv *= hdiv;
-
- /* record the result */
- cfg->divs.p_divisor = pdiv;
- cfg->divs.h_divisor = hdiv;
-
- return 0;
-}
-
-static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
- .max = {
- .fclk = 200000000,
- .hclk = 100000000,
- .pclk = 50000000,
- },
-
- /* transition latency is about 5ms worst-case, so
- * set 10ms to be sure */
- .latency = 10000000,
-
- .locktime_m = 150,
- .locktime_u = 150,
- .locktime_bits = 12,
-
- .need_pll = 1,
-
- .name = "s3c2410",
- .calc_iotiming = s3c2410_iotiming_calc,
- .set_iotiming = s3c2410_iotiming_set,
- .get_iotiming = s3c2410_iotiming_get,
-
- .set_fvco = s3c2410_set_fvco,
- .set_refresh = s3c2410_cpufreq_setrefresh,
- .set_divs = s3c2410_cpufreq_setdivs,
- .calc_divs = s3c2410_cpufreq_calcdivs,
-
- .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
-};
-
-static int s3c2410_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- return s3c_cpufreq_register(&s3c2410_cpufreq_info);
-}
-
-static struct subsys_interface s3c2410_cpufreq_interface = {
- .name = "s3c2410_cpufreq",
- .subsys = &s3c2410_subsys,
- .add_dev = s3c2410_cpufreq_add,
-};
-
-static int __init s3c2410_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2410_cpufreq_interface);
-}
-arch_initcall(s3c2410_cpufreq_init);
-
-static int s3c2410a_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- /* alter the maximum freq settings for S3C2410A. If a board knows
- * it only has a maximum of 200, then it should register its own
- * limits. */
-
- s3c2410_cpufreq_info.max.fclk = 266000000;
- s3c2410_cpufreq_info.max.hclk = 133000000;
- s3c2410_cpufreq_info.max.pclk = 66500000;
- s3c2410_cpufreq_info.name = "s3c2410a";
-
- return s3c2410_cpufreq_add(dev, sif);
-}
-
-static struct subsys_interface s3c2410a_cpufreq_interface = {
- .name = "s3c2410a_cpufreq",
- .subsys = &s3c2410a_subsys,
- .add_dev = s3c2410a_cpufreq_add,
-};
-
-static int __init s3c2410a_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2410a_cpufreq_interface);
-}
-arch_initcall(s3c2410a_cpufreq_init);
diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c
deleted file mode 100644
index 5945945ead7c0..0000000000000
--- a/drivers/cpufreq/s3c2412-cpufreq.c
+++ /dev/null
@@ -1,240 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412 CPU Frequency scalling
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#define S3C2412_CLKDIVN_PDIVN (1<<2)
-#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0)
-#define S3C2412_CLKDIVN_ARMDIVN (1<<3)
-#define S3C2412_CLKDIVN_DVSEN (1<<4)
-#define S3C2412_CLKDIVN_HALFHCLK (1<<5)
-#define S3C2412_CLKDIVN_USB48DIV (1<<6)
-#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8)
-#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8)
-#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12)
-#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12)
-#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16)
-#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16)
-
-/* our clock resources. */
-static struct clk *xtal;
-static struct clk *fclk;
-static struct clk *hclk;
-static struct clk *armclk;
-
-/* HDIV: 1, 2, 3, 4, 6, 8 */
-
-static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned int hdiv, pdiv, armdiv, dvs;
- unsigned long hclk, fclk, armclk, armdiv_clk;
- unsigned long hclk_max;
-
- fclk = cfg->freq.fclk;
- armclk = cfg->freq.armclk;
- hclk_max = cfg->max.hclk;
-
- /* We can't run hclk above armclk as at the best we have to
- * have armclk and hclk in dvs mode. */
-
- if (hclk_max > armclk)
- hclk_max = armclk;
-
- s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
- __func__, fclk, armclk, hclk_max);
- s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
- __func__, cfg->freq.fclk, cfg->freq.armclk,
- cfg->freq.hclk, cfg->freq.pclk);
-
- armdiv = fclk / armclk;
-
- if (armdiv < 1)
- armdiv = 1;
- if (armdiv > 2)
- armdiv = 2;
-
- cfg->divs.arm_divisor = armdiv;
- armdiv_clk = fclk / armdiv;
-
- hdiv = armdiv_clk / hclk_max;
- if (hdiv < 1)
- hdiv = 1;
-
- cfg->freq.hclk = hclk = armdiv_clk / hdiv;
-
- /* set dvs depending on whether we reached armclk or not. */
- cfg->divs.dvs = dvs = armclk < armdiv_clk;
-
- /* update the actual armclk we achieved. */
- cfg->freq.armclk = dvs ? hclk : armdiv_clk;
-
- s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
- __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
-
- if (hdiv > 4)
- goto invalid;
-
- pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
-
- if ((hclk / pdiv) > cfg->max.pclk)
- pdiv++;
-
- cfg->freq.pclk = hclk / pdiv;
-
- s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
-
- if (pdiv > 2)
- goto invalid;
-
- pdiv *= hdiv;
-
- /* store the result, and then return */
-
- cfg->divs.h_divisor = hdiv * armdiv;
- cfg->divs.p_divisor = pdiv * armdiv;
-
- return 0;
-
-invalid:
- return -EINVAL;
-}
-
-static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned long clkdiv;
- unsigned long olddiv;
-
- olddiv = clkdiv = s3c24xx_read_clkdivn();
-
- /* clear off current clock info */
-
- clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
- clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
- clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
-
- if (cfg->divs.arm_divisor == 2)
- clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
-
- clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
-
- if (cfg->divs.p_divisor != cfg->divs.h_divisor)
- clkdiv |= S3C2412_CLKDIVN_PDIVN;
-
- s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
- s3c24xx_write_clkdivn(clkdiv);
-
- clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
-}
-
-/* set the default cpu frequency information, based on an 200MHz part
- * as we have no other way of detecting the speed rating in software.
- */
-
-static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
- .max = {
- .fclk = 200000000,
- .hclk = 100000000,
- .pclk = 50000000,
- },
-
- .latency = 5000000, /* 5ms */
-
- .locktime_m = 150,
- .locktime_u = 150,
- .locktime_bits = 16,
-
- .name = "s3c2412",
- .set_refresh = s3c2412_cpufreq_setrefresh,
- .set_divs = s3c2412_cpufreq_setdivs,
- .calc_divs = s3c2412_cpufreq_calcdivs,
-
- .calc_iotiming = s3c2412_iotiming_calc,
- .set_iotiming = s3c2412_iotiming_set,
- .get_iotiming = s3c2412_iotiming_get,
-
- .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
-};
-
-static int s3c2412_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- unsigned long fclk_rate;
-
- hclk = clk_get(NULL, "hclk");
- if (IS_ERR(hclk)) {
- pr_err("cannot find hclk clock\n");
- return -ENOENT;
- }
-
- fclk = clk_get(NULL, "fclk");
- if (IS_ERR(fclk)) {
- pr_err("cannot find fclk clock\n");
- goto err_fclk;
- }
-
- fclk_rate = clk_get_rate(fclk);
- if (fclk_rate > 200000000) {
- pr_info("fclk %ld MHz, assuming 266MHz capable part\n",
- fclk_rate / 1000000);
- s3c2412_cpufreq_info.max.fclk = 266000000;
- s3c2412_cpufreq_info.max.hclk = 133000000;
- s3c2412_cpufreq_info.max.pclk = 66000000;
- }
-
- armclk = clk_get(NULL, "armclk");
- if (IS_ERR(armclk)) {
- pr_err("cannot find arm clock\n");
- goto err_armclk;
- }
-
- xtal = clk_get(NULL, "xtal");
- if (IS_ERR(xtal)) {
- pr_err("cannot find xtal clock\n");
- goto err_xtal;
- }
-
- return s3c_cpufreq_register(&s3c2412_cpufreq_info);
-
-err_xtal:
- clk_put(armclk);
-err_armclk:
- clk_put(fclk);
-err_fclk:
- clk_put(hclk);
-
- return -ENOENT;
-}
-
-static struct subsys_interface s3c2412_cpufreq_interface = {
- .name = "s3c2412_cpufreq",
- .subsys = &s3c2412_subsys,
- .add_dev = s3c2412_cpufreq_add,
-};
-
-static int s3c2412_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2412_cpufreq_interface);
-}
-arch_initcall(s3c2412_cpufreq_init);
diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c
deleted file mode 100644
index 5c221bc90210e..0000000000000
--- a/drivers/cpufreq/s3c2416-cpufreq.c
+++ /dev/null
@@ -1,492 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * S3C2416/2450 CPUfreq Support
- *
- * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
- *
- * based on s3c64xx_cpufreq.c
- *
- * Copyright 2009 Wolfson Microelectronics plc
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/regulator/consumer.h>
-#include <linux/reboot.h>
-#include <linux/module.h>
-
-static DEFINE_MUTEX(cpufreq_lock);
-
-struct s3c2416_data {
- struct clk *armdiv;
- struct clk *armclk;
- struct clk *hclk;
-
- unsigned long regulator_latency;
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
- struct regulator *vddarm;
-#endif
-
- struct cpufreq_frequency_table *freq_table;
-
- bool is_dvs;
- bool disable_dvs;
-};
-
-static struct s3c2416_data s3c2416_cpufreq;
-
-struct s3c2416_dvfs {
- unsigned int vddarm_min;
- unsigned int vddarm_max;
-};
-
-/* pseudo-frequency for dvs mode */
-#define FREQ_DVS 132333
-
-/* frequency to sleep and reboot in
- * it's essential to leave dvs, as some boards do not reconfigure the
- * regulator on reboot
- */
-#define FREQ_SLEEP 133333
-
-/* Sources for the ARMCLK */
-#define SOURCE_HCLK 0
-#define SOURCE_ARMDIV 1
-
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
-/* S3C2416 only supports changing the voltage in the dvs-mode.
- * Voltages down to 1.0V seem to work, so we take what the regulator
- * can get us.
- */
-static struct s3c2416_dvfs s3c2416_dvfs_table[] = {
- [SOURCE_HCLK] = { 950000, 1250000 },
- [SOURCE_ARMDIV] = { 1250000, 1350000 },
-};
-#endif
-
-static struct cpufreq_frequency_table s3c2416_freq_table[] = {
- { 0, SOURCE_HCLK, FREQ_DVS },
- { 0, SOURCE_ARMDIV, 133333 },
- { 0, SOURCE_ARMDIV, 266666 },
- { 0, SOURCE_ARMDIV, 400000 },
- { 0, 0, CPUFREQ_TABLE_END },
-};
-
-static struct cpufreq_frequency_table s3c2450_freq_table[] = {
- { 0, SOURCE_HCLK, FREQ_DVS },
- { 0, SOURCE_ARMDIV, 133500 },
- { 0, SOURCE_ARMDIV, 267000 },
- { 0, SOURCE_ARMDIV, 534000 },
- { 0, 0, CPUFREQ_TABLE_END },
-};
-
-static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu)
-{
- struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
-
- if (cpu != 0)
- return 0;
-
- /* return our pseudo-frequency when in dvs mode */
- if (s3c_freq->is_dvs)
- return FREQ_DVS;
-
- return clk_get_rate(s3c_freq->armclk) / 1000;
-}
-
-static int s3c2416_cpufreq_set_armdiv(struct s3c2416_data *s3c_freq,
- unsigned int freq)
-{
- int ret;
-
- if (clk_get_rate(s3c_freq->armdiv) / 1000 != freq) {
- ret = clk_set_rate(s3c_freq->armdiv, freq * 1000);
- if (ret < 0) {
- pr_err("cpufreq: Failed to set armdiv rate %dkHz: %d\n",
- freq, ret);
- return ret;
- }
- }
-
- return 0;
-}
-
-static int s3c2416_cpufreq_enter_dvs(struct s3c2416_data *s3c_freq, int idx)
-{
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
- struct s3c2416_dvfs *dvfs;
-#endif
- int ret;
-
- if (s3c_freq->is_dvs) {
- pr_debug("cpufreq: already in dvs mode, nothing to do\n");
- return 0;
- }
-
- pr_debug("cpufreq: switching armclk to hclk (%lukHz)\n",
- clk_get_rate(s3c_freq->hclk) / 1000);
- ret = clk_set_parent(s3c_freq->armclk, s3c_freq->hclk);
- if (ret < 0) {
- pr_err("cpufreq: Failed to switch armclk to hclk: %d\n", ret);
- return ret;
- }
-
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
- /* changing the core voltage is only allowed when in dvs mode */
- if (s3c_freq->vddarm) {
- dvfs = &s3c2416_dvfs_table[idx];
-
- pr_debug("cpufreq: setting regulator to %d-%d\n",
- dvfs->vddarm_min, dvfs->vddarm_max);
- ret = regulator_set_voltage(s3c_freq->vddarm,
- dvfs->vddarm_min,
- dvfs->vddarm_max);
-
- /* when lowering the voltage failed, there is nothing to do */
- if (ret != 0)
- pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
- }
-#endif
-
- s3c_freq->is_dvs = 1;
-
- return 0;
-}
-
-static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx)
-{
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
- struct s3c2416_dvfs *dvfs;
-#endif
- int ret;
-
- if (!s3c_freq->is_dvs) {
- pr_debug("cpufreq: not in dvs mode, so can't leave\n");
- return 0;
- }
-
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
- if (s3c_freq->vddarm) {
- dvfs = &s3c2416_dvfs_table[idx];
-
- pr_debug("cpufreq: setting regulator to %d-%d\n",
- dvfs->vddarm_min, dvfs->vddarm_max);
- ret = regulator_set_voltage(s3c_freq->vddarm,
- dvfs->vddarm_min,
- dvfs->vddarm_max);
- if (ret != 0) {
- pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
- return ret;
- }
- }
-#endif
-
- /* force armdiv to hclk frequency for transition from dvs*/
- if (clk_get_rate(s3c_freq->armdiv) > clk_get_rate(s3c_freq->hclk)) {
- pr_debug("cpufreq: force armdiv to hclk frequency (%lukHz)\n",
- clk_get_rate(s3c_freq->hclk) / 1000);
- ret = s3c2416_cpufreq_set_armdiv(s3c_freq,
- clk_get_rate(s3c_freq->hclk) / 1000);
- if (ret < 0) {
- pr_err("cpufreq: Failed to set the armdiv to %lukHz: %d\n",
- clk_get_rate(s3c_freq->hclk) / 1000, ret);
- return ret;
- }
- }
-
- pr_debug("cpufreq: switching armclk parent to armdiv (%lukHz)\n",
- clk_get_rate(s3c_freq->armdiv) / 1000);
-
- ret = clk_set_parent(s3c_freq->armclk, s3c_freq->armdiv);
- if (ret < 0) {
- pr_err("cpufreq: Failed to switch armclk clock parent to armdiv: %d\n",
- ret);
- return ret;
- }
-
- s3c_freq->is_dvs = 0;
-
- return 0;
-}
-
-static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
- unsigned int index)
-{
- struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
- unsigned int new_freq;
- int idx, ret, to_dvs = 0;
-
- mutex_lock(&cpufreq_lock);
-
- idx = s3c_freq->freq_table[index].driver_data;
-
- if (idx == SOURCE_HCLK)
- to_dvs = 1;
-
- /* switching to dvs when it's not allowed */
- if (to_dvs && s3c_freq->disable_dvs) {
- pr_debug("cpufreq: entering dvs mode not allowed\n");
- ret = -EINVAL;
- goto out;
- }
-
- /* When leavin dvs mode, always switch the armdiv to the hclk rate
- * The S3C2416 has stability issues when switching directly to
- * higher frequencies.
- */
- new_freq = (s3c_freq->is_dvs && !to_dvs)
- ? clk_get_rate(s3c_freq->hclk) / 1000
- : s3c_freq->freq_table[index].frequency;
-
- if (to_dvs) {
- pr_debug("cpufreq: enter dvs\n");
- ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx);
- } else if (s3c_freq->is_dvs) {
- pr_debug("cpufreq: leave dvs\n");
- ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx);
- } else {
- pr_debug("cpufreq: change armdiv to %dkHz\n", new_freq);
- ret = s3c2416_cpufreq_set_armdiv(s3c_freq, new_freq);
- }
-
-out:
- mutex_unlock(&cpufreq_lock);
-
- return ret;
-}
-
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
-static void s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
-{
- int count, v, i, found;
- struct cpufreq_frequency_table *pos;
- struct s3c2416_dvfs *dvfs;
-
- count = regulator_count_voltages(s3c_freq->vddarm);
- if (count < 0) {
- pr_err("cpufreq: Unable to check supported voltages\n");
- return;
- }
-
- if (!count)
- goto out;
-
- cpufreq_for_each_valid_entry(pos, s3c_freq->freq_table) {
- dvfs = &s3c2416_dvfs_table[pos->driver_data];
- found = 0;
-
- /* Check only the min-voltage, more is always ok on S3C2416 */
- for (i = 0; i < count; i++) {
- v = regulator_list_voltage(s3c_freq->vddarm, i);
- if (v >= dvfs->vddarm_min)
- found = 1;
- }
-
- if (!found) {
- pr_debug("cpufreq: %dkHz unsupported by regulator\n",
- pos->frequency);
- pos->frequency = CPUFREQ_ENTRY_INVALID;
- }
- }
-
-out:
- /* Guessed */
- s3c_freq->regulator_latency = 1 * 1000 * 1000;
-}
-#endif
-
-static int s3c2416_cpufreq_reboot_notifier_evt(struct notifier_block *this,
- unsigned long event, void *ptr)
-{
- struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
- int ret;
- struct cpufreq_policy *policy;
-
- mutex_lock(&cpufreq_lock);
-
- /* disable further changes */
- s3c_freq->disable_dvs = 1;
-
- mutex_unlock(&cpufreq_lock);
-
- /* some boards don't reconfigure the regulator on reboot, which
- * could lead to undervolting the cpu when the clock is reset.
- * Therefore we always leave the DVS mode on reboot.
- */
- if (s3c_freq->is_dvs) {
- pr_debug("cpufreq: leave dvs on reboot\n");
-
- policy = cpufreq_cpu_get(0);
- if (!policy) {
- pr_debug("cpufreq: get no policy for cpu0\n");
- return NOTIFY_BAD;
- }
-
- ret = cpufreq_driver_target(policy, FREQ_SLEEP, 0);
- cpufreq_cpu_put(policy);
-
- if (ret < 0)
- return NOTIFY_BAD;
- }
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block s3c2416_cpufreq_reboot_notifier = {
- .notifier_call = s3c2416_cpufreq_reboot_notifier_evt,
-};
-
-static int s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
- struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
- struct cpufreq_frequency_table *pos;
- struct clk *msysclk;
- unsigned long rate;
- int ret;
-
- if (policy->cpu != 0)
- return -EINVAL;
-
- msysclk = clk_get(NULL, "msysclk");
- if (IS_ERR(msysclk)) {
- ret = PTR_ERR(msysclk);
- pr_err("cpufreq: Unable to obtain msysclk: %d\n", ret);
- return ret;
- }
-
- /*
- * S3C2416 and S3C2450 share the same processor-ID and also provide no
- * other means to distinguish them other than through the rate of
- * msysclk. On S3C2416 msysclk runs at 800MHz and on S3C2450 at 533MHz.
- */
- rate = clk_get_rate(msysclk);
- if (rate == 800 * 1000 * 1000) {
- pr_info("cpufreq: msysclk running at %lukHz, using S3C2416 frequency table\n",
- rate / 1000);
- s3c_freq->freq_table = s3c2416_freq_table;
- policy->cpuinfo.max_freq = 400000;
- } else if (rate / 1000 == 534000) {
- pr_info("cpufreq: msysclk running at %lukHz, using S3C2450 frequency table\n",
- rate / 1000);
- s3c_freq->freq_table = s3c2450_freq_table;
- policy->cpuinfo.max_freq = 534000;
- }
-
- /* not needed anymore */
- clk_put(msysclk);
-
- if (s3c_freq->freq_table == NULL) {
- pr_err("cpufreq: No frequency information for this CPU, msysclk at %lukHz\n",
- rate / 1000);
- return -ENODEV;
- }
-
- s3c_freq->is_dvs = 0;
-
- s3c_freq->armdiv = clk_get(NULL, "armdiv");
- if (IS_ERR(s3c_freq->armdiv)) {
- ret = PTR_ERR(s3c_freq->armdiv);
- pr_err("cpufreq: Unable to obtain ARMDIV: %d\n", ret);
- return ret;
- }
-
- s3c_freq->hclk = clk_get(NULL, "hclk");
- if (IS_ERR(s3c_freq->hclk)) {
- ret = PTR_ERR(s3c_freq->hclk);
- pr_err("cpufreq: Unable to obtain HCLK: %d\n", ret);
- goto err_hclk;
- }
-
- /* chech hclk rate, we only support the common 133MHz for now
- * hclk could also run at 66MHz, but this not often used
- */
- rate = clk_get_rate(s3c_freq->hclk);
- if (rate < 133 * 1000 * 1000) {
- pr_err("cpufreq: HCLK not at 133MHz\n");
- ret = -EINVAL;
- goto err_armclk;
- }
-
- s3c_freq->armclk = clk_get(NULL, "armclk");
- if (IS_ERR(s3c_freq->armclk)) {
- ret = PTR_ERR(s3c_freq->armclk);
- pr_err("cpufreq: Unable to obtain ARMCLK: %d\n", ret);
- goto err_armclk;
- }
-
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
- s3c_freq->vddarm = regulator_get(NULL, "vddarm");
- if (IS_ERR(s3c_freq->vddarm)) {
- ret = PTR_ERR(s3c_freq->vddarm);
- pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
- goto err_vddarm;
- }
-
- s3c2416_cpufreq_cfg_regulator(s3c_freq);
-#else
- s3c_freq->regulator_latency = 0;
-#endif
-
- cpufreq_for_each_entry(pos, s3c_freq->freq_table) {
- /* special handling for dvs mode */
- if (pos->driver_data == 0) {
- if (!s3c_freq->hclk) {
- pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n",
- pos->frequency);
- pos->frequency = CPUFREQ_ENTRY_INVALID;
- } else {
- continue;
- }
- }
-
- /* Check for frequencies we can generate */
- rate = clk_round_rate(s3c_freq->armdiv,
- pos->frequency * 1000);
- rate /= 1000;
- if (rate != pos->frequency) {
- pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n",
- pos->frequency, rate);
- pos->frequency = CPUFREQ_ENTRY_INVALID;
- }
- }
-
- /* Datasheet says PLL stabalisation time must be at least 300us,
- * so but add some fudge. (reference in LOCKCON0 register description)
- */
- cpufreq_generic_init(policy, s3c_freq->freq_table,
- (500 * 1000) + s3c_freq->regulator_latency);
- register_reboot_notifier(&s3c2416_cpufreq_reboot_notifier);
-
- return 0;
-
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
-err_vddarm:
- clk_put(s3c_freq->armclk);
-#endif
-err_armclk:
- clk_put(s3c_freq->hclk);
-err_hclk:
- clk_put(s3c_freq->armdiv);
-
- return ret;
-}
-
-static struct cpufreq_driver s3c2416_cpufreq_driver = {
- .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = s3c2416_cpufreq_set_target,
- .get = s3c2416_cpufreq_get_speed,
- .init = s3c2416_cpufreq_driver_init,
- .name = "s3c2416",
- .attr = cpufreq_generic_attr,
-};
-
-static int __init s3c2416_cpufreq_init(void)
-{
- return cpufreq_register_driver(&s3c2416_cpufreq_driver);
-}
-module_init(s3c2416_cpufreq_init);
diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c
deleted file mode 100644
index 2011fb9c03a49..0000000000000
--- a/drivers/cpufreq/s3c2440-cpufreq.c
+++ /dev/null
@@ -1,321 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2006-2009 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- * Vincent Sanders <vince@simtec.co.uk>
- *
- * S3C2440/S3C2442 CPU Frequency scaling
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#define S3C2440_CLKDIVN_PDIVN (1<<0)
-#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1)
-#define S3C2440_CLKDIVN_HDIVN_1 (0<<1)
-#define S3C2440_CLKDIVN_HDIVN_2 (1<<1)
-#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1)
-#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1)
-#define S3C2440_CLKDIVN_UCLK (1<<3)
-
-#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0)
-#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4)
-#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8)
-#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9)
-#define S3C2440_CAMDIVN_DVSEN (1<<12)
-
-#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5)
-
-static struct clk *xtal;
-static struct clk *fclk;
-static struct clk *hclk;
-static struct clk *armclk;
-
-/* HDIV: 1, 2, 3, 4, 6, 8 */
-
-static inline int within_khz(unsigned long a, unsigned long b)
-{
- long diff = a - b;
-
- return (diff >= -1000 && diff <= 1000);
-}
-
-/**
- * s3c2440_cpufreq_calcdivs - calculate divider settings
- * @cfg: The cpu frequency settings.
- *
- * Calcualte the divider values for the given frequency settings
- * specified in @cfg. The values are stored in @cfg for later use
- * by the relevant set routine if the request settings can be reached.
- */
-static int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned int hdiv, pdiv;
- unsigned long hclk, fclk, armclk;
- unsigned long hclk_max;
-
- fclk = cfg->freq.fclk;
- armclk = cfg->freq.armclk;
- hclk_max = cfg->max.hclk;
-
- s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
- __func__, fclk, armclk, hclk_max);
-
- if (armclk > fclk) {
- pr_warn("%s: armclk > fclk\n", __func__);
- armclk = fclk;
- }
-
- /* if we are in DVS, we need HCLK to be <= ARMCLK */
- if (armclk < fclk && armclk < hclk_max)
- hclk_max = armclk;
-
- for (hdiv = 1; hdiv < 9; hdiv++) {
- if (hdiv == 5 || hdiv == 7)
- hdiv++;
-
- hclk = (fclk / hdiv);
- if (hclk <= hclk_max || within_khz(hclk, hclk_max))
- break;
- }
-
- s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
-
- if (hdiv > 8)
- goto invalid;
-
- pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
-
- if ((hclk / pdiv) > cfg->max.pclk)
- pdiv++;
-
- s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
-
- if (pdiv > 2)
- goto invalid;
-
- pdiv *= hdiv;
-
- /* calculate a valid armclk */
-
- if (armclk < hclk)
- armclk = hclk;
-
- /* if we're running armclk lower than fclk, this really means
- * that the system should go into dvs mode, which means that
- * armclk is connected to hclk. */
- if (armclk < fclk) {
- cfg->divs.dvs = 1;
- armclk = hclk;
- } else
- cfg->divs.dvs = 0;
-
- cfg->freq.armclk = armclk;
-
- /* store the result, and then return */
-
- cfg->divs.h_divisor = hdiv;
- cfg->divs.p_divisor = pdiv;
-
- return 0;
-
- invalid:
- return -EINVAL;
-}
-
-#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
- S3C2440_CAMDIVN_HCLK4_HALF)
-
-/**
- * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
- * @cfg: The cpu frequency settings.
- *
- * Set the divisors from the settings in @cfg, which where generated
- * during the calculation phase by s3c2440_cpufreq_calcdivs().
- */
-static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned long clkdiv, camdiv;
-
- s3c_freq_dbg("%s: divisors: h=%d, p=%d\n", __func__,
- cfg->divs.h_divisor, cfg->divs.p_divisor);
-
- clkdiv = s3c24xx_read_clkdivn();
- camdiv = s3c2440_read_camdivn();
-
- clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
- camdiv &= ~CAMDIVN_HCLK_HALF;
-
- switch (cfg->divs.h_divisor) {
- case 1:
- clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
- break;
-
- case 2:
- clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
- break;
-
- case 6:
- camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
- fallthrough;
- case 3:
- clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
- break;
-
- case 8:
- camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
- fallthrough;
- case 4:
- clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
- break;
-
- default:
- BUG(); /* we don't expect to get here. */
- }
-
- if (cfg->divs.p_divisor != cfg->divs.h_divisor)
- clkdiv |= S3C2440_CLKDIVN_PDIVN;
-
- /* todo - set pclk. */
-
- /* Write the divisors first with hclk intentionally halved so that
- * when we write clkdiv we will under-frequency instead of over. We
- * then make a short delay and remove the hclk halving if necessary.
- */
-
- s3c2440_write_camdivn(camdiv | CAMDIVN_HCLK_HALF);
- s3c24xx_write_clkdivn(clkdiv);
-
- ndelay(20);
- s3c2440_write_camdivn(camdiv);
-
- clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
-}
-
-static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
- int *divs,
- struct cpufreq_frequency_table *table,
- size_t table_size)
-{
- unsigned long freq;
- int index = 0;
- int div;
-
- for (div = *divs; div > 0; div = *divs++) {
- freq = fclk / div;
-
- if (freq > max_hclk && div != 1)
- continue;
-
- freq /= 1000; /* table is in kHz */
- index = s3c_cpufreq_addfreq(table, index, table_size, freq);
- if (index < 0)
- break;
- }
-
- return index;
-}
-
-static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
-
-static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
- struct cpufreq_frequency_table *table,
- size_t table_size)
-{
- int ret;
-
- WARN_ON(cfg->info == NULL);
- WARN_ON(cfg->board == NULL);
-
- ret = run_freq_for(cfg->info->max.hclk,
- cfg->info->max.fclk,
- hclk_divs,
- table, table_size);
-
- s3c_freq_dbg("%s: returning %d\n", __func__, ret);
-
- return ret;
-}
-
-static struct s3c_cpufreq_info s3c2440_cpufreq_info = {
- .max = {
- .fclk = 400000000,
- .hclk = 133333333,
- .pclk = 66666666,
- },
-
- .locktime_m = 300,
- .locktime_u = 300,
- .locktime_bits = 16,
-
- .name = "s3c244x",
- .calc_iotiming = s3c2410_iotiming_calc,
- .set_iotiming = s3c2410_iotiming_set,
- .get_iotiming = s3c2410_iotiming_get,
- .set_fvco = s3c2410_set_fvco,
-
- .set_refresh = s3c2410_cpufreq_setrefresh,
- .set_divs = s3c2440_cpufreq_setdivs,
- .calc_divs = s3c2440_cpufreq_calcdivs,
- .calc_freqtable = s3c2440_cpufreq_calctable,
-
- .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
-};
-
-static int s3c2440_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- xtal = s3c_cpufreq_clk_get(NULL, "xtal");
- hclk = s3c_cpufreq_clk_get(NULL, "hclk");
- fclk = s3c_cpufreq_clk_get(NULL, "fclk");
- armclk = s3c_cpufreq_clk_get(NULL, "armclk");
-
- if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
- pr_err("%s: failed to get clocks\n", __func__);
- return -ENOENT;
- }
-
- return s3c_cpufreq_register(&s3c2440_cpufreq_info);
-}
-
-static struct subsys_interface s3c2440_cpufreq_interface = {
- .name = "s3c2440_cpufreq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_cpufreq_add,
-};
-
-static int s3c2440_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2440_cpufreq_interface);
-}
-
-/* arch_initcall adds the clocks we need, so use subsys_initcall. */
-subsys_initcall(s3c2440_cpufreq_init);
-
-static struct subsys_interface s3c2442_cpufreq_interface = {
- .name = "s3c2442_cpufreq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c2440_cpufreq_add,
-};
-
-static int s3c2442_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2442_cpufreq_interface);
-}
-subsys_initcall(s3c2442_cpufreq_init);
diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
deleted file mode 100644
index 93971dfe7c751..0000000000000
--- a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2009 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Frequency scaling - debugfs status support
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/err.h>
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-
-static struct dentry *dbgfs_root;
-static struct dentry *dbgfs_file_io;
-static struct dentry *dbgfs_file_info;
-static struct dentry *dbgfs_file_board;
-
-#define print_ns(x) ((x) / 10), ((x) % 10)
-
-static void show_max(struct seq_file *seq, struct s3c_freq *f)
-{
- seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
- f->fclk, f->hclk, f->pclk, f->armclk);
-}
-
-static int board_show(struct seq_file *seq, void *p)
-{
- struct s3c_cpufreq_config *cfg;
- struct s3c_cpufreq_board *brd;
-
- cfg = s3c_cpufreq_getconfig();
- if (!cfg) {
- seq_printf(seq, "no configuration registered\n");
- return 0;
- }
-
- brd = cfg->board;
- if (!brd) {
- seq_printf(seq, "no board definition set?\n");
- return 0;
- }
-
- seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
- seq_printf(seq, "auto_io=%u\n", brd->auto_io);
- seq_printf(seq, "need_io=%u\n", brd->need_io);
-
- show_max(seq, &brd->max);
-
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(board);
-
-static int info_show(struct seq_file *seq, void *p)
-{
- struct s3c_cpufreq_config *cfg;
-
- cfg = s3c_cpufreq_getconfig();
- if (!cfg) {
- seq_printf(seq, "no configuration registered\n");
- return 0;
- }
-
- seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk);
- seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n",
- cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
- seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk);
- seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
- seq_printf(seq, "\n");
-
- show_max(seq, &cfg->max);
-
- seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
- cfg->divs.h_divisor, cfg->divs.p_divisor,
- cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
- seq_printf(seq, "\n");
-
- seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(info);
-
-static int io_show(struct seq_file *seq, void *p)
-{
- void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
- struct s3c_cpufreq_config *cfg;
- struct s3c_iotimings *iot;
- union s3c_iobank *iob;
- int bank;
-
- cfg = s3c_cpufreq_getconfig();
- if (!cfg) {
- seq_printf(seq, "no configuration registered\n");
- return 0;
- }
-
- show_bank = cfg->info->debug_io_show;
- if (!show_bank) {
- seq_printf(seq, "no code to show bank timing\n");
- return 0;
- }
-
- iot = s3c_cpufreq_getiotimings();
- if (!iot) {
- seq_printf(seq, "no io timings registered\n");
- return 0;
- }
-
- seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
-
- for (bank = 0; bank < MAX_BANKS; bank++) {
- iob = &iot->bank[bank];
-
- seq_printf(seq, "bank %d: ", bank);
-
- if (!iob->io_2410) {
- seq_printf(seq, "nothing set\n");
- continue;
- }
-
- show_bank(seq, cfg, iob);
- }
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(io);
-
-static int __init s3c_freq_debugfs_init(void)
-{
- dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
- if (IS_ERR(dbgfs_root)) {
- pr_err("%s: error creating debugfs root\n", __func__);
- return PTR_ERR(dbgfs_root);
- }
-
- dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
- NULL, &io_fops);
-
- dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
- NULL, &info_fops);
-
- dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
- NULL, &board_fops);
-
- return 0;
-}
-
-late_initcall(s3c_freq_debugfs_init);
-
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
deleted file mode 100644
index 7380c32b238e0..0000000000000
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ /dev/null
@@ -1,648 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2006-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Frequency scaling
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/sysfs.h>
-#include <linux/slab.h>
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-/* note, cpufreq support deals in kHz, no Hz */
-static struct cpufreq_driver s3c24xx_driver;
-static struct s3c_cpufreq_config cpu_cur;
-static struct s3c_iotimings s3c24xx_iotiming;
-static struct cpufreq_frequency_table *pll_reg;
-static unsigned int last_target = ~0;
-static unsigned int ftab_size;
-static struct cpufreq_frequency_table *ftab;
-
-static struct clk *_clk_mpll;
-static struct clk *_clk_xtal;
-static struct clk *clk_fclk;
-static struct clk *clk_hclk;
-static struct clk *clk_pclk;
-static struct clk *clk_arm;
-
-#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS
-struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
-{
- return &cpu_cur;
-}
-
-struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
-{
- return &s3c24xx_iotiming;
-}
-#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS */
-
-static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
-{
- unsigned long fclk, pclk, hclk, armclk;
-
- cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
- cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
- cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
- cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
-
- cfg->pll.driver_data = s3c24xx_read_mpllcon();
- cfg->pll.frequency = fclk;
-
- cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
-
- cfg->divs.h_divisor = fclk / hclk;
- cfg->divs.p_divisor = fclk / pclk;
-}
-
-static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
-{
- unsigned long pll = cfg->pll.frequency;
-
- cfg->freq.fclk = pll;
- cfg->freq.hclk = pll / cfg->divs.h_divisor;
- cfg->freq.pclk = pll / cfg->divs.p_divisor;
-
- /* convert hclk into 10ths of nanoseconds for io calcs */
- cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
-}
-
-static inline int closer(unsigned int target, unsigned int n, unsigned int c)
-{
- int diff_cur = abs(target - c);
- int diff_new = abs(target - n);
-
- return (diff_new < diff_cur);
-}
-
-static void s3c_cpufreq_show(const char *pfx,
- struct s3c_cpufreq_config *cfg)
-{
- s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
- pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
- cfg->freq.hclk, cfg->divs.h_divisor,
- cfg->freq.pclk, cfg->divs.p_divisor);
-}
-
-/* functions to wrapper the driver info calls to do the cpu specific work */
-
-static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
-{
- if (cfg->info->set_iotiming)
- (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
-}
-
-static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
-{
- if (cfg->info->calc_iotiming)
- return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
-
- return 0;
-}
-
-static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
- (cfg->info->set_refresh)(cfg);
-}
-
-static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
- (cfg->info->set_divs)(cfg);
-}
-
-static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
- return (cfg->info->calc_divs)(cfg);
-}
-
-static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
-{
- cfg->mpll = _clk_mpll;
- (cfg->info->set_fvco)(cfg);
-}
-
-static inline void s3c_cpufreq_updateclk(struct clk *clk,
- unsigned int freq)
-{
- clk_set_rate(clk, freq);
-}
-
-static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
- unsigned int target_freq,
- struct cpufreq_frequency_table *pll)
-{
- struct s3c_cpufreq_freqs freqs;
- struct s3c_cpufreq_config cpu_new;
- unsigned long flags;
-
- cpu_new = cpu_cur; /* copy new from current */
-
- s3c_cpufreq_show("cur", &cpu_cur);
-
- /* TODO - check for DMA currently outstanding */
-
- cpu_new.pll = pll ? *pll : cpu_cur.pll;
-
- if (pll)
- freqs.pll_changing = 1;
-
- /* update our frequencies */
-
- cpu_new.freq.armclk = target_freq;
- cpu_new.freq.fclk = cpu_new.pll.frequency;
-
- if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
- pr_err("no divisors for %d\n", target_freq);
- goto err_notpossible;
- }
-
- s3c_freq_dbg("%s: got divs\n", __func__);
-
- s3c_cpufreq_calc(&cpu_new);
-
- s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
-
- if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
- if (s3c_cpufreq_calcio(&cpu_new) < 0) {
- pr_err("%s: no IO timings\n", __func__);
- goto err_notpossible;
- }
- }
-
- s3c_cpufreq_show("new", &cpu_new);
-
- /* setup our cpufreq parameters */
-
- freqs.old = cpu_cur.freq;
- freqs.new = cpu_new.freq;
-
- freqs.freqs.old = cpu_cur.freq.armclk / 1000;
- freqs.freqs.new = cpu_new.freq.armclk / 1000;
-
- /* update f/h/p clock settings before we issue the change
- * notification, so that drivers do not need to do anything
- * special if they want to recalculate on CPUFREQ_PRECHANGE. */
-
- s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
- s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
- s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
- s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
-
- /* start the frequency change */
- cpufreq_freq_transition_begin(policy, &freqs.freqs);
-
- /* If hclk is staying the same, then we do not need to
- * re-write the IO or the refresh timings whilst we are changing
- * speed. */
-
- local_irq_save(flags);
-
- /* is our memory clock slowing down? */
- if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
- s3c_cpufreq_setrefresh(&cpu_new);
- s3c_cpufreq_setio(&cpu_new);
- }
-
- if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
- /* not changing PLL, just set the divisors */
-
- s3c_cpufreq_setdivs(&cpu_new);
- } else {
- if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
- /* slow the cpu down, then set divisors */
-
- s3c_cpufreq_setfvco(&cpu_new);
- s3c_cpufreq_setdivs(&cpu_new);
- } else {
- /* set the divisors, then speed up */
-
- s3c_cpufreq_setdivs(&cpu_new);
- s3c_cpufreq_setfvco(&cpu_new);
- }
- }
-
- /* did our memory clock speed up */
- if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
- s3c_cpufreq_setrefresh(&cpu_new);
- s3c_cpufreq_setio(&cpu_new);
- }
-
- /* update our current settings */
- cpu_cur = cpu_new;
-
- local_irq_restore(flags);
-
- /* notify everyone we've done this */
- cpufreq_freq_transition_end(policy, &freqs.freqs, 0);
-
- s3c_freq_dbg("%s: finished\n", __func__);
- return 0;
-
- err_notpossible:
- pr_err("no compatible settings for %d\n", target_freq);
- return -EINVAL;
-}
-
-/* s3c_cpufreq_target
- *
- * called by the cpufreq core to adjust the frequency that the CPU
- * is currently running at.
- */
-
-static int s3c_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_frequency_table *pll;
- unsigned int index;
-
- /* avoid repeated calls which cause a needless amout of duplicated
- * logging output (and CPU time as the calculation process is
- * done) */
- if (target_freq == last_target)
- return 0;
-
- last_target = target_freq;
-
- s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
- __func__, policy, target_freq, relation);
-
- if (ftab) {
- index = cpufreq_frequency_table_target(policy, target_freq,
- relation);
-
- s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
- target_freq, index, ftab[index].frequency);
- target_freq = ftab[index].frequency;
- }
-
- target_freq *= 1000; /* convert target to Hz */
-
- /* find the settings for our new frequency */
-
- if (!pll_reg || cpu_cur.lock_pll) {
- /* either we've not got any PLL values, or we've locked
- * to the current one. */
- pll = NULL;
- } else {
- struct cpufreq_policy tmp_policy;
-
- /* we keep the cpu pll table in Hz, to ensure we get an
- * accurate value for the PLL output. */
-
- tmp_policy.min = policy->min * 1000;
- tmp_policy.max = policy->max * 1000;
- tmp_policy.cpu = policy->cpu;
- tmp_policy.freq_table = pll_reg;
-
- /* cpufreq_frequency_table_target returns the index
- * of the table entry, not the value of
- * the table entry's index field. */
-
- index = cpufreq_frequency_table_target(&tmp_policy, target_freq,
- relation);
- pll = pll_reg + index;
-
- s3c_freq_dbg("%s: target %u => %u\n",
- __func__, target_freq, pll->frequency);
-
- target_freq = pll->frequency;
- }
-
- return s3c_cpufreq_settarget(policy, target_freq, pll);
-}
-
-struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
-{
- struct clk *clk;
-
- clk = clk_get(dev, name);
- if (IS_ERR(clk))
- pr_err("failed to get clock '%s'\n", name);
-
- return clk;
-}
-
-static int s3c_cpufreq_init(struct cpufreq_policy *policy)
-{
- policy->clk = clk_arm;
- policy->cpuinfo.transition_latency = cpu_cur.info->latency;
- policy->freq_table = ftab;
-
- return 0;
-}
-
-static int __init s3c_cpufreq_initclks(void)
-{
- _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
- _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
- clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
- clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
- clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
- clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
-
- if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
- IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
- pr_err("%s: could not get clock(s)\n", __func__);
- return -ENOENT;
- }
-
- pr_info("%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n",
- __func__,
- clk_get_rate(clk_fclk) / 1000,
- clk_get_rate(clk_hclk) / 1000,
- clk_get_rate(clk_pclk) / 1000,
- clk_get_rate(clk_arm) / 1000);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static struct cpufreq_frequency_table suspend_pll;
-static unsigned int suspend_freq;
-
-static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
-{
- suspend_pll.frequency = clk_get_rate(_clk_mpll);
- suspend_pll.driver_data = s3c24xx_read_mpllcon();
- suspend_freq = clk_get_rate(clk_arm);
-
- return 0;
-}
-
-static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
-{
- int ret;
-
- s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
-
- last_target = ~0; /* invalidate last_target setting */
-
- /* whilst we will be called later on, we try and re-set the
- * cpu frequencies as soon as possible so that we do not end
- * up resuming devices and then immediately having to re-set
- * a number of settings once these devices have restarted.
- *
- * as a note, it is expected devices are not used until they
- * have been un-suspended and at that time they should have
- * used the updated clock settings.
- */
-
- ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
- if (ret) {
- pr_err("%s: failed to reset pll/freq\n", __func__);
- return ret;
- }
-
- return 0;
-}
-#else
-#define s3c_cpufreq_resume NULL
-#define s3c_cpufreq_suspend NULL
-#endif
-
-static struct cpufreq_driver s3c24xx_driver = {
- .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
- .target = s3c_cpufreq_target,
- .get = cpufreq_generic_get,
- .init = s3c_cpufreq_init,
- .suspend = s3c_cpufreq_suspend,
- .resume = s3c_cpufreq_resume,
- .name = "s3c24xx",
-};
-
-
-int s3c_cpufreq_register(struct s3c_cpufreq_info *info)
-{
- if (!info || !info->name) {
- pr_err("%s: failed to pass valid information\n", __func__);
- return -EINVAL;
- }
-
- pr_info("S3C24XX CPU Frequency driver, %s cpu support\n",
- info->name);
-
- /* check our driver info has valid data */
-
- BUG_ON(info->set_refresh == NULL);
- BUG_ON(info->set_divs == NULL);
- BUG_ON(info->calc_divs == NULL);
-
- /* info->set_fvco is optional, depending on whether there
- * is a need to set the clock code. */
-
- cpu_cur.info = info;
-
- /* Note, driver registering should probably update locktime */
-
- return 0;
-}
-
-int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
-{
- struct s3c_cpufreq_board *ours;
-
- if (!board) {
- pr_info("%s: no board data\n", __func__);
- return -EINVAL;
- }
-
- /* Copy the board information so that each board can make this
- * initdata. */
-
- ours = kzalloc(sizeof(*ours), GFP_KERNEL);
- if (!ours)
- return -ENOMEM;
-
- *ours = *board;
- cpu_cur.board = ours;
-
- return 0;
-}
-
-static int __init s3c_cpufreq_auto_io(void)
-{
- int ret;
-
- if (!cpu_cur.info->get_iotiming) {
- pr_err("%s: get_iotiming undefined\n", __func__);
- return -ENOENT;
- }
-
- pr_info("%s: working out IO settings\n", __func__);
-
- ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
- if (ret)
- pr_err("%s: failed to get timings\n", __func__);
-
- return ret;
-}
-
-/* if one or is zero, then return the other, otherwise return the min */
-#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
-
-/**
- * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
- * @dst: The destination structure
- * @a: One argument.
- * @b: The other argument.
- *
- * Create a minimum of each frequency entry in the 'struct s3c_freq',
- * unless the entry is zero when it is ignored and the non-zero argument
- * used.
- */
-static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
- struct s3c_freq *a, struct s3c_freq *b)
-{
- dst->fclk = do_min(a->fclk, b->fclk);
- dst->hclk = do_min(a->hclk, b->hclk);
- dst->pclk = do_min(a->pclk, b->pclk);
- dst->armclk = do_min(a->armclk, b->armclk);
-}
-
-static inline u32 calc_locktime(u32 freq, u32 time_us)
-{
- u32 result;
-
- result = freq * time_us;
- result = DIV_ROUND_UP(result, 1000 * 1000);
-
- return result;
-}
-
-static void s3c_cpufreq_update_loctkime(void)
-{
- unsigned int bits = cpu_cur.info->locktime_bits;
- u32 rate = (u32)clk_get_rate(_clk_xtal);
- u32 val;
-
- if (bits == 0) {
- WARN_ON(1);
- return;
- }
-
- val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
- val |= calc_locktime(rate, cpu_cur.info->locktime_m);
-
- pr_info("%s: new locktime is 0x%08x\n", __func__, val);
- s3c24xx_write_locktime(val);
-}
-
-static int s3c_cpufreq_build_freq(void)
-{
- int size, ret;
-
- kfree(ftab);
-
- size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
- size++;
-
- ftab = kcalloc(size, sizeof(*ftab), GFP_KERNEL);
- if (!ftab)
- return -ENOMEM;
-
- ftab_size = size;
-
- ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
- s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
-
- return 0;
-}
-
-static int __init s3c_cpufreq_initcall(void)
-{
- int ret = 0;
-
- if (cpu_cur.info && cpu_cur.board) {
- ret = s3c_cpufreq_initclks();
- if (ret)
- goto out;
-
- /* get current settings */
- s3c_cpufreq_getcur(&cpu_cur);
- s3c_cpufreq_show("cur", &cpu_cur);
-
- if (cpu_cur.board->auto_io) {
- ret = s3c_cpufreq_auto_io();
- if (ret) {
- pr_err("%s: failed to get io timing\n",
- __func__);
- goto out;
- }
- }
-
- if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
- pr_err("%s: no IO support registered\n", __func__);
- ret = -EINVAL;
- goto out;
- }
-
- if (!cpu_cur.info->need_pll)
- cpu_cur.lock_pll = 1;
-
- s3c_cpufreq_update_loctkime();
-
- s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
- &cpu_cur.info->max);
-
- if (cpu_cur.info->calc_freqtable)
- s3c_cpufreq_build_freq();
-
- ret = cpufreq_register_driver(&s3c24xx_driver);
- }
-
- out:
- return ret;
-}
-
-late_initcall(s3c_cpufreq_initcall);
-
-/**
- * s3c_plltab_register - register CPU PLL table.
- * @plls: The list of PLL entries.
- * @plls_no: The size of the PLL entries @plls.
- *
- * Register the given set of PLLs with the system.
- */
-int s3c_plltab_register(struct cpufreq_frequency_table *plls,
- unsigned int plls_no)
-{
- struct cpufreq_frequency_table *vals;
- unsigned int size;
-
- size = sizeof(*vals) * (plls_no + 1);
-
- vals = kzalloc(size, GFP_KERNEL);
- if (vals) {
- memcpy(vals, plls, size);
- pll_reg = vals;
-
- /* write a terminating entry, we don't store it in the
- * table that is stored in the kernel */
- vals += plls_no;
- vals->frequency = CPUFREQ_TABLE_END;
-
- pr_info("%d PLL entries\n", plls_no);
- } else
- pr_err("no memory for PLL tables\n");
-
- return vals ? 0 : -ENOMEM;
-}
diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h
deleted file mode 100644
index 3b278afb769bb..0000000000000
--- a/include/linux/soc/samsung/s3c-cpufreq-core.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2006-2009 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C CPU frequency scaling support - core support
- */
-#ifndef __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H
-#define __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H
-
-#include <linux/soc/samsung/s3c-cpu-freq.h>
-
-struct seq_file;
-
-#define MAX_BANKS (8)
-#define S3C2412_MAX_IO (8)
-
-/**
- * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
- * @bankcon: The cached version of settings in this structure.
- * @tacp:
- * @tacs: Time from address valid to nCS asserted.
- * @tcos: Time from nCS asserted to nOE or nWE asserted.
- * @tacc: Time that nOE or nWE is asserted.
- * @tcoh: Time nCS is held after nOE or nWE are released.
- * @tcah: Time address is held for after
- * @nwait_en: Whether nWAIT is enabled for this bank.
- *
- * This structure represents the IO timings for a S3C2410 style IO bank
- * used by the CPU frequency support if it needs to change the settings
- * of the IO.
- */
-struct s3c2410_iobank_timing {
- unsigned long bankcon;
- unsigned int tacp;
- unsigned int tacs;
- unsigned int tcos;
- unsigned int tacc;
- unsigned int tcoh; /* nCS hold after nOE/nWE */
- unsigned int tcah; /* Address hold after nCS */
- unsigned char nwait_en; /* nWait enabled for bank. */
-};
-
-/**
- * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
- * @idcy: The idle cycle time between transactions.
- * @wstrd: nCS release to end of read cycle.
- * @wstwr: nCS release to end of write cycle.
- * @wstoen: nCS assertion to nOE assertion time.
- * @wstwen: nCS assertion to nWE assertion time.
- * @wstbrd: Burst ready delay.
- * @smbidcyr: Register cache for smbidcyr value.
- * @smbwstrd: Register cache for smbwstrd value.
- * @smbwstwr: Register cache for smbwstwr value.
- * @smbwstoen: Register cache for smbwstoen value.
- * @smbwstwen: Register cache for smbwstwen value.
- * @smbwstbrd: Register cache for smbwstbrd value.
- *
- * Timing information for a IO bank on an S3C2412 or similar system which
- * uses a PL093 block.
- */
-struct s3c2412_iobank_timing {
- unsigned int idcy;
- unsigned int wstrd;
- unsigned int wstwr;
- unsigned int wstoen;
- unsigned int wstwen;
- unsigned int wstbrd;
-
- /* register cache */
- unsigned char smbidcyr;
- unsigned char smbwstrd;
- unsigned char smbwstwr;
- unsigned char smbwstoen;
- unsigned char smbwstwen;
- unsigned char smbwstbrd;
-};
-
-union s3c_iobank {
- struct s3c2410_iobank_timing *io_2410;
- struct s3c2412_iobank_timing *io_2412;
-};
-
-/**
- * struct s3c_iotimings - Chip IO timings holder
- * @bank: The timings for each IO bank.
- */
-struct s3c_iotimings {
- union s3c_iobank bank[MAX_BANKS];
-};
-
-/**
- * struct s3c_plltab - PLL table information.
- * @vals: List of PLL values.
- * @size: Size of the PLL table @vals.
- */
-struct s3c_plltab {
- struct s3c_pllval *vals;
- int size;
-};
-
-/**
- * struct s3c_cpufreq_config - current cpu frequency configuration
- * @freq: The current settings for the core clocks.
- * @max: Maxium settings, derived from core, board and user settings.
- * @pll: The PLL table entry for the current PLL settings.
- * @divs: The divisor settings for the core clocks.
- * @info: The current core driver information.
- * @board: The information for the board we are running on.
- * @lock_pll: Set if the PLL settings cannot be changed.
- *
- * This is for the core drivers that need to know information about
- * the current settings and values. It should not be needed by any
- * device drivers.
-*/
-struct s3c_cpufreq_config {
- struct s3c_freq freq;
- struct s3c_freq max;
- struct clk *mpll;
- struct cpufreq_frequency_table pll;
- struct s3c_clkdivs divs;
- struct s3c_cpufreq_info *info; /* for core, not drivers */
- struct s3c_cpufreq_board *board;
-
- unsigned int lock_pll:1;
-};
-
-/**
- * struct s3c_cpufreq_info - Information for the CPU frequency driver.
- * @name: The name of this implementation.
- * @max: The maximum frequencies for the system.
- * @latency: Transition latency to give to cpufreq.
- * @locktime_m: The lock-time in uS for the MPLL.
- * @locktime_u: The lock-time in uS for the UPLL.
- * @locttime_bits: The number of bits each LOCKTIME field.
- * @need_pll: Set if this driver needs to change the PLL values to achieve
- * any frequency changes. This is really only need by devices like the
- * S3C2410 where there is no or limited divider between the PLL and the
- * ARMCLK.
- * @get_iotiming: Get the current IO timing data, mainly for use at start.
- * @set_iotiming: Update the IO timings from the cached copies calculated
- * from the @calc_iotiming entry when changing the frequency.
- * @calc_iotiming: Calculate and update the cached copies of the IO timings
- * from the newly calculated frequencies.
- * @calc_freqtable: Calculate (fill in) the given frequency table from the
- * current frequency configuration. If the table passed in is NULL,
- * then the return is the number of elements to be filled for allocation
- * of the table.
- * @set_refresh: Set the memory refresh configuration.
- * @set_fvco: Set the PLL frequencies.
- * @set_divs: Update the clock divisors.
- * @calc_divs: Calculate the clock divisors.
- */
-struct s3c_cpufreq_info {
- const char *name;
- struct s3c_freq max;
-
- unsigned int latency;
-
- unsigned int locktime_m;
- unsigned int locktime_u;
- unsigned char locktime_bits;
-
- unsigned int need_pll:1;
-
- /* driver routines */
-
- int (*get_iotiming)(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
-
- void (*set_iotiming)(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
-
- int (*calc_iotiming)(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
-
- int (*calc_freqtable)(struct s3c_cpufreq_config *cfg,
- struct cpufreq_frequency_table *t,
- size_t table_size);
-
- void (*debug_io_show)(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob);
-
- void (*set_refresh)(struct s3c_cpufreq_config *cfg);
- void (*set_fvco)(struct s3c_cpufreq_config *cfg);
- void (*set_divs)(struct s3c_cpufreq_config *cfg);
- int (*calc_divs)(struct s3c_cpufreq_config *cfg);
-};
-
-extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
-
-extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
- unsigned int plls_no);
-
-/* exports and utilities for debugfs */
-extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
-extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
-
-#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS
-#define s3c_cpufreq_debugfs_call(x) x
-#else
-#define s3c_cpufreq_debugfs_call(x) NULL
-#endif
-
-/* Useful utility functions. */
-
-extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
-
-/* S3C2410 and compatible exported functions */
-
-extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
-extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
-
-#ifdef CONFIG_S3C2410_IOTIMING
-extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob);
-
-extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *iot);
-
-extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
-
-extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *iot);
-#else
-#define s3c2410_iotiming_debugfs NULL
-#define s3c2410_iotiming_calc NULL
-#define s3c2410_iotiming_get NULL
-#define s3c2410_iotiming_set NULL
-#endif /* CONFIG_S3C2410_IOTIMING */
-
-/* S3C2412 compatible routines */
-
-#ifdef CONFIG_S3C2412_IOTIMING
-extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob);
-
-extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
-
-extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *iot);
-
-extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *iot);
-extern void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
-#else
-#define s3c2412_iotiming_debugfs NULL
-#define s3c2412_iotiming_calc NULL
-#define s3c2412_iotiming_get NULL
-#define s3c2412_iotiming_set NULL
-#endif /* CONFIG_S3C2412_IOTIMING */
-
-#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG
-#define s3c_freq_dbg(x...) printk(KERN_INFO x)
-#else
-#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */
-
-#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG
-#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
-#else
-#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */
-
-static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
- int index, size_t table_size,
- unsigned int freq)
-{
- if (index < 0)
- return index;
-
- if (table) {
- if (index >= table_size)
- return -ENOMEM;
-
- s3c_freq_dbg("%s: { %d = %u kHz }\n",
- __func__, index, freq);
-
- table[index].driver_data = index;
- table[index].frequency = freq;
- }
-
- return index + 1;
-}
-
-u32 s3c2440_read_camdivn(void);
-void s3c2440_write_camdivn(u32 camdiv);
-u32 s3c24xx_read_clkdivn(void);
-void s3c24xx_write_clkdivn(u32 clkdiv);
-u32 s3c24xx_read_mpllcon(void);
-void s3c24xx_write_locktime(u32 locktime);
-
-#endif
--
GitLab