From 1a57c286d8ced1e4144c6201a19bbb70827edee6 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Sun, 4 Sep 2016 21:45:56 +0100
Subject: [PATCH] ARM: pxa/lubbock: add pcmcia clock
Add the required PCMCIA clock for the SA1111 "1800" device. This clock
is used to compute timing information for the PCMCIA interface in the
SoC device, rather than the SA1111. Hence, the provision of this clock
is a convenience for the driver and does not reflect the hardware, so
this must not be copied into DT.
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
arch/arm/mach-pxa/lubbock.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 7245f3359564f..d6159f8ef0c24 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -137,6 +137,18 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
// no D+ pullup; lubbock can't connect/disconnect in software
};
+static void lubbock_init_pcmcia(void)
+{
+ struct clk *clk;
+
+ /* Add an alias for the SA1111 PCMCIA clock */
+ clk = clk_get_sys("pxa2xx-pcmcia", NULL);
+ if (!IS_ERR(clk)) {
+ clkdev_create(clk, NULL, "1800");
+ clk_put(clk);
+ }
+}
+
static struct resource sa1111_resources[] = {
[0] = {
.start = 0x10000000,
@@ -467,6 +479,8 @@ static void __init lubbock_init(void)
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
+ lubbock_init_pcmcia();
+
clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
pxa_set_udc_info(&udc_info);
pxa_set_fb_info(NULL, &sharp_lm8v31);
--
GitLab